Strike Industries Mass Driver Compensator For Glock 19 P80 Review!

Рет қаралды 71,263

4 жыл бұрын

Bought the new Strike Industries mass driver comp and threw it on my P80 Glock 19 build and tested her out. I was pleased with how much flatter the gun shot and how much quicker it was to pick up the red dot. A couple downsides I found to this comp however were how much of a pain it was to install, and the change of impact I encountered. Let me know if you have any questions and or comments! Link to P80 video without the SI comp below, watch at the 5:15 mark
• Apex Glock Failure Res...
Feel free to reach out to me with any questions or if you're interested in me doing a review of a product at Alpharomeo1five@gmail.com
Check out my Teespring store to help support the channel and look great at the same time! teespring.com/stores/alpharom...
Want to shoot steel? Check out the link below for awesome steel targets at a great great price!
shootingtargets7.myshopify.co...
I am not a professional, and have never claimed to be. Neither myself nor KZfaq are responsible for you, your safety, and/or your actions if you attempt anything seen in these videos. You are solely responsible for yourself. Shooting is a inherently dangerous activity. You should take all safety precautions into account while shooting and/or handling firearms. This channel and it's videos are to share my experiences, thoughts and opinions on various subjects and items mostly dealing with my love of the 2A. In case other video clips are shown in my videos they are being used for educational purposes and are covered under the fair share act. If you are still reading this, you know this is just to make sure I'm covering my butt! God bless you and yours, have a wonderful day!

Пікірлер: 220

@marcusinfestus1333 4 жыл бұрын

Yup, comps can change POI. So can a change in ammo. I'm figuring this stuff out the same way. Nice to know I'm not the only one.

@AlphaRomeoOneFive 4 жыл бұрын

I knew all of this with my rifles already, I don't know why I didn't think it would translate to pistols as well 😂 We live and learn I suppose!

@gunnwild1 4 жыл бұрын

It definitely has a cool factor. I put a comp on my 1911 and it changed the shot placement as well....it didn't stay on my gun very long

@AlphaRomeoOneFive 4 жыл бұрын

Yeah I hear you. To me it almost seems like you have to run it all the time or not at all. I'm not going to re zero my RMR every time I want to shoot it then re zero it again for my carry load. For now I just plink with it every now and then. I'd like to have a gun dedicated for it eventually

@ianhinkle2863 3 жыл бұрын

man I know. I love the look of this on my 19 but I just bought a gloxk 34 instead! and carry both

@Nidhoggr333 4 жыл бұрын

Thanks for the comp review. I may get one know..

@AlphaRomeoOneFive 4 жыл бұрын

You got it brother 👍🇺🇸

@NEPAGUNTALK 4 жыл бұрын

No pain, No gain... Lookin' good !

@AlphaRomeoOneFive 4 жыл бұрын

That's right brother! Only 57 more until you hit 1k!... not that I'm counting 😉

@NEPAGUNTALK 4 жыл бұрын

@@AlphaRomeoOneFive Sooon...

@AirgunEvolution Жыл бұрын

Is there enough clearance to remove the barrel with out removing the comp/guide rod assembly completely?

@Dremistic 4 жыл бұрын

I'm good you just uploaded this video. Not many vids on this. I ordered mine for my polymer 80 G19 as well and the damn mail messed up. Was suppose to get it today and shoot tomorrow. Now I gotta wait until Monday but seeing you video is great

@AlphaRomeoOneFive 4 жыл бұрын

Gotta love the postal system lol. You'll enjoy it once you get it installed! Let me know how you end up liking it

@Sh1tbagActual 3 жыл бұрын

The POI change is probably from the firearm staying flatter longer with the comp, and zeroing without it taking the snap of the recoil into account.

@AlphaRomeoOneFive 3 жыл бұрын

I think that's a pretty good idea as to what's causing it

@hasgunwilltravel6840 2 жыл бұрын

Bullets leave the barrel before the slide unlocks

@Sh1tbagActual 2 жыл бұрын

@@hasgunwilltravel6840 that doesn’t matter because the recoil impulse is already affecting the entire gun before the barrel unlocks from the slide as well.

@hasgunwilltravel6840 2 жыл бұрын

@@Sh1tbagActual nevermind it’s not worth it. Yep you are right. That is why.

@sodacan1011111111111 4 жыл бұрын

That looks pretty cool. But to me the only drawback is messing with the spring Everytime you wanted to do a complete tear down. But the added weight up front is a definite bonus

@AlphaRomeoOneFive 4 жыл бұрын

Agreed, and as someone who likes to shoot a lot and breaks down my guns to clean them every time that's a big negative. So far me at this point it's just an occasional plinking toy sin to speak. It definitely does work so you could leave it on a carry gun if you wanted but that won't be me lol

@jeffhutchins7048 11 ай бұрын

You can get the barrel out without removing the Mass Driver. Is it still in the waly when detail cleaning? Yes.

