👇WeldTube Store👇 www.weldlife.com

In your videos can yall show what the root pass looks like on the back end of the plate?

Man... y’all are the best! Thanks to your tips I won a welding competition! Much love for y’all !keep uploading videos🤙🏽

Thanks alot sir for the teachings it has been helping me a lot. I am a welding student based in Cameroon and presently at 4G i have been following your teachings from 1G till now. Thanks alot for you have been a source of inspiration to me

Rosendo, I owe you big time brother for this welding vid - I changed up my root pass technique to the one you use (side to side) and reversed grip on the stinger (the way you hold it) and my quality of 4 G Welds SMAW shot up literally in an instance. Thank you Mate! Alex, New Zealand

Nicely done! Very well explained! Thank you! Be blessed guys!

I wish I was able to do this online but it is such a technical thing. Once schools open, Imma try this to prove that I have been learning.

Thanks alot sir for the teachings, i have been able to use your techniques to better my skills in school

Great demonstration and explanation Rosendo 🤘🔥 Semper Fi Brother.

This is my channel, baby. Great teaching. Greatness. Thanks. Got an overhead test for tomorrow. Bout to go in prepared now. Thank you.

Big help 🙏 been practicing in my garage with my old man his 75 old school welder but sometimes we bump heads lol then we chug a beer about it love you pops

You’re use of the word standby motivates me

Shoutout all the guys at WeldTube! You guys are some of the best welders out there, and great guys in general.

Thanks a lot. Any one can develop their wedding knowledge. Good job my friend.

This video helped me before going in for a welding test.

Thank you sir,it help me a lot.Good day and God bless.

Awesome video!!! Just what i needed. Thank you!

Rosendo! I was scrolling through utube and u popped up. love ur work bro.

I need to get out of my current welding school and get into this one. Damn it, man.

Very good video well explain. Keep making more videos

great refresher guys thanx 😁👍

You guys will be rewarded for doing God's work!🙏

Love it good pass root welding very well done.😊😊😊

Going to a good cause, good job guys.

Thanks for your videos that you share us its very helpful on us ... Thank you ....

I'm in school rn and I just went up to over head moved up from vertical bevel this video is great has a lot of information

You have a nice weld there. And I love your welding max

Thanks so much it's very help me

Thank you for sharing this video overhead welding

I love how easy yall break it down. I just got into a school for welding and our certs will be 3-4g and if we pass those we do 6G if we fail they put us down to 1 and 2 so im watching all yalls videos i can. Also i was wondering if yall could show a 6G with Stick. I notice yall have Mig and tig but no stick

Thanks

taking notes! 👍🏼😲 good shit bro you explained so much this video really helped out a lot.

good stuff thanks for the tips!

Watching this makes me want to make KZfaq videos these guy struggle with so much but they get the job done.

I love this lesson

Don’t have much right now but I did what I could. God bless

Great tutorial bro!

Ya'll doing great job 👍

Tnx bro,,,,it's really good way to good weld!!

Bro you explained it so well 💸💸💰

Great video… ok…nice root…ok…ok

Video came out badass

VERY VERY WELL. GREETINGS FROM CAMPECHE, MÉXICO.

Nicely done! Very well explained! Thank you

Si señor muy buena soldadura

GRACIAS POR COMPARTIR ESTE INTERESANTE VIDEO. SALUDOS DESDE HOLLYWOOD FL , USA.

Soy de panama hacen buenas obras los felicito

I really like your vedios keep it up

Sempurna👍👍

Magnífico

I like your video it's good....

