Super Steering Upgrade for '87 Corolla FX16

Super Steering Upgrade for '87 Corolla FX16 - PT3

Рет қаралды 13,993

3 жыл бұрын

The AE82 Corolla gets a steering upgrade that transforms the handling of the car. The new steering rack was fully rebuilt with a new steering pinion to quicken up the steering ratio. The new rack is about 2.5 turns lock to lock while the old rack was about 3.5 turns lock to lock. New AE86 inner tie-rods and custom Techno Toy Tuning tie-rod ends were used to give a tight steering feel that is also strong. The result was amazing! Watch as I progress on my journey of making the Corolla FX16 a Touge Monster!
A big thank you to Colin for the information on the steering upgrade: @colin.pan
Thank you to Techno Toy Tuning for making me the custom outer tie-rods!
This upgrade should apply to AE92, AE101 and AE111 Corollas. By quickening the steering ratio you will increase the steering response and control through the corners. I was plagued with tie-rod ends that would get sloppy and give a vague steering feel. Now my Corolla can handle the power, braking and steering without being sloppy. This was one of the best upgrades that I have done for the Corolla. It's hard to find someone to repair these old steering racks but doing it yourself is a viable option.
Let me know what's the next thing that I should work on to make the Corolla even better.
Follow me on Instagram: @Sushpants
Things I used for the quick steering rack upgrade:
-ZZE110 Koyo steering rack
-OEM ZZE110 steering rack bushings: 45517-01041, 45516-02010
-JDM Koyo MRS steering pinion ** SEE NOTE BELOW **
-Steering rack rebuild kit (Gates 348464)
-OEM Toyota AE86 inner tie-rods
-Techno Toy Tuning Outer tie-rods
-HY-CAPACITY 8813216 adapter (put a small o-ring steering rack side and flare connection on hose side.)
-Mobil 1 ATF, used for power steering
NOTE: If you have a LHD Corolla, you will need to use a RHD MR-S steering pinion.
If you have a RHD Corolla, you will need to use a LHD MR-S steering pinion.
Koyo steering racks.
Credit to @colin.pan for the info.
Body Stiffening Braces used:
-TOYOTA COROLLA (AE82) - FENDER (3 POINTS) (COMES AS A PAIR) - UR-FD3-114
-TOYOTA COROLLA (AE82) - FRONT LOWER (4 POINTS) - UR-LA4-1191
Music By:
Wave City - Jacuzzi
City Night Lights - Bad Snacks
Bensound - Sexy
Laguna - Pocket paradise
TrueArtRealAffectionPart4 - Noir Et Blanc Vie
PLEASE NOTE: I am not a mechanic and you assume all risk by working on your own car. This is for entertainment only. Please be careful.

Пікірлер: 200

@Mugigomi 3 жыл бұрын

Still the best 4AGE build on KZfaq. Not a rocketship monster; but just a daily-driven, humble and nimble small hatchback with an engine note to die for. Really hope more would notice you!

@eliabtorres1548 3 жыл бұрын

5:00 it’s always really exciting when you’re been working on your car till it’s dark, then finally going for a test drive

@sushpants 3 жыл бұрын

I just had to take it out.

@miralemnermina142 3 жыл бұрын

You definitely need a lightened flywheel, once you get used to it it's an awesome addition

@sushpants 3 жыл бұрын

The 4age blacktop comes with a pretty light flywheel, 5.5kg. I think any lighter and it would be hard to drive on the street.

@Riley_Ray 3 жыл бұрын

I felt like Michael Scott watching this video trying not to say “that’s what she said” 😂😂😂

@FiendTheKing 3 жыл бұрын

My favorite car on youtube - also the best sounding. For total balance tuning, maybe brakes next?

@boostedfella7772 3 жыл бұрын

Maybe some retro racing seats, that would be cool. And maybe brakes. Can't wait to watch the development of this Corolla till you're already rebuilding the engine

@sushpants 3 жыл бұрын

I've been looking at some retro Recaro's! Brakes are looking like the next weak point.

@boostedfella7772 3 жыл бұрын

@@sushpants thats awesome!

@supremeclienteleautocare 3 жыл бұрын

Great work Alex, you’re paving the way for new aftermarket parts hopefully to be put in mass production for us AE82 guys

@sushpants 3 жыл бұрын

I hope! AE82's don't get the love that they deserve.