@shawnbalch6046 3 жыл бұрын

Cleaning becomes a pain, but the spring gets easier to install the 2nd time and anytime after that. Be careful when screwing the nut on. 25 in pounds is what is recommended.

@AlphaRomeoOneFive 3 жыл бұрын

Yeah it gets broken in the more you use it. I didn't know about the 25 inch pounds, thanks brother!

@2adave 4 жыл бұрын

Thanks for the video. Any chance that would fit on the sd9ve? They use the same guide rods as the G19.

@AlphaRomeoOneFive 4 жыл бұрын

I honestly don't have a clue. I'd reach out to SI and ask them. Their customer service is great and they got back to me quick both times I dealt with them.

@yeekyizzy917 11 ай бұрын

How long would it take if I order it on the website

@scottf.3808 4 жыл бұрын

Pretty cool pick up....Good stuff....

@AlphaRomeoOneFive 4 жыл бұрын

Thanks Scott 😊

@danabril2372 4 жыл бұрын

Great looking gun! I just got the same comp. hey bud, if you don’t mind me asking, where did you get your slide? Thanks. Also, amazing videos.

@AlphaRomeoOneFive 4 жыл бұрын

Thanks Dan! The slide is made by Thompson Leh, I bought it off of their eBay store a while back 🇺🇸

@davidblizzy9725 4 жыл бұрын

I had an issue with the feed it would feed after the first round it kept jamming after the first round any suggestions? I did have issues with the install on how to sit the curve part on the barrel

@AlphaRomeoOneFive 4 жыл бұрын

I just recorded a quick video for you on what I think your problem may be. Let me know if it helps you out kzfaq.info/get/bejne/m6t1Z9SExrjKloE.html

@levi123095 4 жыл бұрын

Definitely a pain in the butt to install it. I have to take mine to my local store to have installed.

@mauriciou 4 жыл бұрын

Beautiful gun

@AlphaRomeoOneFive 4 жыл бұрын

Thanks brother!

@RTACDaughters 4 жыл бұрын

I put a compensator on my 17 just to see how it would do and I really didn't see a notice a difference I have a threaded barrel for mine and I've got the thread type on it I just went ahead and took it off I couldn't tell difference

@AlphaRomeoOneFive 4 жыл бұрын

I haven't tested any other ones but this one made a big difference on mine. I've heard others say some comps definitely work better than others though

@RTACDaughters 4 жыл бұрын

@@AlphaRomeoOneFive I just gave you a shot out the video will be up soon . I just took my compensator off so you'll get to see it.

@AlphaRomeoOneFive 4 жыл бұрын

@@RTACDaughters Well that's certainly appreciated 😁

@transporter13956 2 жыл бұрын

I have the 17c and it does make a huge difference

@davidblizzy9725 4 жыл бұрын

Does the adapter plate grove side face the front or the grove face you

@AlphaRomeoOneFive 4 жыл бұрын

Hopefully you saw my other comment but if not I recorded a quick video for you. Drop a comment on that video and let me know if that helps kzfaq.info/get/bejne/m6t1Z9SExrjKloE.html

@jett0017 4 жыл бұрын

Looks badass like a John Wick race gun 💥💥👊

@AlphaRomeoOneFive 4 жыл бұрын

Yeah it does, just without the 4k+ price tag 😂

@ChristianGrest 4 жыл бұрын

That's a cool looking pistol comp. I like the concept of not needing a threaded barrel, but yea that assembly looks a bit rough. Cleaning your pistol will be more of a challenge. I only have 1 pistol comp and it's on my first P80 build you've seen many times I'm sure. It uses some shims to time and you have to use red thread locker or it'll come loose. Really aggravating if I want to take the barrel all the way off. Luckily I can clean the barrel with it still in the slide by tilting it down. Anyways, very nice review of this Strike comp. They seem to keep coming up with new ideas.

@AlphaRomeoOneFive 4 жыл бұрын

Yeah I like the fact that a threaded barrel wasn't needed as well. That's the main reason why I went with this one. Yeah that would be frustrating having to deal with that red lock tite whenever you needed it off. Strike Industries seems to come up with some pretty cool ideas and designs, I'm becoming quite a fan of theirs.

@josephsalazar2908 7 ай бұрын

You’re gonna have to re zero ur red dot with every new attachment or parts. That’s with every weapon. The slightest added weight in the front, rear, middle, top, bottom or even reduced weight can change the way the fire arm shoots

@GorillasGuns 4 жыл бұрын

Was that the Nepolian Dynamite version of range time... I'm not a glock fan , but after shooting Christian's p80 builds, I definitely would take one of those.. that compensator works well...

