SolidWorks Tutorial
Рет қаралды 246,069
7 жыл бұрынsw-tc.net/#232 SolidWorks Tutorial Turbo pump, the previous made turbo was built in the car engine tutorial
►Facebook: / solidworks.tutorial.page
►Tutorials Engineer Channel: ► / @tutorialsengineer
►Engine Project :► • Project 10: V6 Engine
►For more SolidWorks Tutorials: ► • SolidWorks Practical T...
►CATIA Complete Learning:► • CATIA Complete Learni...
►Inventor Complete Learning:► • AutoDesk Inventor Comp...
►SolidWorks Surface Tutorials: ► • SolidWorks Surface Tut...
►Solidworks Sketch Tutorials: ► • SolidWorks SKETCH Tuto...
►SolidWorks Beginner Tutorials: ► • SolidWorks Complete Le...
►SolidWorks Weldment Tutorials:► • Playlist
►Available Playlists : ► / @sw-tcnet
►Learn Engineering Playlists:► / @tutorialsengineer
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
All dimensions are in mm/g/s/ISO - Based on true dimensioning.
---------------------------------------------------------------------------------------------
Rating, commenting, subscribing and sharing are always appreciated!!
----------------------------------------------------------------------------------------------
The uploading of tutorials is based on an accumulated studied plan!
----------------------------------------------------------------------------------------------
New to SolidWorks?! Recommended to watch my earlier uploads.
----------------------------------------------------------------------------------------------
I will be thankful to you for replying whom are in need.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Hello & Welcome to SolidWorks Tutorial Channel
This channel is dealing with EVERYTHING about SolidWorks aims to make the viewer a professional SolidWorks user! & to be helpful !
This Channel contains topics about:
- SolidWorks Beginners Tutorials
- SolidWorks Sketching
- SolidWorks Surface
- SolidWorks Weldments
- SolidWorks Assembly
- SolidWorks Drawing
- SolidWorks Sheet Metal
- SolidWorks Mold Design
- SolidWorks Simulation
- SolidWorks Motion
And MORE
►►►SUBSCRIBE ◄◄◄
-------------------------------------------------------------------------------------------
GO PROFIST ...BE SOLIDWORKIST ◄ suggested words!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
----------------------------------------------------------------------------------------
★------ ۞ ART ۞ ENGINEERING ۞ CREATIVITY ۞ ------★
----------------------------------------------------------------------------------------
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
OTHERS:
►MAGMA "Casting":► • 9- MAGMA 5.2 Tutorial:...
►MATLAB:► • 1- MATLAB TUTORIAL for...
►Electronics & Arduino :► / @electronics-tutorial
■Facebook 2support:► / solidworks.tutorial.page
■Google+ 2add:► plus.google.com/u/0/b/1027607...
■Donation :► www.paypal.com/cgi-bin/webscr...
@carlosmaffessoni4638 7 жыл бұрын
Amazing SW video showing interesting resources, specially "fillet". If fact, drawing curves surfaces and progressive fillet resources are always a challenge, but with perseverance anyone can do it - obviously for medium/high level SW learners. Thank you!
@mosamico 7 жыл бұрын
Best Channel for CAO ! Great work
@drewgrayson7530 6 жыл бұрын
I absolutely loved this video and I appreciate when you and people like you do video tutorials like this. I am a student at Los Molinos CA. High School and my Agriculture Teacher Ms. Steagall would love this a lot keep up the good work
@anbobo1662 5 жыл бұрын
厉害啦
@juanjoseestradacapiz2076 4 жыл бұрын
un seguidor desde mexico haces un excelente trabajo con estos tutoriales. gracias !
@amarjeetbhatia8232 4 жыл бұрын
Dear sir, Have no words for you !! Big Salute !!
@jaypanchal1997 3 жыл бұрын
Bro where is pdf of these 3d modelling??
@sabooyaa 6 жыл бұрын
Hi, Do you have a description of all of the individual parts?