@Yuki_404 3 жыл бұрын

The response you get out of that Corolla after the upgrade is amazing! Looks so good.

@sushpants 3 жыл бұрын

It brought a tear to my eye, it was that good!

@mrentername8854 3 жыл бұрын

Before i didn't really know to much about any of the other corollas besides the ae86 for obvious reasons, and i just thought once they went FWD I thought they just got boring, but every video i watch of this car makes me wanna get one more and more. love the videos mate thank you for blessing us with this nugget!!!!

@ericbritton8146 Жыл бұрын

Wow! You hit 8,500 rpm. This is remarkable. I had this exact same car with the stock engine that red lined at 7,500 rpm and I was impressed with that.

@MRSTYFFakaLloydDStiff1 3 жыл бұрын

Sweet I'm looking for a AE82 myself. Watching ur video really have me missing my Corolla

@RetroMotiveAdventures Жыл бұрын

I did the T3 rack on my MR2 SC recently and it absolutely changed the entire way it handles I love it.

@hogdog567 3 жыл бұрын

Love the car and the format, getting to see mods finished, set up and tested is definitely worth waiting for.

@Naneychevelu 3 жыл бұрын

Gotta love the time and effort you put into your channel

@sushpants 3 жыл бұрын

Thanks Naney, average about 400gigs of footage for each of these. #OneManDreamTeam

@Naneychevelu 3 жыл бұрын

@@sushpants jeesus CHROisT :') Well i'm a cartoonist, so i kinda know how big video files get but still wow. Thank you for all your commitment !

@DaMan8691 3 жыл бұрын

Damn, awesome video as always man! I NEED those T3 outer tie rods, wow

@sushpants 3 жыл бұрын

T3 is working on making them available on their store soon!

@danielc.7173 3 жыл бұрын

I own a 95' Geo Prism, (same exact car as the toyota corolla of the same year) and I'm swapping a 4AGE 20v silvertop into it, I cant wait to start meeting up with other Toyota enthusiasts!

@danielc.7173 3 жыл бұрын

Your build has been such an inspiration for my build. Practical, fun, reliable, sturdy. Thsts what I want to do with my Corolla

@zerohikari2685 3 жыл бұрын

Hey Sush, keep up the good work. I highly recommend doing cams next. A nice set of Cams from Tomei, TecArts, or Kelford will net you 20+ HP easy. However you will also need to upgrade your valve springs. Good luck with whatever you do next.

@sushpants 3 жыл бұрын

Cams are so appealing. That bump in power would be awesome and it should make the car sound even meaner! Thanks for the comment.

@redyr6 3 жыл бұрын

Finally, was excited for this video!

@Kassu1 3 жыл бұрын

I just love the sound!

@slowvag8v 3 жыл бұрын

it sounds so good

@richardallen5488 3 жыл бұрын

The car sounds amazing !

@totalmadnesman 3 жыл бұрын

Ah maestro back at it again!

@tjcben1 3 жыл бұрын

Love the upgrades. And the car looks and drives great👍

@350TPI 3 жыл бұрын

I ALMOST bought one of these 2 days ago but it was the base fx16 that someone had put GT-S parts on. It was a beauty but it wasn't cheap and i was afraid when i got ready to sell no one would want what was basically a GT-S clone minus the body kit and roof spoiler. I immediately regretted passing on it and pissing the owner off. Beautiful car btw.

@sushpants 3 жыл бұрын

Thanks! The GT-S parts are in pretty high demand right now. Also, good condition FX16's are also in slim supply.

@macp91 3 жыл бұрын

Dude love the content you have a new subscriber!! Keep the videos coming. 📹

@ZeShirky 3 жыл бұрын

😳 When Sushpants posts a new video 😳

@tassoss13 3 жыл бұрын

Just amazing

@CMAutohaus 3 жыл бұрын

Great video as always! So good to see you have a great relationship with your alignment guy.

@mikemikeyee 3 жыл бұрын

Good relationships with your alignment guy iss kkeeeeyyyyy

@lordblizzord 3 жыл бұрын

One of my favorite car channels!!!! Can’t wait to see what you do next. Gets me excited about my car

@UndisputedFrost 3 жыл бұрын

God I miss my Corolla fx16!!!! Need to find another!! Keep up the great channel

@patricklawrence9784 3 жыл бұрын

This like watching an action packed film.. Sweet!