@AlphaRomeoOneFive 4 жыл бұрын

😂 that beat totally has that kind of vibe to it now that you mention it! It's one of the beats my nephew made. I'm fan of Glocks but don't currently own any if that makes sense. What I like about the P80 more though is the under cut on the trigger guard and the angle of the grip. Christian and I have talked a lot of P80 talk. He's has some nice builds, I'm looking forward to seeing how his new one turns out

@StevenL00 4 жыл бұрын

Can you still install lights/laser on the rail when you have that comp on?

@AlphaRomeoOneFive 4 жыл бұрын

You sure can. Both my Olights the PL mini and PL pro both fit fine

@ianhinkle2863 3 жыл бұрын

why does it change point of impact and if you wanted to keep it on could you just adjust sights to help?

@AlphaRomeoOneFive 3 жыл бұрын

Not sure why exactly it changes the poi as it's not connected directly to the barrel but it does. You'd be able to adjust your irons for windage but have to get sights adjustable for height to change that which these don't. If you're running a red dot like here it would be as simple as adjusting your dot to the new poi

@ianhinkle2863 3 жыл бұрын

would this fit a glock 30 45 acp? I ask cause my lower is a p80 but gen 4 upper

@AlphaRomeoOneFive 3 жыл бұрын

Honestly I don't know off hand if the brake itself is even big enough to fit 45 through it. I'd contatct strike industries and ask them, both times I had to contact them they were quick in getting back to me

@vrgamerz8823 10 ай бұрын

Did you get any baffle strikes. Seems this would stay straight under such high compression.

@AlphaRomeoOneFive 10 ай бұрын

I've not ever had a baffle strike or ever heard of one on a comped pistol

@joeygaribaldijr2770 2 жыл бұрын

Is the recoil spring rod that comes wit it mad of steel or plastic?

@AlphaRomeoOneFive 2 жыл бұрын

99% sure it's metal but I'm not home so I can't verify right this second

@Protectiveedgetraining 3 жыл бұрын

Have you found a good holster option for this, if so what kind?

@AlphaRomeoOneFive 3 жыл бұрын

I've not even looked for one honestly. I don't plan on ever carrying it with the comp on. I'd imagine it would work with most open bottom holsters, or by slightly modifying one.

@julioc2046 3 жыл бұрын

I found that g34 holster size would work for the g19 with this comp.

@Raptor-gd6sk 4 жыл бұрын

It looks good on it too.

@AlphaRomeoOneFive 4 жыл бұрын

Agreed, it is probably the best looking comp I've seen

@christinaabundiz1888 2 жыл бұрын

Beautiful pistol broo

@AlphaRomeoOneFive 2 жыл бұрын

Thanks!

@thomast6741 Жыл бұрын

Any updates on this comp? Have you found any issues with twisting or strikes during shooting?

@AlphaRomeoOneFive Жыл бұрын

I don't run it full time. I just toss it on occasionally when at the range. No issues with it whatsoever though

@thomast6741 Жыл бұрын

@@AlphaRomeoOneFive I just got mine and took it to the range. Put 200 rounds through it and find that my follow up sight acquisition was much faster. I had to change holsters to accommodate the additional length. I'll continue to use it for my EDC and see how it feels. I'll be switching up to a red dot very soon and that should also be a great test.

@Jerry-Parker 4 жыл бұрын

Excellent grouping !👍 Hey brother about how much does it cost to build a P80 not including the red dot, just a basic one, nothing fancy ? Ballpark for the kit and all the parts ?

@AlphaRomeoOneFive 4 жыл бұрын

For the basics I pieced it together over a couple months catching sales and I was in it for right around $550 I believe including a handful of mags. So basically the same price as a new Glock. Benefits of a P80 of course is no serial number plus it's something you kind of get to make on your own 😁

@Jerry-Parker 4 жыл бұрын

@@AlphaRomeoOneFive Thanks man 👍 I've been thinking about building one.

@AlphaRomeoOneFive 4 жыл бұрын

@@Jerry-Parker You got it 👍 and for what it's worth, I say go for it!

@diegoglenn1483 Жыл бұрын

any holsters you know can fit with comp? i run gen3 g19 aswell

@AlphaRomeoOneFive Жыл бұрын

Nothing that's made specifically for this comp off the top of my head. I'd go with an open bottomed G17 holster or maybe even a G34 holster and that should work out for getting more of the comp covered. I'd reach out to your favorite holster company and tell them what you're running and ask them what would work best. I'm a big fan of Vedder Holsters personally

@theguardian231823910 3 ай бұрын

I have the g19 gen4 with this comp it fits well in my serpa holster

@2tres12 4 жыл бұрын

So how do you do clean it? If you put blue thread locker?. No barrel take down?. I would assume using a system like the otis? Or how do you clean it?

