Stripped Shower Handle - Delta Monitor 1700 series

Рет қаралды 122,754

5 жыл бұрын

Click to Subscribe: / @helpmeoutvideos
An investigation of a stripped handle - turns freely but the shower does not operate. Turns out the problem was partially worn plastic teeth on the faucet component - due to improperly installed handle from previous repair.

Пікірлер: 19

@berkleybrown7997 2 ай бұрын

The video gave me the right steps to solve my problem. Thanks dude

@ndgrover Жыл бұрын

I'm going to do a little more surgery because my hot/cold are reversed but this look inside the device was very helpful.

@earlschmidt7818 3 жыл бұрын

Thank you for the video as I have that exact faucet , and need to fix a leak.

@zbplumbing647 5 жыл бұрын

The o-ring goes over the bonnet nut and prevents water from goin into the wall and directs it out the front so you know that it's leaking. That's what's preventing the handle from goin all the way on.

@HelpMeOutVideos 5 жыл бұрын

Thank you for the tip! That makes complete sense. I moved the o-ring and will update my video. Question- there is a groove on the bonnet that looks like a perfect spot for the o-ring, but the sleeve won't pass over it (not enough space). So I put the o-ring just behind the groove on the bonnet, and it went on fine. What do you think?

@zbplumbing647 5 жыл бұрын

Yep that's right

@queenie713 3 жыл бұрын

You just saved my day❤️

@anniebee6215 4 жыл бұрын

Thank you so much for your helpful video!!! It saved me from having to call the plumber! You showed me how to do a simple thing that I was able to do myself.

@loridemann6699 5 жыл бұрын

Thanks so much! This was all I needed and you have a new subscriber 😉

@tonycamillo7171 2 жыл бұрын

Very helpful sir. Thank you so very much

@dianareynoldsllressentials3543 2 жыл бұрын

Any thoughts on why the temperature handle won't move- stuck on cold. Bought a house with this faucet.... just checking before I call someone. Thank you!

@hicktowncustomz 4 жыл бұрын

Very helpful! I didnt have to replace the faucet! Thanks

@brianu33 3 жыл бұрын

Our screw won’t budge. I guess it will need to be drilled out. Any thoughts?

@mitchellkarr 3 жыл бұрын

What is the cartridge component?

@emmanuel7899 3 жыл бұрын

I just install three of those and one of them the hot water is is in the cold and oposite im pretty sure I have to cut the ceiling and change the water lines

@gregorywerner289 Жыл бұрын

I have a similar handle, but the screw that gives me the problem is the one that keeps the end of the handle on. That won't stay screwed in and it is hard to rotate the handle. Don't even know what it is called or it is not one piece