@thuongtrinh1954 6 жыл бұрын
thank you so much.i tried it and i got it
@ashoksojwal4303 5 жыл бұрын
I would like to know the sources of drafting you have used to create the model.
@CADTUTORIALmax 2 жыл бұрын
wow! this tutorial video is amazing!
@joserodolfoduarte9728 6 жыл бұрын
¿Cómo le das ese efecto ultrabrillante a los modelos? Tengo solidworks 2015
@brucew8525 7 жыл бұрын
What appearance in that solid?
@omarel_debaiky8269 5 жыл бұрын
why when i try running stress analysis test the program says that there is an interference problem between the compressor cover and the compressor wheel *please help me i have a submission tmrw*
@adem503 7 жыл бұрын
hi !! good work , can you give me the definition of drawing for WHEEL Loader ?
@diegosopoderoso 7 жыл бұрын
Could you share the specification of your machine?
@akhataybeh 7 жыл бұрын
amazing
@Kilaueaorph4n Жыл бұрын
I think there was excessive use of multi radius fillet when the operation could've been done with a loft through multiple profiles. I find the use of loft feature and guiding lines provides better control of the base geometry. I normally leave fillets and multi radius fillets to round up edges, not to define the geometry of the part.
@eshraqsaffuri8771 7 жыл бұрын
great!! can u show us the materials per part? thanks
@anbobo1662 5 жыл бұрын
x学习
@Encinozojuan 7 жыл бұрын
Why you didn´t show the material that use on any piece ? you must show us
@tubahebun 4 жыл бұрын
How can I access the technical drawings of these drawings?
@mechen6831 4 жыл бұрын
Hello my friend and thank you for the video. I have a question. In the first part solidworks won't let me use the Hole wizard. Do you know why? Thank you
@fred8073 4 жыл бұрын
maybe because you haven't selected a surface or a plan at first ...
@NazDonbass 7 жыл бұрын
Can you show how right create drawings and specifications?
@LuisAlbertoAriasEcheverri 7 жыл бұрын
I have the 2D drawings. I did them following the tutorial, Write me to email: ticoarias57@gmail.com
@JulesManson 7 жыл бұрын
me too. i'll write you.
@aatirsiddiqui4366 6 жыл бұрын
Can anyone will tell me that why these type of impellar is used ? Benefits?? efficient?? Plz tell me
@sivaram7240 5 жыл бұрын
1:00:11 two holes not concentric. How to slove the problem.. Pls explain that
@LuisAlbertoAriasEcheverri 7 жыл бұрын
The bearing of the pump shaft is not 3310 because the shaft has a diameter of 20 mm, so it must be 3320.
@elmeddinhuseynli492 4 жыл бұрын
hi. Do you know engineering calculation of pump manufacturing? if u do, can u please share it with me?
@karanbirsingh3082 7 жыл бұрын
can i get all of the dimensions for the parts
@rishikbharadwaj8994 5 жыл бұрын
Can anyone help me out by explaining what exactly happened at 53:00.... I mean when we r getting the angular contact ball bearing into the graphics area from design library the actual size is small.How did it fit accordingly into the disc
@shashankanumula 5 жыл бұрын
Please let us know any keyboard shortcuts used? Or How to get the desired size of angular contact ball bearing from design library?
@suayipoz8098 6 жыл бұрын
why colors are not on my computer ?
@gorkemodabasi7847 3 жыл бұрын
If it is possible, can u share 2D technical drawing? Thanks.
@musti197 5 жыл бұрын
can you send someone of this part dimensions?
@rajnishkantdas1279 6 жыл бұрын
Good sw ...yar.