Thank u sir

Respect in Morocco 💙❤💪

When I would mig 4f fluxcore 045 I always burned through when I stayed but the rest of the weld was beautiful and had penetration, our test was on some thin ass plate too. Can’t remember the size but I still passed even though they wanted to fail me. I retook that test 3 times and still had the same out come blew through at the start perfect the rest of the way. I like 5F the most so simple. I worked at Trinity Rail

Perfect 👍😍

perfect Bro

Nice one brader

Weri good welding

Should I be at a certain angel when welding over head and is it bad to push instead of pulling because I notice myself getting out of place once I’m mid ways down the weld I gotta test this Friday and I’m just wondering if it bad to start off pulling and end off pushing

Cleaning and visually examining the penetration from your initial root pass on the back side of your plate is a great method of checking for lack of fusion, incomplete tie ins, and the amount of convexity of your root pass. I noticed that you neglected to mention any of these points in your video.. Didn't hear any mention of the recommended rod angle that you are using during this demonstration. Is your 7018 fill rod a 1/8th or 3/32nd electrode. However, you did cover a lot of great points in your video especially for folks starting out.

Big up WT👌🍁

Serious question, why did you not use stich method on root pass like 2g and 3g

Teachers teachers achievers

Thanks for the video, teachers. Is the current AC or DC? 🙏

You are majaro am so happy capit up very good lecher

I run the dollar bill gap (1/16 for those that don't know) with feathered edges. I run my root at 120 amps while the stick is at a 45 degree angle. My roote come out perfectly but it's my fillers that are killing me because of the inconsistencies I keep having

Hi! I would like to ask you ,where I can buy welding mask like your?Thanks!

watch the opening if you whip it rod to the left look at the gap to the right

Great thing to donate. God bless amen. Appreciate the videos.

I would like to know why you chose to use the 6010 electrode for the hot pass. Is there an advantage to using the 6010 instead of 7018 electrode?

this dude is definitely giving a hip pocket class 🤣

I'm glad you made this video but for demonstration I would rather you hotpassed 7018 instead.

My weld test has a back and doesn't allow grinding wheels or wire wheels. What techniques do I use for the root pass with a back plate. Please get back with me before tomorrow. If not then dont worry about it

Where did you buy that welding jacket from?

Great show to learn from! Maybe FR clothing ? industry requirements !!!

My instructor is making us use 7018 for the root pass

Whats a good welding machine to practice welding at home put on pipe i bought a cheap one but doesn’t work what’s a good machine for home welding to practice on pipe

I’m taking this test at a factory nearby and I haven’t don’t this type of welding in about 3 years lol I’m nervous

Awesome.. and i have a ❓, don't you get any puddle drops on you face that way? Or how do you avoid the puddle drops? Thanks and all I've learned, i learned it watching your videos guys.. From Michoacán Mexico saludos

For the root must electrodes thinner?

watch the opening , you whip it to the left look at the gap to the right

Can’t find link on my phone to donate

Seems like I wasn’t the first 50 to donate. Think I was a little late watching this video

Can I use 7018 for root pass?

What is the brand of your welding mask??

I’m school I would always do 66-68 amps for the root, everyone else always used around 72-75 amps for there root and still got it I could never get it the key hole would open up to much and if always blow through that’s why I always ran cold and now seeing you do 85-95 blows my mind. What do you think I was doing wrong that I couldn’t control my root and how can I fix it? Thanks in advanced btw

Bro, i didn’t see your root pass both side. Did I miss or didn’t you show? Please 🙏 I was waiting for see your root pass upside

Maybe its just my machine, but I can't keep my rod lit with less than 100 amps with 1/8 rod. It just goes dark few movements in...

Can you please explain what you mean when you say clean all of the “trash” out of the root?

What's the electrode angle for 4g overhead

The Greatest Leader In The World!! #legend #royalty #AARON

Hello, i'm having a hard time seeing the weld puddle when pulling when doing the 7018 fill and cap. Any suggestions?

Quick question, what is the price of your school?

Okay.

You didn't show us what your root run looked like on the reverse side (cowboy welder)

This account has helped me so much but how on earth do I not catch on fire on overhead no matter what I wear

How long are the plates

Shout out to stony for teaching me good techniques

Why they never show the result of the weld I’m trynna see how that root came out

How about the root pass is it zigzag?