@sushpants 3 жыл бұрын

I try to keep it entertaining. Thanks for the comment Patrick!

@user-ur8jy8ir7z Жыл бұрын

My first car! Is beautiful！

@oreboxo 3 жыл бұрын

The upgrade seemed to work out beautifly! That's a nice ride right there! :)

@sushpants 3 жыл бұрын

I'm very pleased with the results :D Thanks for the comment!

@willmoua1 3 жыл бұрын

Amazing sush!

@sushpants 3 жыл бұрын

Thanks!

@chadstrats 3 жыл бұрын

ear to ear grin during the driving segment

@sushpants 3 жыл бұрын

I know I was grinning!

@crx51 3 жыл бұрын

Absolutely love your car. I have a Honda CR-X EF8 but can appreciate what is a very similar car from Toyota. Sounds great and looks like awesome fun.

@bryan10444 3 жыл бұрын

You are putting out great content man! I’m gonna be using these videos to upgrade my rack now that I know a Spyder pinion works on my ae101 my goals for my car are similar to yours so it makes following your build very helpful

@sushpants 3 жыл бұрын

Thanks Bryan. The thing i've been told to keep an eye out for is if you have a LHD rack, you need a RHD steering pinion. If it's a RHD rack, you need a LHD pinion. Good luck and thanks for the comment!

@zeroswings2 3 жыл бұрын

that... was awesome

@jjrosaria 3 жыл бұрын

I’m so happy I’m so happy I’m so happy man! I’ve been waiting to hear your Corolla and all it’s glory again. I was smiling the whole video and so excited for your car. Steering must feel so amazing now! Maybe for future mods some nice recaros? Although the stock Corolla seats are also great!

@sushpants 3 жыл бұрын

I do love the factory seats but something that holds me in better would be nice! The Corolla spent most of 2020 sitting while I was working on all the upgrades. 2021 will be a driving year!

@javinhunt1199 3 жыл бұрын

Love the jetskis in the driveway. I just sold my 2 sxi750s.

@dawidkowalski5854 3 жыл бұрын

I found Your channel Yesterday, great car, great job. I love Japanese cars like a Corolla, Civic, Swift. Good luck with Your car and upgrade him. Greatings from Poland.

@sushpants 3 жыл бұрын

Thanks Dawid!

@blakslayer 3 жыл бұрын

Theses are pretty nice upgrade !! I thing now it's time for a Brake upgrade if you want to propely attack a downhill !

3 жыл бұрын

Your AE82 is awesome!

@sushpants 3 жыл бұрын

Thanks Lucas!

3 жыл бұрын

@@sushpants You're welcome. What other mods are you going to install on your AE82?

@sushpants 3 жыл бұрын

An lsd is on my wish list along with cams and head work. But the AE82 is heading to the track soon to see how the current package performs.

3 жыл бұрын

@@sushpants Okay. Good luck.

@rp502 2 жыл бұрын

Thank you for sharing how to upgrade your Corolla... Mine is ae80

@H0tDawgWater911 3 жыл бұрын

Bro sick corolla, hope to see it at a first friday one day!

@sushpants 3 жыл бұрын

I was supposed to be at the last one but I finished this project that night :D I'll be at the next one. Come say hi if you see me!

@oscarzt1652 3 жыл бұрын

4:30 broooo those brake discs

@sushpants 3 жыл бұрын

You can call me ruuuuuusty :D

@hugofernandes7947 3 жыл бұрын

I honestly like so much how that car is, if it were me i would just keep it in tip top condition

@mighailjuries309 3 жыл бұрын

Awesome video. Would love those tie rod ends to be available for AE82.

@sushpants 3 жыл бұрын

I think they should be available soon! Thanks for the comment!

@bobawatsit 2 жыл бұрын

best up grade is cylinder head work, I have done heaps, unfortunately there is a lot of maths and skill involved ....but you could spend time matching every flange on the IN side, so that the ports have NO mismatch from head to trumpet get a shop to give the IN seats a 3 or 5 angle seat job, if you keen, you can use a small flapper wheel of about 120 grit to smooth out any bad looking defects, but do not take too much material out ! making the ports bigger without doing the maths can be detrimental to HP The biggest hiccup in posts is usually a little bit down from the seats, where the port meets and more often than not leaves quite a sharp edge, put a 2 > 3 mm radius here, with out taking material from the port changing cams will just move the power curve up or down the rev range

@sushpants 2 жыл бұрын

That’s for the tip, Rob!

