Stained Glass DIY - Triangle Project 2 ways

Рет қаралды 15,075

2 жыл бұрын

Hope you're doing well, it's been too long! Here's a stained glass project that I think should be nice and easy for beginners, all straight cuts and of course simple geometric shapes. You can hang them a couple different ways and we also dive into using hobby came (thin lead came strips) so you get an idea of how it works with our glass.
They look good and now I have two of them!
▶Stained Glass DIY Kits◀
stainedglassdiy.com/shop
▶SGDIY glass packs◀
bit.ly/glasspacks
▶Glass grinder discount◀
$15 OFF Inland Craft grinders bit.ly/2Y1Out9
USE CODE: SGDIY at checkout
10% OFF accessories with code SGDIY10, codes can't be combined.
inlandcraft.com/
Hobby came I bought:
5/64RU Round U came for outside borders geni.us/5-64ru
3/32RH Round H came for inside pieces (store purchase)
Stretch lead came with this vise:
geni.us/leadvise
Square workboard + Nails
bit.ly/3BQAOSP
Coffee support 🙏
ko-fi.com/stainedglassdiy
💎 STAINED GLASS DIY 🔮
TOOLS FOR PROJECTS:
Most popular glass cutter bit.ly/2VJ1169
Cutting oil geni.us/GAIcuttingoil
Running pliers geni.us/runningpliers
Grozing/breaking pliers geni.us/breakergrozer
Grinding stone geni.us/grindingstone
Glass grinder bit.ly/2Y1Out9
($15 OFF Inland Craft grinders bit.ly/2Y1Out9
USE CODE: SGDIY at checkout)
Copper foil silver back geni.us/copperfoilsilver
Fid tool geni.us/fidpack
Rubber gloves geni.us/latexglove
Flux geni.us/novacanflux
Flux brush geni.us/fluxbrush
Solder geni.us/mastercraft
BEST soldering iron geni.us/hakkofx601
Smoke absorber geni.us/smokeabsorber
Half mask geni.us/3Mhalf
Mask filter geni.us/3Mfilter
Mini vise geni.us/minivise
Vise speed handle geni.us/minivisehandle
Jump rings geni.us/jumprings
Nose pliers geni.us/nosepliers
CJ's Flux remover geni.us/fluxremover
Cleaning brushes geni.us/assortedbrush
Kwik clean geni.us/kwikclean
Fine steel wool geni.us/0000wool
Cable chain geni.us/cablechain
If you're a newbie at stained glass, you're at the right place. Check out these links below to learn more:
▶FREE starter guide and 3 feathers pattern◀
stainedglassdiy.com/starter-g...
▶Full beginner tutorial◀
stainedglassdiy.com/how-to/
My current tools kit
kit.co/stainedglassdiy
*********************************************************
✌️ Like my content? You can buy me a coffee! ☕️
ko-fi.com/stainedglassdiy
Connect with me:
➞ allmylinks.com/stainedglassdiy
Learn more at:
www.stainedglassdiy.com
#stainedglassdiy #stainedglass

Пікірлер: 44

@katiatwood 2 жыл бұрын

I really love that you included your mistakes! As a beginner, it is inspiring to see not only that mistakes are made by everyone, but the way you tackle the problem and find the solution is spot on. Great job and thank you! Best way to learn is by mistakes. In the end, the pieces were perfect.

@StainedGlassDIY 2 жыл бұрын

Thanks for noting that! Mistakes happen all the time and I rarely get through a perfect project 😂 Getting it right in the end is super satisfying for sure.

@Joe-nu4rm Жыл бұрын

There was a triangle shelf video I watched recently that I also appreciated the mistake because I could totally see myself doing the same, and to show the easy fix was satisfying

@barbarab202 2 жыл бұрын

Use a fid to open up the hobby came slightly.

@jss3018 Жыл бұрын

On the non-copper foiled one, just copper foil the long edge, then you can hang without sag. Thanks. Nice show.

@loripeterson5403 2 жыл бұрын

love it that you show the "oops" along with the perfect pieces

@rkem139 2 жыл бұрын

Thanks for the video. So happy to see more stained glass channels that show how to do it without tons of tools and equipment. If you putty your lead came piece you may end up with have a better hold on the glass, and when you brush it with a coir brush and whiting, it will darken the came and take care of any scratch marks. Also, I've rarely seen such an impeccably clean grinder. 😄

@StainedGlassDIY 2 жыл бұрын

Hey RK, thanks for tips. Would've helped for sure. yea the grinder stays pretty clean due to lack of use 😂

@lindahobster7480 9 ай бұрын

You need a pair of stained glass scissors. They cut a small amount away from the edges of your pattern to allow for the thickness of tape you add later and save having to waste tape by re grinding

@kerianneodwyer8800 2 жыл бұрын

man can i just say that i am just getting back into stained glass and made a christmas list based on what you use. now i have basically the same set up, but inland grinder lol

@sorscha 2 жыл бұрын

For hanging loops, I was taught to use a piece of wire long enough to be soldered an inch or so either side of the loop to make sure it's strong enough. Love the glass choices here.

