👇WeldTube Store👇 www.weldlife.com

I liked that the aussie was more or less "ima just weld this pipe up gap or tight." Travis breaks it down to a level for someone that's never welded pipe before. Sometimes you gotta go the aussie way and just weld the damn thing.

More Travis. He's the man. I remember watching videos of him using the described technique welding practice pipe off the back of his truck. Helped me a ton seeing him actually doing it. Thank you sir.

That was Epic, two of the guys i look up to welding it out and getting down ! Amazing how they can just jump in front of a camera with someone else's machine and just get it Done. Thanks all the boys at Weld Tube for bringing it to the big screen for us to watch !!

I love how watching weld tube, and watching it from the beginning and watching it grow, continuous, and the fellowship, when everyone comes together. And share all the sweet science. AND the art of Welding 💯 keep up the Awesome work, so many people are wat ching and Learining, and understanding.

Travis showing his body position and stepping you through his movement was awesome. Please consider integrating this into future videos.

I’ll like to see y’all collaborate with jody tips n tricks in the future

It's like the old bush pilot saying, "the only thing that will replace a DC-3 is another DC-3" I'm a veteran field, pressure welder, and the only thing I'll replace my old SA-200 K6090 with is another SA-200 K6090.

Klay from Chesham welding is the Shizzle Mcnizzle! not many words but the welds speak for them selves! Regards Paul from the land of the kangaroos.

My favorite part about travis is that hes the only youtube teach that talks about body positioning with pipe that’s important as fuck and itll help so much

THIS IS BY FAR MY FAVORITE EPISODE FROM YOU GUYS! Tavis is a 🐐 my aspirations.. 💪🏼

Great my friends as always! congratulations for both!

Travis is a welding wizard!!!!

Travis is da bomb. Representing the Alberta boys

damn Travis gloves really stay fresh throughout the whole vid & 6010, that’s how you know he knows what he’s doing 😉

Travis field the man hes a bad bad man.

You don't need to be playing music especially when someone is talking. Many of us old timers don't need a back ground noise to compete with.

Hi welding family when I'm out in the field welding 12inch I usually put a big tack on top and bottom. Then I run my root with a 5/32+ the reason I do that is because it only takes one rod on each side of the pipe to finish the root pass and it looks really nice, were usually moving quick out in the field. Its really quick you guys should try it. [Great video guys]

Awesome video!! It’s great seeing all these guys in the same room,TON of knowledge in the same small place at one!! Need this more often!! Keep up the videos fellas!!! Watching all the way from Arkansas!!

Yes it's nice to see a Western Canadian master in his field showing us how it's dun. I'm a retired Jman who can only wish my skill was even close when I was in it . lol .

Great explanation and find detail nice awesome welding Both of you

Great video you all do well with your info thanks a lot for all the info , and weldtube for helping us learn to burn love seeing Travis field he like my MVP in this field been watching him when I was in welding school , and his video on all his machine . He should make more video ,and on the job might be hard , but just saying . You all do great love you all for the info ., And keep do what you all doing , and Sharing.

Great job Thanks to all the WeldTube

Nice work Travis. Gerry must appreciate his name on the coat.

Still my favourite video, I love you guys

Mr Alberta is definitely the pipe champ there

The guy that talked less is the one with the better looking weld 🤷‍♂️

I like that, International Squad. I love Houston. Thanks for sharing.

Klay let's his welding speak for himself. Solid welds, always first class.

Awesome video, UP 10!!!!

Bro love these videos, much to weldtube

Travis field is like 💯 like a mad man In science .

Awesome demonstration 😁🤩

I'm just grateful to be here. Me: amen!

Nice arcs bruhs..

Nice to see fieldres!! yea yea yea!

Good body positioning explanation.

This is what people need to see!!!

Nice video much love yall from south Louisiana.. nice work.

Great video, I wish I was getting the same level of detailed instruction in my classes as Travis gives in this segment! Why do so many guys run those old Lincolns from the 60s, cost?

I’m pretty sure he was attempting to “Sonic Voice Fuse” that pipe together. But both guys definitely showed great knowledge and skill.

Unless I missed it while scrolling through the comments I wish we could get a close-up of the welds.

Awesome video!

nice weld guys.

Miller big blue 400 pro!!

Badass video! I wonder what the results would be if they had their own machines? Lincoln guy myself but that Pipe pro smoked that 200

Can y’all do a vid on that old school junior sa200 in the background to the right.

what machine was better? they should have compared the miller to a lincoln cross country 300. why has miller never made a generator? they keep trying to get the pipeliner market but they wont do it with the alternators they make. plug in machines are not like a DC generator

Awesome video. Great explanations but just wondering if y’all do any videos using the sa200 with scratch start rig on pipe. Whole diff beast than having a foot petal to Fall back on for fine tuning

Nice welder and nice welding 👌👌👌

Damn wish I could go to this school, but unfortunately I work 14/14 rotation😭

hjalmar excelentes tutoriales ,excelentes instructores esto nos sirve de gran ayuda en nuestras labores much

Nice shirts, I need one of those lol.

how much yall make in Australia rig welding?