@AlphaRomeoOneFive 4 жыл бұрын

I didn't use the thread locker on mine but would if it was permanently attached. I dont think there would be anyway of removing it without breaking the thread locker. I suppose you could just lock the slide to the rear and clean the inside of the barrel doing it that way. Definitely wouldn't be my preferred method of cleaning though. Great comment, I hadn't though of that 👍

@2tres12 4 жыл бұрын

AlphaRomeo-OneFive Thanks for the reply. I tried watching many videos. All mention installation. None, take off. Nor cleaning. Most use the blue. Saw a video from (ammo x aloha) . He broke a mass driver from a bullet. So I’m concerned. About running it without the blue. Gave me something to think about.

@AlphaRomeoOneFive 4 жыл бұрын

@@2tres12 You got it brother 👍 when I run it I just tighten it down good then check it every 50-100 rounds or so to make sure it's still tight.

@lazarus1867 3 жыл бұрын

I wonder if this would work on the arex delta gen 2..

@AlphaRomeoOneFive 3 жыл бұрын

I haven't a clue. You could try contacting SI and asking, they're great about getting back to you quick

@rickhayes 2 жыл бұрын

Quick question, did it ding the end of your slide? I have a Zaffirri Precision slide and barrel on my P80 and just hand racking the slide it started to wear the black off the nose of my slide. Nope!! Took it off without even firing it. Thanks for posting.

@AlphaRomeoOneFive 2 жыл бұрын

Dang that's no bueno at all. These slides aren't cheap for sure. I know they're tools in the long run but I'm like you and want to keep mine looking good too. I've not had issues with the comp rubbing my slide. Sucks that it happened to you

@rickhayes 2 жыл бұрын

@@AlphaRomeoOneFive .....thanks for the reply and info. I have reached out to SI with a customer support request and sent them pics of my slide and their comp showing the contact points. Hopefully they have dealt with this before and can give me some guidance. Really like the comp and want to use it but not at the expense of beating up a 400 dollar slide!! 😳😳

@AlphaRomeoOneFive 2 жыл бұрын

@@rickhayes yeah no comp is worth scratching up a slide at that cost. I've contacted SI's customer service a few times over the years and they've been absolutely wonderful, hopefully they get you squared away quickly

@Tarumarugan 3 жыл бұрын

Is that bandage from putting the spring on?

@AlphaRomeoOneFive 3 жыл бұрын

Nah it's not that bad lol. I install flooring so I often times have little cuts and nicks on my hands

@Kingx.V 4 жыл бұрын

I kept getting feed issues every 6-8 rounds and after that I removed and installed original glock spring and guide rod and had no issues I put the comp back on and I would have a feed issue or a stove pipe malfunction

@AlphaRomeoOneFive 4 жыл бұрын

That's weird, I've not heard of that issue with the comp on before. I'd contact Strike industries and ask them about it

@lilmanop 3 жыл бұрын

You installed it incorrectly

@Semiautoautomatic_shaman 3 жыл бұрын

Rezero it please, I want to know if the Comp threw your shot off. And if it can be corrected by simply re zeroing. (Considering buying one) thanks mate.

@captainohsowavy 3 жыл бұрын

Exactly lol have a red dot on it and didnt sight it in with the attachment

@AlphaRomeoOneFive 3 жыл бұрын

Killa Kale, Why change the zero on the red dot if it's not something I'm planning on running full time and using as a range toy? This is a gun I carry quite a bit and definitely not with the comp on. The Connoisseur, I'm sure that if you zeroed it with your red dot and irons it would hold just fine. Every time I've put it back on my poi has been the same at just high and right

@Semiautoautomatic_shaman 3 жыл бұрын

AlphaRomeo-OneFive thanks, that’s a good note. I’ll let you know if it holds poi for me. If you do happen to zero it with the comp let me know. Keep making videos 👍🏼👍🏼

@AlphaRomeoOneFive 3 жыл бұрын

@@Semiautoautomatic_shaman Thanks brother I appreciate it. Definitely keep me posted on your reesults as well!

@westcoast7703 3 жыл бұрын

Killa kale Yeah why zero it when its not going to be convenient ;95 him? What do you think this is? Some youtube channel that supposedly wants to please viewers? Take a hike pal

@Fred_NaughT 4 жыл бұрын

Boom !!!

@AlphaRomeoOneFive 4 жыл бұрын

Bam! Quick on the draw brother!