@StainedGlassDIY 2 жыл бұрын

Certainly a smart thing to do for strength, thanks for the tip!

@KS-xd8zi Жыл бұрын

I love how you showed two ways to do it on the same type of project, it was really nice to see the comparison.

@sallyjoligocki5011 2 жыл бұрын

Thank you! I am new to stained glass and you have given great tips.

@namratasharma6424 2 жыл бұрын

Wow sir another beautiful art to learn thank you so much for sharing this valuable knowledge.

@vickiemeisinger9632 Жыл бұрын

This is really a beautiful corner piece and it doesn’t matter what color do you use it is classic no matter where you hang it yes it is classic design and I really love it. You do such nice work♥️♥️♥️♥️♥️ you also do very nice soldering to make your pieces look stunning and I always learn something from you every time I watch your videos. I know this video is old and I watched it before but I have been revisiting your videos to refresh in my mind on Stainglass techniques since I’m not able to solder lately😂😂

@lindahobster7480 Жыл бұрын

I copper foil then use hobby came around the perimeter x

@sarahhall5920 2 жыл бұрын

Really cool. I like that you have multiple ways to hang it! 😌

@StainedGlassDIY 2 жыл бұрын

Best to have options 😁

@KauaiDee Жыл бұрын

I am a stained glass newb and I must say I love your videos! Love the style of quick transitions thru the grinding process and including your mistakes. Seeing how you get through a project helps me think through mine a bit more and be more forgiving when I make mistakes of my own. Going to have to give this design a try!

@shirleyward5230 2 жыл бұрын

Enjoyed you and loved your beginner stained glass

@Anna-zt6sr 2 жыл бұрын

I've seen people line the outer edges with foil and strategically solder the bordering lead came to the foil on the outer edges to avoid that pulling off in designs like this, where there's a long edge of lead came with no solder points. It still has that super clean look you get from came, but I imagine it takes some practice to make it look so good haha

@StainedGlassDIY 2 жыл бұрын

Oh that sounds like a nice trick but I'll have to figure out how they do it in the first place 😅

@anaschilling2668 2 жыл бұрын

Love your lessons! More projects for beginners please 🙏🙏Happy holydays 🎄🎄🌟💕

@jamilemmond3393 2 жыл бұрын

Love your channel. Please keep posting as I am learning so much from you.

@H.Cc. 2 жыл бұрын

Thank you! This job is amazing!! Hello from little Russian city🤗

@StainedGlassDIY 2 жыл бұрын

Thank you so much!!

@linn6980 Жыл бұрын

FF2023, it came to mind that using a fid to open the hobby came channel a bit for a tad thicker glass might work instead of redong glass or came.

@samharman198 2 жыл бұрын

Thanks great to see the comparison.

@TheFiredog3 2 жыл бұрын

Like watching your videos, retiring soon and going to get back into stain glass, I believe there’s a special pair of scissors you use to cut out your pattern that takes out a skinny piece of paper that represents the thickness of the copper foil or lead came.

@StainedGlassDIY 2 жыл бұрын

You're right Jesse, the lead shears or foil shears could help. In my case, this was error from tracing and forgetting about keeping all sides equal at all times. Happy retirement!

@leniimgrunen9515 2 жыл бұрын

Maby you like that video... "Wie man ein Kirchenfenster macht" by Swr Habdwerkskunst. Its in german but you can see some interesting tools. Thanks for your video!

@anaschilling2668 2 жыл бұрын

Love your projects, specially beginners! Very inspirational 🙏🌟

@StainedGlassDIY 2 жыл бұрын

Thank you so much!

@Pumpkinheadseeds 2 жыл бұрын

Hello!! Do you have any suggestions on how to copper foil textured glass? Thank you! Love your channel!

@theresevarney4715 Жыл бұрын

This is an older video so you probably know how to widen your lead hobby came channel now but, for those who don't, you can use a fid at an angle and run it through the channel. This should widen the channel enough so the glass will fit. 😊