Can you please tell me how much of amperage the second filler pass was welded? ... and how thick is the pipe?

What shirts are those?

It not the welding machine it's the welder I got a bobcat 250 and am very sure i do same job

Make a video how you guys work that bottom quarter ?

muchas gracias

Is it possible for you to do a in dept detail on how to weld 6g stainless steel tig?

Awesome vid. But where can i get one of those shirts tho!!

Who made those shirts. I want to get some made

muito top vocês são incríveis 👏👏 muitoo show manos.

Nice videos But can u do videos of the bottom on fill n cap

Show the welding

Anyone no what the paper setup with the pipeliner is?

Nice 👌🏻 weld.

Hell yea mate

Que video espectacular por favorcito es pañol quiero aprender mas

Is it true that in some parts of Canada they don't allow pancake hoods?

Soon as I heard the aussie accent I had to watch. Im american living in australia doing a boilermaker apprenticeship. love to burn learn and earn baby

were did you get those welding caps?

What stingers are they using?

Thats not a 66. Lincoln didn't start a stamp steel face plate until 68.

That lefty get‘ nit

Finally

I was thinking there was going to be a wager on this brother-in-law weld... David vs Goliath You know, you could hold weekly battles for you students to choose whether or not they want to enter. $5 to $30 to enter depending upon the coupon size... At the end of the week, the coupons are taken out and judged by the students themselves as well as the yourselves. Coupon is a split pipe with full root,.2/3 fill, and 1/3 cap. That gives them full access to the root, fill, cap, and the entire backside to judge. Each person has 2 votes; they are automatically given one for their own entry and their own coupon which is not presented to them as they judge the coupons as a whole. That way it's fair and they still have their own vote which nullifies counting their own coupon vote! So, they're judging and scoring only their competition. You'd have to number the coupons where they can't see it after each weld is presented with 3 random numbers to identify their coupons and the number is given a letter that you keep a key of for all entries. You can only tell them the letter that corresponds to the number in the key. That way they can't go off telling their numbers to their friends to split the pot and their letter won't do anything because they won't know the corresponding number that's on their coupon. End of the week, they judge them and after it's all over... You look at your key for final letter marking alongside numbers and each person can see their coupon number with letter when you call out the winner! Incentivized welding improvement that helps them in their daily lives. xample; 573-A ... 270-Z

✌️✌️✌️❤️❤️❤️

The guy with the pipe pro is burning way too cold.

Like his knee pads. I have another name for them.

🇹🇭🇹🇭🇹🇭🇹🇭🇹🇭welding.

Y’all never show the cap

Travis is running to cold

Miller looks better what can I say

ingles

The Lincon is off set.

IS THIS THE WAY YOU DO ON THE JOB,TALK,TALK,TALK AND DON'T FORGET TO ASK HIM A QUESTION,IS TALKING PERMITTED ON THE JOB?AS LONG AS YOU GET TO THE POINT AND KNOW SLEEPING ON THE CLOCK!GET TO THE POINT.YOU GUYS,I TELL YA,AND I'VE GOT TO BLINK MY RIGHT EYE 12 TIMES B 4 I BLINK MY LEFT EYE 1 TIME.AND THEN I SHOULD STOP TO RE-RIE MY SHOE LACE BUT IS IT BREAK TIME YET,OH AFTER I FINISH THE BEAD(WHICH I HAVEN'T STARTED YET BECAUSE I'VE BEEN TALKING,EXPLAINING ALL THIS).MAYBE WHEN I GET FINISHED(A YEAR FROM NOW)I'LL WRITE A BOOK,"PIPELINE WELDING".YOU KNOW THERES KNOW WAY THE GUY USING THE LINCOLN,HAS A GIRL FRIEND OR WIFE,NO WAY.HE NEVER GETS TO THE POINT.IS THIS THE WAY HE IS WITH WOMEN,IN THE SACK,HE DOESN'T GET TO THE POINT,JUST KEEPS ON TALKING.

2nd 😁👍

Music is too loud to hear people's introductions.

키가 커서 일하기 힘 들겠네요

Run uphill......

Eliminating Lincoln!!!!! Miller will always rule!!!! Miller is the best!!!!!

🇨🇦 loose the tongue stud . Should improve the clarity of your speech

That’s a Pro. Not a PipePro

First

its only gay if you're electrodes touch!!

Cnc machinist>>welders