Did you do any tuning for the FN2?

自分は１０年位前にＦＮ２とＦＤ２を悩んで、ＦＮ２が社外２ＤＩＮナビが付けられない事と値段が若干高い事で、ＦＤ２の方を選びました。スタイリングはＦＮ２の方が好きだったんですが。その翌年くらいにＦＮ２も社外２ＤＩＮナビが付けられるようになりましたね。そんな事で選ぶのはナンセンスなんでしょうけど、、、

Me too :) love mine from England

I liked the accord type r too

@@ltaper yeap accord r is better imo

fd2 is better bc rear suspension in fn2 is no independant and a ancient desing like old peugeots

MElekiaZ and yet it can keep up in the corners 🤷‍♂️

MElekiaZ megane rs has torsion bar and it’s one the best handling hot hatches ever

@@aijfenf4ljrwhugw285it's modified vs what looks to be a stock fd2

@@MElekiaZ That´s why the fn2 ´s rear is sliding all over the place, even with spoon´s strengthening bracket.

タイヤがまず違うよ

Because of emission that is why.

I'd like to point that it is spoon version so I wouldn't be surprised if they had messed around the ECU and engine. You can see the cover is different color meaning there was some work done to it (obviously beside painting the cover)

This is a Spoon FN2. Its got a K20a swap. K20as make 250 hp with simple mods. The FN2 originally came with with a K20z4 engine with 198 hp like you said.

Yepp and because this is spoon, they should already mess around with the suspension too

@@saradomin88 I think they rebuilt and blueprinted the original engine instead. The RSP cylinder head casting is the same between the FD2 version of the K20A and the K20Z4 in the FN2, they are both the revised improved casting compared to the RBC version in the earlier gen or the FA5/FG2. From what I recall, Spoon kept the original RSP long-runner intake manifold too, instead of going for an RRC from the K20A. The only difference between the physical K20A & K20Z4 engines are the compression of the pistons, the oil pump assembly and the cam profile (crankshaft, valves, conrods etc are all the same). So if Spoon just rebuilt the original engine with higher compression pistons, the K20A oil pump (& matching baffled sump) and put in their Spoon cams, then it would be identical (or superior) to a K20A long block anyway. :)

MElekiaZ - I would want the 226 hp from fd2 in the fn2. I really prefer the looks of the fn2, but I agree with you anyway. Why keeping a 226 hp model only for them selves?

@@steelbear4887 because JDM K20A failed to meet european emission requirement that is why..

タイプrユーロね

spoon fd2 is undriveable, look the videos. porpoisings in corners every time

Clutch kick. You can use this if you need to raise the revs up when you are in a higher gear. For example if you went into a corner in 3rd, instead of second and your revs have dropped, you can kick the clutch while on throttle to raise the revs and help acceleration without changing down a gear.

@@raoulb69 Why i had ACT Heavy duty clutch in EG6 could do it all day long :D

ハイブリッドモデルとかも見た目はなんだかんだかっこいいですよね

Kamen Rider Joker左 翔太郎 σ(ﾟ∀ﾟ)ｵﾚﾓｵﾚﾓ 4ドアだったり軽かったりでほんと好き

僕もシビックタイプR FD2が大好きです。

途中で止めたら、クワガタ

h y それもそれでありかも笑

fn2もっしょw

It's a spoon version, so far from stock.

Yeah...250hp

FN2 is 250PS (Spoon edition) with lots of bars to stiff the chassis installed. 1320kg + weight of new bars so maybe 1330-1340kg FD2 is 225PS (Stock) and the entire car looks stock to be honest. 1270kg The FD2 has a longer wheelbase and is lighter making it a much more stable car in high speed bends. The chassis on the FD2 is far more technically advanced too, with use of lighter, but stronger materials and more welds. However the the extra bit of power and shorter wheelbase make the FN2 much more agile in the tight bends. The FD2 is on 18inch wheels vs the FN2's 17 inch. For this track it gave the FN2 the advantage as it was able to accelerate quicker out of the corners, due to less unsprung weight as well as less inertia. If I had to choose I would pick the fn2. not because it won, but it's just a far better looking car. The FD2 is a better built civic though. But if i COULD really choose, it would have to be the FN2 Mugen. 260PS, more torque, lighter, better looking again over the standard type r fn2.

@@rotatingglasssafe the same here 👍🏻

All that work to just and I mean just beat the stock fd😂😂😂

@@Juicyshadowz These days the FD2R is around 3x the price of an FN2 (with good examples of the FD2R asking as much as a one or two-year-old FK8R!), so I'm not sure it is worth the premium, then again it is a future classic, and the FN2 is not, so I dunno. But the FN2 is much more comfy, so it does the role of a Prelude VTEC type everyday car better. If you just want to go as fast as possible with a circuit Civic, you could do a K20A swap into an EK or EG. :)

sure, what about putting fd's k20a engine (as stock as possible) inside an fn? I can guarantee fd wouldn't even be able to put a gap between both. Maybe it might lead through out the whole race, but i'd say it's gonna be a neck and neck race. No cap.

@@mewffhin so both cars same engine would be the same but.... The FN2 is heavier and diffrent gear ratios so I'd say it would get left behind if done as a hot lap both done by the same driver

まずよく読んで理解してから反応返してもらえるとありがたい。 実際に速い遅いの話しじゃないです。 満足度が大切っていう話しです。

aegis higuma 装備が整ってるってのは凄く重要だったりするよ めっちゃ重要だとも！ でも俺は｢速い車にする為にわざと｣ストラットにしたり、4ドアだったり、それでいて鈴鹿のラップタイムが殆どの国産280勢より上だったりとロマンマシマシなFD2のが好き！

僕もFD2の方が好きです。

僕はシビックタイプR FD2が一番好きです。

わかってますねぇ。 わかり会える相手がいて良かったです。

くやちいいいいい！