@tuul100 2 жыл бұрын

You can absolutely see how good the car handles now compared to older videos, just looking from outside. I have this weird thing, i watch how cars take the corners and i can say if something is wrong or needs to be better, its just wierd to notice the motions that cars make.

@NLuKa420 3 жыл бұрын

You answered an age old question I had. Economy cars from the late 80s and early 90s are always criticized for the lazy and mushy steering feel. A full rotation shorter is amazing.

@sushpants 3 жыл бұрын

It's pretty wild how a quick steering ratio can change the feel of the car.

@TheNicoxoxD 3 жыл бұрын

Light flywheel!

@sushpants 3 жыл бұрын

The 4AGE blacktop already comes with a pretty light flywheel. It's 5.5kg I believe and any lighter would be hard to drive on the street.

@essb00 3 жыл бұрын

LSD should be next!

@antothemanto77 Жыл бұрын

I think weight reduction and chassis reinforcement would improve the feeling of the car and it wouldn't be too expensive. Something like a half cage and a strut brace, removing the back seats, removing sound deadening, getting nice racing seats for the front, lighter exhaust system if you haven't done so already

@mariosnikolaou5212 3 жыл бұрын

Niceee

@MarvinConnell 3 жыл бұрын

What about a lightened crank, ported & polished head & maybe a custom cold air intake(which I can suggest a new strategy at doing)? O.O (as well as a list of all of your current mods, so I don't make an arse of myself by repeating things already done... o.O ---> You can save the list as a note & copy\paste it whenever you request mod suggestions in a video... =P)

@bigtravis2004 3 жыл бұрын

Your car is awesome. Best sounding NA 4 cylinder on KZfaq. I vote brakes next or a seat upgrade to hold you in place better.

@bigtravis2004 3 жыл бұрын

Or like someone else suggested, a lightweight flywheel.

@stephanegalletdesaintaurin6950 3 жыл бұрын

Awesome upgrade ! That is exactly what I need to end up with my 4.1 turns manual steering in my french west indies rally car ! Now I will manage to get all these things ! Thanks for the video, I guess the T3 outer tie-rod is not available yet ?

@rpsmee 3 жыл бұрын

Alright... I'm gonna have to do this rack swap. The T3 tie rod ends are super boss too. I just did coilover threads sitting on the OEM perch with 250# springs this weekend. I feel that "magic" you speak of. Adding more spring to the front end gives it like 15 more horsepower because it can put it down on the ground better out of a corner. Still waiting to see if my body can take the punishment of 250F/350R springs at rallycross :)

@sushpants 3 жыл бұрын

The T3 tie rod ends really are the bees knees, especially compared to the regular end. I think the body will be fine as long as you stay off the bump stops.

@rpsmee 3 жыл бұрын

@@sushpants I said MY body. The #rxfx can take it... My spine is another story :)

@MrSupersayan22 2 жыл бұрын

Pop up lights = Tougue monster

@boostkash2640 3 жыл бұрын

Nice info. I had two of those cars the brakes did not inspire confidence and an lsd would definitely improve the ride.

@sushpants 3 жыл бұрын

Hawk HPS pads helped a lot but they are looking like the next weak point.

@danvorobiov 3 жыл бұрын

Original steering wheel is more rigid and better then any aftermarket.

@sushpants 3 жыл бұрын

They both feel pretty sturdy, but there's a big weight difference. Thanks for the comment!

@danvorobiov 3 жыл бұрын

@@sushpants With 4-point seat belts it is not so important, because the weight of your body is supported by the belts. But with OEM seat belts some times you need support from the steering wheel for your left hand, because right hand is changing gears and both feets are busy with all three pedals at the same time.

@kylex71 3 жыл бұрын

Man, I need to find one of these racks for my AW11... hairpins with 3.5 turns lock-to-lock isn't fun! All I have to do now is address the million other more pressing issues on it...

@sushpants 3 жыл бұрын

The AE82 felt a little like a bus at the tight autocross turns. Doing the bus driver shuffle :D I also have a long running list of to-do items... thanks for the comment!