@arunjaiswal2566 7 жыл бұрын
can you please make a video of kiosk please
@pmchannel9272 4 жыл бұрын
I did not find Tap Drills. How to get it. You can guide okay
@ManojKumar-lv5qo 4 жыл бұрын
Imazing design. But become more useful if explain every command in English. Nice Sir like for you
@mehzadirani3160 6 жыл бұрын
Can u pls share u r 2D sketch pls
@rohantau7660 7 жыл бұрын
Hello there Can you help me? I get stuck when try to make the bearing I cant found any of it Can you tell me step by step to found the ball bearing? Thank you
@alexdragota6890 6 жыл бұрын
Yeah i also cant find the bearings i have the solidworks tool box add in but for some reason the parts inventory does not include bearings which sucks cuz i have been making this turbo for like 3 hours lol
@Serhiy34 4 жыл бұрын
@@alexdragota6890 First configure the toolbox. Then use it. Solidworks help has a detailed description.
@benadjlaokbausthb 7 жыл бұрын
hi i need totoriel rolle forminge
@aldocastillo1194 3 жыл бұрын
por que no compartes los colores? en cuanto idiomas quieres que te lo escriban si seras amable de compartir las apariencias? Can you share each apperance? Kannst du bitte es teilen ?
@mayanksharma7941 Жыл бұрын
Please speak dimensions also when you make the drawing.
@januthranasinghe 5 ай бұрын
how can i find the source file for this ?? Can anyone helep me
@Guilhermefernandes-yw9sg 4 жыл бұрын
could share the E drawing?????????
@Sobociq 7 жыл бұрын
Where is the impeller?
@xeels2708 7 жыл бұрын
The impeller are the disks themselves. It is like a Tesla turbine
@abdellah9593 3 ай бұрын
@@xeels2708hello man did you understand how this turbo works can you help me 😅
@alirezahagdam6287 3 жыл бұрын
mersi
@WisshMell 7 жыл бұрын
Disculpa, me podrias pasar el plano de las piezas??
@LuisAlbertoAriasEcheverri 7 жыл бұрын
Yo tengo los planos de los despieces, los hice siguiendo el tutorial, escribeme a mi correo: ticoarias57@gmail.com
@cleysontoctoolivera8366 5 жыл бұрын
Luis Alberto Arias Echeverri me podrias pasar los planos bro¡ keyner.mec97@gmail.com
@douradesh 9 ай бұрын
does anyone have the drawing?
@ukasz5342 4 жыл бұрын
Anyone have a 2D drawing with dimensions?
@bpetnoi1472 2 жыл бұрын
I believe this is a Tesla pump, not a turbo pump
@yuvaraj9830 4 жыл бұрын
Plz share PDF file
@Serhiy34 4 жыл бұрын
Where are the gaps?
@haianh2726 11 ай бұрын
xin file part
@Drasnius 4 жыл бұрын
You skipped part 5
@Rajeshsingh-sq9ge 2 жыл бұрын
Name of the components please, anyone 🙄
@FatihGTR 6 жыл бұрын
43,45
@barbarossert 5 жыл бұрын
36:05 de ne oldu anlamadım
@tubahebun 4 жыл бұрын
bu parcaların teknık resımlerını nasıl bulabiliriz ya?
@maximethuillier795 4 жыл бұрын
trot bi1 le tutaux pour saulydewaurkce
@FatihGTR 6 жыл бұрын
31.31
@anbobo1662 5 жыл бұрын
h好厉害
@Kilaueaorph4n Жыл бұрын
Gaskets, anyone?
@aldocastillo1194 3 жыл бұрын
What is the appereance you utilizes, i like the goldish tone, but how do I create it, can you give the parameters of the colors?
CAD CAM TUTORIAL BY MAHTABALAM
Рет қаралды 287 М.
SolidWorks Tutorial ☺
Рет қаралды 705 М.
SolidWorks Tutorial ☺
Рет қаралды 283 М.
SolidWorks Tutorial ☺
Рет қаралды 380 М.
SolidWorks Tutorial ☺
Рет қаралды 113 М.
SOLIDWORK TUTORIALS
Рет қаралды 7 М.