@Tsquare28 3 жыл бұрын

Did you get any malfunctions using 115gr ammo

@AlphaRomeoOneFive 3 жыл бұрын

I've not had any malfunctions using 115gr or 124gr. Haven't tried anything other than those two though

@glenquagmire7724 6 ай бұрын

What brand slide is that?

@AlphaRomeoOneFive 6 ай бұрын

The company was called Thompson Leh. I believe they went out of business a couple years back though unfortunately

@aviatecha 3 жыл бұрын

Is the Glock disabled when the mass driver is pressed against something

@AlphaRomeoOneFive 3 жыл бұрын

I've never tried that and don't plan on it either lol. My guess is there's no way that it could possibly disable it

@Rob_Nasty 3 жыл бұрын

No, a glocks action fails IF the SLIDE is pushed back. Not the guide rod.

@derrickwashington1667 24 күн бұрын

The compensator doesn't spring forward. It remains in the same place as the slide cycles independently.

@woodyy992 2 жыл бұрын

Can I still use that muzzle with a threaded barrel?

@AlphaRomeoOneFive 2 жыл бұрын

From my understanding yes you can. You'll still have to use the guide rod the mass driver comes with as that's the only way to attach it.

@ennalenndo3356 4 жыл бұрын

The muzzle part of Glock 19 P18 is similar to Desert Eagle.🇯🇵😁👍

@AlphaRomeoOneFive 4 жыл бұрын

Yeah it's a compensator to help you shoot faster 😁🇺🇸🇯🇵

@PeaceLoveAndGuns 4 жыл бұрын

Whoa, a squared guide-rod? That's pretty cool, but that install diagram doesn't inspire confidence. I actually had a 1911 guide rod cup go flying a few years back. Hit a window and looks like I shot it. That Poly 80 with the comp looks good, man. The POI shift is interesting. I wouldn't think it would have that much effect. I want to see some high speed footage of this in action to see the unit springing forward.

@AlphaRomeoOneFive 4 жыл бұрын

Yeah the guide rod is like a rounded off rectangle that runs all the way through in order to help keep everything lined up. It's a pretty neat design. I record all of my videos on my phone so the high speed isn't high speed enough to catch it springing forward unfortunately lol. I think the strike industries video has that footage though

@michaeltorres214 2 жыл бұрын

Recommendations for holsters with this comp been looking around feels almost impossible to find without modding being done to holster Gen5 Glock 19 Light:TRL-1 Comp: mass driver (Strike Industries)

@AlphaRomeoOneFive 2 жыл бұрын

I've not looked for any compatible holsters for it unfortunately. You've got a setup though that I'm sure a lot of companies make holsters for. I would look to find one that just has a open bottom so the comp can slide straight through and I imagine you'd be ok. Or looking for a Glock 17 open ended holster so the comp would be protected by the kydex by another 1/2" or so

@iqis5962 2 жыл бұрын

Try T Rex Arms

@beserkerpatroit1337 3 жыл бұрын

I wish they made one of these that fit a G34 just so I could build a badass robocop glock

@AlphaRomeoOneFive 3 жыл бұрын

That would definitely be sweet!

@christianaguilar5486 3 жыл бұрын

Can’t you just put a G17 comp on the 34 ?

@AlphaRomeoOneFive 3 жыл бұрын

Idk 🤔

@J.Wick. Жыл бұрын

@@christianaguilar5486 seems like it would work. I'm curious about the 34 too.

@shawnbalch6046 3 жыл бұрын

Your trigger press and grip may have a little to do with your POA/POI. Try to get in the habit of releasing the trigger to the reset. When you let the trigger go all the way forward it allows for more deflection of your dot. Still pretty good shots though.

@AlphaRomeoOneFive 3 жыл бұрын

I've had several similar comments. I actually shoot to reset, I don't know if it's the camera angles I use or what but it doesn't look like I do. Thanks though, I always appreciate any and all advice I get to get better!

@StrictlyPlinking 4 жыл бұрын

Overall, appears to be a success. Update us on your long term thoughts on this accessory. May look into it for my 17.

@AlphaRomeoOneFive 4 жыл бұрын

I think it's great and definitely does what it's supposed to. I made this video 4 months ago so I've had more time with it since then. My thoughts are it's great if you're putting it on something and keeping it on full time, that could be a range toy, edc gun or competition gun. You'll have to adjust your sights to account for the poi change. Since I'm still carrying this gun part time and don't have a holster that'll fit it without modifying one I just leave it off. I'll occasionally throw it on at the farm to plink with and have fun, but I don't bother adjusting the RMR instead I adjust my point of aim for it

@StrictlyPlinking 4 жыл бұрын

AlphaRomeo-OneFive Wtf! Lol 😂 Four months old already?!

