Sound clips of stock exhaust, stock with 1/2 hole drilled in baffle, 3" Cobra slip ons, and ending with STG Ground Pounders.
Пікірлер: 35
@MattyMothaFuckinIce4 жыл бұрын
those ground pounders sound bad ass
@hdaviator91816 жыл бұрын
The stock exhaust sounds better than the new Harleys.
@whatarethose22026 жыл бұрын
Yes it does sound better. I have ridden both the Honda 1300cc and the 2018 Harley Softail 107. Stock 2018 Softail Harley = soft Japanese sound, stock Honda Fury = beefy Harley sound.
@thomasowens60415 жыл бұрын
Or at least as good. Sound way more reliable 😉
@jazzykingjack28463 жыл бұрын
The failure rate after 4 years with a Honda motorcycle is 12% as compared to a Harley Davidson which is 26% and this is research that I did a little while ago. Also love the stock exhaust.
@jaycee69063 жыл бұрын
I burned my leg so many times on that ground pounder exhaust
@gphilipc20317 жыл бұрын
I vote the Cobras.
@giovannidaru68296 жыл бұрын
Fantastico 👍🏻👍🏻👍🏻 super FURY
@travelingbrother35763 жыл бұрын
Beautiful bike. I thought I was tripping, I’m like why the bike keep changing in every video 😂 🤦🏿♂️. I just woke up 😂 my brain wasn’t fully on.
@mtyler2954 жыл бұрын
Did the holes in the bath oils of the original exhaust make a big difference at all and sound wise and accelerating wise and give it a little bit more throaty sound
@kirklima16404 жыл бұрын
what brand of forward controls are those? I like the side pegs.
@metalheadarno89147 жыл бұрын
do you think this bike would be good for a starter/intermediate rider?
@krizzleeeqwe7 жыл бұрын
Where did you get your air intake? I like it and where do you buy most of your accessories at like mirrors and so fourth? Thanks so much.
@poolboybiff17 жыл бұрын
I have a link in my other fury video for the intake. I bought it on Amazon and used the Kuryakyn Velacipitor intakes adapter. Mirrors were Amazon too though they don't sell them anymore.
@tra_vis96262 жыл бұрын
How’s you black out your headlight enclosure plastic dip?
@boatyMcBoaterton6 жыл бұрын
That last set looked like shyt...
@michaeladams21513 жыл бұрын
Whats that idle set at? It sounds quite a bit lower than stock
@allaroundguy19807 жыл бұрын
Did you do anything else to the bike computer after slip on installation or it was just plug and done? Thanks
@wolfperformancecycles93925 жыл бұрын
mrjtful Boy yes you should always
@grimreefer51594 жыл бұрын
it depends on the extent of the exhaust and how much more free flowing it is... with the high flow air filter and extremely free flowing exhaust, yeah a tune would be needed. with just the 3 inch slip ons or drilled factory exhaust, you could get by without a tuner. As a general rule of thumb, if you don't notice a performance decrease or idle roughness or anything like that, then you don't need a tuner.
@UkranianMacho7 жыл бұрын
how did you do the American flag on your speedo?
@poolboybiff17 жыл бұрын
Gravestarr Customs will make anything you want. I emailed him a description of what I wanted and he drew it out. We emailed back and forth a couple times to change/add some things. $35 and a week later it was in my mailbox. gravesj44.m.webs.com
@louisvilaros90662 жыл бұрын
Put the stock exhaust back on sounded better plus u won't burn the shit out of your leg nice looking bike ride safe
@user-sl3jw2oi5c2 жыл бұрын
الصوت فيه مقووووووووووووووووووود
@spanky5226 жыл бұрын
The last ones look like you got them out of a junk yard.
@poolboybiff16 жыл бұрын
lol
@Tremonius4 жыл бұрын
@@poolboybiff1 what are those? sideshots?
@PainterD542 жыл бұрын
Those so called "ground pounders" are dangerous. How the hell do you put your foot down to stop? You'd burn the shit out of your leg and ankle!
@paulkempen38047 жыл бұрын
Hi, how did you dril the hole in to the stock exhaust. thx
@poolboybiff17 жыл бұрын
If you look at the back of the muffler there are two small holes. I took a 12" long 1/2 " drill bit and drilled each of those holes into 1/2" holes.
@paulkempen38047 жыл бұрын
poolboybiff1 . what did you do whit the pieces you drild out. did they om out easy. thx
@poolboybiff17 жыл бұрын
The material I drilled out was more of a dust than chunks. I did take a magnetic wand up the holes at first but not much came out. When you start the bike the exhaust pressure will push out the rest.
@paulkempen38047 жыл бұрын
poolboybiff1 ok thx for the info en your time
@paulkempen38047 жыл бұрын
I thinking to lower may fury do you now enybody ho has done this. Is already very low so I heve somme litle douwts