@minimeeVs Жыл бұрын

The Best tire for your buget

@DwightJavierRodriguez 3 жыл бұрын

Now I need to look if they have it for my corolla (8th gen )

@sushpants 3 жыл бұрын

I think as long as your rack is a Koyo unit it should work. If you check on my part 1 from this series, I pulled the rack from a ZZE110.

@mohamedkader3460 3 жыл бұрын

Finding all the parts i need...thank you so much! Would anyone tell me the negatives of building a twin carb 4age? I really love the way my 2e responds and screams to the high 7000s. Thanks.😁

@skanisulbd 3 жыл бұрын

Install under body aluminium (0.8mm) engine cover for more arrow...

@jessetoptechallen1461 3 жыл бұрын

Nic car

@That_fella_named_J 3 жыл бұрын

A half cage would make a nice addition to the handling of the ae82. It would add to it’s rigidity

@sushpants 3 жыл бұрын

I've thought about a cage but then that would push the car more towards being a race car rather than a street/touge car. Rigidity would be nice.

@Thatotherschmuck 3 жыл бұрын

so you want some ideas for your touge car, here's one 7age build N/A, big brake kit or more aggressive braking parts, stainless steel brake lines, short shifter, or even go full polyurethane but no matter where u take the car ill keep on watching.

@sushpants 3 жыл бұрын

More torque would be nice. I'll admit that all those items are on my dream list :D Thanks for the comment!

@Thatotherschmuck 3 жыл бұрын

@@sushpants no problem fellow sir

@denikec 3 жыл бұрын

I kinda miss the OEM steering wheel, but the new one looks so nice

@sushpants 3 жыл бұрын

I'm definitely keeping the OEM wheel. The new one very pleasant to hold.

@denikec 3 жыл бұрын

@@sushpants Glad to hear! Keep up the videos and take care!

@jgreenjeans Жыл бұрын

I haven't watched all of your videos yet, but have you put in new seats? They make such a big difference.

@sushpants Жыл бұрын

I’m rocking stock seats. I had them reupholstered so they’re great to sit in. I am exploring dropping in a racing seat as the car has become too fast to keep me in place.

@jgreenjeans Жыл бұрын

@@sushpants I'm just watching you on CM Autohouse describing what you did with the OE seats and realized how awesome they are as is (height, lumbar, side bolster adjustment, and you had them reupholstered?!) I thought I'd better stop that video, find my comment and update my response only to find you'd just replied! How crazy?

@catfish_lude 3 жыл бұрын

Those disks looking kinda KiNda need of some wilwoods ngl FREEEE STICKERSSSSSS? btw best car content very crisp

@sushpants 3 жыл бұрын

Those rotors rusted up good :) Wilwoods would be sweeeeet! Thanks for the comment!

@ethanrainsford4251 3 жыл бұрын

I really want to do something like this with my del sol and keep powersteering especially for when i go k swap

@sushpants 3 жыл бұрын

Those k swaps make for some fast cars!

@ethanrainsford4251 3 жыл бұрын

@@sushpants plans are to keep it all motor but 200whp and 250nm should be plenty for a car that weighs just over 1000kg

@mikemikeyee 3 жыл бұрын

We need more Leo

@sushpants 3 жыл бұрын

Leo's going to need his own fan club.

@user-py5uo6mx5l 3 жыл бұрын

Это очень круто!

@myndwalker2799 3 жыл бұрын

Hey sushpants, do you have a full parts list of all the new remanufactured parts I can get for this car? I have the exact same 1987 Toyota Corolla FX-16 GTS and I really want to save it and bring it back to its former glory. It's got a bucket list of issues, but I live in the south so there are no critical issues like rust, and I haven't found any frame damage. If I have to go through all your videos to find out that's fine, but I thought that you might have a list. Thanks, and I hope to see more videos on this car!

@supra1722 3 жыл бұрын

I'm really curious to know if a similar steering ratio upgrade can be done on the AW11 manual racks with AE101 and ZZW30 parts.

@gabrielladavidson2938 3 жыл бұрын

Are TTT going to keep producing those tie-rod ends?

@ramonfavia2412 3 жыл бұрын

Hey sushpants I love your videos but I was wondering where you got your engine from? I also have a 87 fx16 with the 16v but I want to do a engine swap to the 20v but can’t find any. Any suggestions? Thanks! And keep up the Toyota content!