@AlphaRomeoOneFive 4 жыл бұрын

@@StrictlyPlinking I actually have videos that are older that I still haven't released yet 😂 I make the videos and then release them when I feel like the time is right lol. I like to have videos stocked up so I'll always have some content to release if I'm unable to film for whatever reason. I've been consistent in my 3 videos a week goal, with one being my Sunday Thoughts. I'm not going to lie though, I've been getting pretty discouraged lately. I feel like for as hard as I work at it I should have more subs, and I know KZfaq has been throttling my content. People are being unsubscribed from my channel by KZfaq and the majority of the time I don't get notifications for the comments people are leaving on my videos. I lost 3 subscribers yesterday throughout the day which is a lot for a channel as small as mine, and I know it was KZfaq since I hadn't posted anything since Tuesday 😕

@StrictlyPlinking 4 жыл бұрын

AlphaRomeo-OneFive I hear ya on the bs from KZfaq. Or maybe my content ain’t cutting it! Lol! It’s ok and that’s why I’m done with GAWs; 43 more subs and I’ll wrap things up and no more! And again, it really is just more of a hobby channel for me. I miss Budget Gun Cinema; his trail got cold and just stopped. 😕

@AlphaRomeoOneFive 4 жыл бұрын

@@StrictlyPlinking Yeah I miss him too. Haven't seen him around in a while. I'll have to swing bybhisbchannel and make sure all is good. I haven't seen Tomon8tor around lately either 😕 I'll have to shoot him a text tomorrow and see how he's doing

@omarnunez53 3 жыл бұрын

Do you know if this works on the glock 23 ?

@AlphaRomeoOneFive 3 жыл бұрын

My guess is it's probably not machined big enough to fit a .40 pill down it. I'd contact Strike Industries and check with them though

@omarnunez53 3 жыл бұрын

@@AlphaRomeoOneFive thanks man

@thooleiboy9518 3 жыл бұрын

can u install on g19 gen 5?

@AlphaRomeoOneFive 3 жыл бұрын

I don't believe so. I think they're making one that'll be compatible for the gen 5. SI is based out of Cali and they don't have gen 4's or 5's on their unconstitutional hand gun roster so they usually come out with gen 3 first.

@nelsonmann9838 3 жыл бұрын

Can this work with a Taurus g3?

@AlphaRomeoOneFive 3 жыл бұрын

My guess would be no as it's specifically designed for Glocks. You could try contacting Strike Industries though, their customer service is great

@yomikey762 Жыл бұрын

Why is the compact upside down???

@AlphaRomeoOneFive Жыл бұрын

Not sure what you mean?

@neoxyooj 2 жыл бұрын

I have the same comp on my p80 and had issues with firing, in particular, failure to feed. I took it off and ran with factory g17 guide rods and spring and had no failures to feed. Cool factor, yes! But functionality, no. I recommend passing on this.

@AlphaRomeoOneFive 2 жыл бұрын

Are you sure you had it installed correctly? The only time I've ever heard of it causing malfunctions were with it installed incorrectly, not saying that's impossible though. Failures to feed would be really weird. Did you have the guide rod fitment washer installed? That's the only thing I can think of off the top of my head that would possibly cause the slide not to move as intended to help feed that next round

@neoxyooj 2 жыл бұрын

@@AlphaRomeoOneFive yea could be. But I know that yhe factory guide and spring worked just fine so I'm running the p80 without it. Thanks for the insight.

@AlphaRomeoOneFive 2 жыл бұрын

@@neoxyooj 👍 you got it. Good luck with it, hopefully you can get it to work correctly

@cjceredon1 5 ай бұрын

If FTF, you're going to need to change the recoil spring... I believe 11 or 13lbs

@neoxyooj 5 ай бұрын

@cjceredon1 2 years later... I'll look into this lol!

@ghostrider302000 3 жыл бұрын

Are you using gen 3 internals ?

@AlphaRomeoOneFive 3 жыл бұрын

Yeah kinda, most are oem gen 3 internals other than the trigger, minus connector and safety plunger which are all Overwatch Precision. Apex extractor, and glock gen 4 ejector

@ghostrider302000 3 жыл бұрын

Thank you for the information

@SeeJojoSenpai 3 жыл бұрын

Hi 👋😊 where can I get those cool slide build you have boss?✌️

@AlphaRomeoOneFive 3 жыл бұрын

I got the slide several years ago, Idk if they're still making them actually. The company name is Thompson Leh, I had found this one on eBay. It's been a great slide for the money

@rxdoom1194 4 жыл бұрын

I got one the other day, it’s cool as hell but definitely not practical for me :/ really hate it doesn’t fit my TXC holster so I’ll probably just keep it as a range toy at least until I get a 43x to replace my current edc lol

@AlphaRomeoOneFive 4 жыл бұрын

Yeah I'm in the same boat brother. Just a fun range toy for now, but it does work well.

@PatRMG 4 жыл бұрын

Contents under pressure, be aware that it's compensating for something.

@AlphaRomeoOneFive 4 жыл бұрын

It sure enough is! Maybe it's compensating for not being a 10mm 🤔 that video was great!

@PatRMG 4 жыл бұрын

@@AlphaRomeoOneFive Should have some more 10mm goodness coming out soon.

@AlphaRomeoOneFive 4 жыл бұрын

@@PatRMG That's what I'm talking about!

@stockmanbryce1 4 жыл бұрын

will the gen 4 comp work on the gen 5 (g17)

@AlphaRomeoOneFive 4 жыл бұрын

Not a clue. Contact SI and ask them. I had to check with them before I bought this to make sure it would work with the P80, their customer swrvice is great 👍

@stockmanbryce1 4 жыл бұрын

AlphaRomeo-OneFive thank you I will contact them

@knightnight0237 4 жыл бұрын

Ever find out in gen 5’s?

@stockmanbryce1 4 жыл бұрын

albert oriol I contacted their customer service (amazing people btw) and they said they had something in the works about a month ago

@AlphaRomeoOneFive 4 жыл бұрын

@@stockmanbryce1 it seems like they make gen 3 items first then move on to 4 and 5. My guess is that they do that because they're based out of Cali and gen 3's are still available for their completely stupid and unconstitutional gun roster

@dangerdoberman Жыл бұрын

How's it holding up?

@AlphaRomeoOneFive Жыл бұрын

I don't run it full time. I just throw it on for having fun while plinking now and then. It's been great though

@cobraninja2968 2 жыл бұрын

I’m thinking of getting one for my 17

@AlphaRomeoOneFive 2 жыл бұрын

It's fun to have on there for sure

@DEATH_TO_TYRANTS 4 жыл бұрын

Stay safe amigo

@AlphaRomeoOneFive 4 жыл бұрын

Thanks brochacho, you as well!

@FoolisH409 2 жыл бұрын

Wish they made one for the Glock 41

@kunleadunbi3686 2 жыл бұрын

Any holster options that you know of?

@AlphaRomeoOneFive 2 жыл бұрын

I don't know of any specifically made for the addition of the comp. My recommendation would be to look for an open ended holster and the comp should slide right through. If you're running it on a P80 G19 build maybe look for a P80 G17 holster so that kydex would run down a little further and cover more of the comp

@papupops2196 4 жыл бұрын

I didn't notice, did you have those band aids on before or after you installed it?🤕🤣 Still a good review.

@AlphaRomeoOneFive 4 жыл бұрын

Definitely before 😂 I try and get in too much of a hurry when working with Rick sometimes!

@lilmanop 3 жыл бұрын

Of course any time you put new weight or items on a gun or barrel and ect.. you should always rezero your gun

@AlphaRomeoOneFive 3 жыл бұрын

When I got it I didn't figure it would since it wasn't attached to the barrel at all. Live and learn I suppose

@ThatMans-anAnimal 3 жыл бұрын

Did it damage your slide at all?

@AlphaRomeoOneFive 3 жыл бұрын

Not at all

@1911geek 3 жыл бұрын

Any time you add a muzzle device point of aim and point of impact will change no big deal sir. 4-6 clicks tontge left and you are in business or hold over like any reactive shooter. First 2-3 shots to confirm and carry on

@AlphaRomeoOneFive 3 жыл бұрын

Yeah I knew point of impact will change for muzzle devices when throwing on something new. I just didn't think it would happen on here since the comp wasn't attached to the barrel itself lol. Live and learn as they say 😁

@1911geek 3 жыл бұрын

@@AlphaRomeoOneFive on your data book log it how ever many clicks of elevations and windage adjust at 10, 15, and 25 yards shoot log and hold over either way still kill zone

@xHOLLlSTERx 3 жыл бұрын

That third hand would be called a vice.

@AlphaRomeoOneFive 3 жыл бұрын

That it would

@valqueenofValhalla 4 жыл бұрын

Oh and good luck with your accuracy make sure you know where to adjust you aim cause it will cause a shift from what your used to

@AlphaRomeoOneFive 4 жыл бұрын

Yeah I covered that in the video. This is strictly a fun range item for me

@zx9rmadman400 3 жыл бұрын

5 yards dude?! 7 yards?! u know thats a gun and not a melee weapon rite?