@johnboy384 3 жыл бұрын

Hey SP, what were the solid metal bushings you used on the cross member off of? What year and model? Celica wasn't it? Cheers.

@RuiGTi 3 жыл бұрын

Techno Toy Tuning should sell the custom outer tie-rods for the ae92 and ae82

@thomaselli01 3 жыл бұрын

Brilliant project! Carbon fibre hood? Lithium battery? Weight saving at the front?

@sushpants 3 жыл бұрын

I think about a carbon fiber hood every time I pop my hood. There's so much weight to save! I would need to have custom one made.

@calebharry 10 ай бұрын

Did you have any issues with the length of your steering column/rack mating surface etc? I used the fast rack from a AE111 BZR (2.6t) and swapped it into my AE92 FXGT. Let's just say it wasn't a direct fit, it fits, but not perfectly, my steering column needs to be longer and I'm not sure if it's my U-joints but, it definitely feels notchy

@SephV92 3 жыл бұрын

Are you using original blacktop axle? It should be 3 piece. Btw im thinking if i can also do this in my ae92. Nice vid bro!!

@DimZin 2 жыл бұрын

Is the mrs pinion a direct fit for the e101 steering rack?

@kimsongng1763 3 жыл бұрын

You can port and polish cylinder head

@SpacedOdyssey 2 жыл бұрын

I just got hold of a PS Rack from an AE92 Levin GT-Z, 2.5 turns lock to lock. It will be going on to my1991 AE92 Corolla Gti 16v (UK) The original PS Rack was around 3.7 turns L2 L, so it should improve the steering feel . I also have fitted Eibach progressive spring kit, so it will be interesting to see how it all works out. I have to say that fitting Poly bushes was the worst thing that I ever did to my corolla imo, they totally destroyed the ride quality

@haroonrasheedvirk141 2 жыл бұрын

From where you got the AE92 Levin GT-Z PS rack?

@haroonrasheedvirk141 2 жыл бұрын

Is AE92 Levin GT-Z really have a 2.5 turns lock to lock?

@mytipsy86 2 жыл бұрын

Just an update for anyone that goes to Steve's shop. He has really fallen off and damaged my brz's coilovers. I went to get my alignment checked which was only slightly off and left with deep groves and scratches in the top hats. Just ridiculous stuff. I was standing right in front as he was doing the aligment and whenever he was confused never asked me anything. Dont take a car you car about there.

@Bakaroons 2 жыл бұрын

Hey Sush you wouldn't have the part no. for those axels on hand?

@superkonek7808 2 жыл бұрын

any significant differences on handling after installing the fender bars?

@Ride2Xplore 3 жыл бұрын

Awesome!!!Maybe shorter gear ratios?

@sushpants 3 жыл бұрын

The gearing is already pretty short. It has a 6 speed C160 trans right now.

@Ride2Xplore 3 жыл бұрын

@@sushpants oh missed that part.

@carl8568 3 жыл бұрын

Hi Leo 👋 Fidanza flywheel pls.

@MohdFaizal-ne7mt 3 жыл бұрын

I install trumpet to my 4age blacktop, dangerous or not drive at rain, and how to protect trumpet form water

@IShallNotFall 3 жыл бұрын

I wonder if those t3 bits would work on an AE101

@sushpants 3 жыл бұрын

I think they should so long as you have a Koyo rack. The current rack is out of ZZE110 (check out part 1 from the series)

@3khor 3 жыл бұрын

What exhaust/muffler are you using?

@AE8TY2 3 жыл бұрын

Where do you source your pinion gear from a rhd mr-s? I'm definitely am looking for one.

@sushpants 3 жыл бұрын

I picked it up from Japan Yahoo Auctions.

@haroonrasheedvirk141 2 жыл бұрын

MR-S in Japan is the same as MR2 Spyder in US? It's the 3rd generation, W30?

@imachamp68 3 жыл бұрын

I dont have IG. Where can I buy a couple stickers? An AE82 is my dream car for a daily driver but they’re becoming so hard to find.

@jacksonbermingham2168 3 жыл бұрын

i think my time for some brides

@jacksonbermingham2168 3 жыл бұрын

or shorter diff ratio

@sushpants 3 жыл бұрын

Brides or Recaros would be sweet.