@AlphaRomeoOneFive 3 жыл бұрын

I do indeed 😁

@isaywoopow 3 жыл бұрын

Looks like You could beat the hell out of some 1 with it sheesh lol

@AlphaRomeoOneFive 3 жыл бұрын

That you definitely could lol

@chaoticnipples3405 3 жыл бұрын

Apparently they got a recall

@AlphaRomeoOneFive 3 жыл бұрын

I've not heard about that, I'll have to look into it. Thanks 👍

@JeepGuy3 4 жыл бұрын

SAWEET!!!!

@AlphaRomeoOneFive 4 жыл бұрын

It is rather fun to shoot with it on 😁

@JeepGuy3 4 жыл бұрын

@@AlphaRomeoOneFive lol. Brother do you ever sleep?

@AlphaRomeoOneFive 4 жыл бұрын

@@JeepGuy3 getting ready to head to bed now @2am lol. I'm definitely a night owl and one who hates mornings 😁

@JeepGuy3 4 жыл бұрын

@@AlphaRomeoOneFive night brother.

@nicolaswalton9453 4 жыл бұрын

putting a comp on your gun wouldnt change your point of impact. left and right variability is from trigger pull and up and down variation is generally from recoil anticipation. this is assuming your gun is sighted in accurately

@AlphaRomeoOneFive 4 жыл бұрын

The RMR is sighted in perfectly, the comp absolutley changed the point of impact. Same thing that happens when you put a new muzzle device on a AR. Your zero changes along with it.

@nicolaswalton9453 4 жыл бұрын

AlphaRomeo-OneFive Unless you have a long barrel and a heavy enough comp to affect the harmonics of the barrel and make it whip a little differently (which you would only notice at long ranges and it would be like 1-2 MOA) at 5-10 yards with a glock and a small comp. the only thing that would change would be your sight acquisition on follow up shots. Two aimed shots one with comp and without would be identical if human error wasn’t a variable

@AlphaRomeoOneFive 4 жыл бұрын

@@nicolaswalton9453 I don't know what to tell you other than it did 🤷‍♂️ I've never shot high right before, if anything I usually pull it low and left. Here's a link to the TFB video where Hop tested it out and experienced a POI shift as well kzfaq.info/get/bejne/oZiGraqdrMjHpIU.html

@warrenrosen2326 3 жыл бұрын

U tube does not allow parts installation? The first time someone gets injured because of a lack of instruction,. I hope they sue u tube up the wazoo.

@AlphaRomeoOneFive 3 жыл бұрын

Lawsuits are a big part of it I'm sure. There's still tons of installation videos up though, so I'm not sure why they say that or how they enforce it. If KZfaq were to get sued for a bad installation video you could basically kiss gun videos goodbye. It would be a worse case scenario, they already want us gone as it is

@warrenrosen2326 3 жыл бұрын

U tube is not liable for a "bad installation video.". They could well be liable for intentionally and negligently preventing access to essential safety information. Suppose they banned driving instruction information!

@WBrown-jp6sj 3 жыл бұрын

KZfaq HAS TURNED INTO BS WITH ALL OF THEIR RULES

@AlphaRomeoOneFive 3 жыл бұрын

It sure enough has. I wish there was a better plarform but as for now this is still where all the people are

@darrenflint9839 3 жыл бұрын

Must be not very good at building things if you think that was hard lol

@AlphaRomeoOneFive 3 жыл бұрын

I'm actually quite handy, thanks though

@royk164 2 жыл бұрын

What's with that annoying , too load music, really ?

@AlphaRomeoOneFive 2 жыл бұрын

Yes really, suck it up buttercup 😘

@royk164 2 жыл бұрын

@@AlphaRomeoOneFive Its still shitty music.

@AlphaRomeoOneFive 2 жыл бұрын

@@royk164 I'll make sure to tell that to my nephew who was 12 or 13 at the time when he made that beat 😁

@royk164 2 жыл бұрын

@@AlphaRomeoOneFive Last comment, I'll try to clarify this, I tuned into your review to learn about the item you were reviewing. During the time you were on the range, I had a hard time hearing YOU over the 12 year old's music , so if you feel the need to play kids music during a product review for people that might want to buy it, turn it down so we can hear you speak. Done.

@AlphaRomeoOneFive 2 жыл бұрын

@@royk164 fair enough, but people will tune out if there's not some kind of music playing during stuff like that and all you're hearing is everyone's gun shots the whole time. No one else has seemed to have an issue with the music being too loud. I'm very proud of my nephew and enjoy throwing his music in some of my video's. Sorry it ruined the video for you 🤷‍♂️ hope you have a great day and happy holidays.