Link to Syil X7 accuracy video - kzfaq.info/get/bejne/nLd0irmY16zDaHk.html

You can set the manual white balance on you 80D so that it is fixed. You currently use the auto balance mode, which would not change anything when you buy a new camera. It would be the same when you use it in auto mode.

Hello from AK. Great video Jay. I went back and forth for awhile between HAAS snd SYIL. Finally settled on a HAAS…but I’m with you I believe the SYIL is a great machine for the money and would serve someone well. My final decision was based on support plus the few guys I know up here are HAAS guys. Another reason was a pretty heavily optioned TM-0p was not much more out the door than the SYIL. I will state I have ZERO cnc experience, I’m learning as I go. Thanks again.

Great video Jay, lots of good content. I have the same X7 but with the Siemens 808DA controller, and 4th axis. So far, very impressed with this mill.

Thanks for taking the time to do this review on the Syil CNC, & answering questions!

Interesting addressing accuracy and precision. Repeatability is often in the specifications most CNC machines suggest plus or minus 0.0002 inch with a positional accuracy of plus or minus .0.0002 combined taken at extremes radial error would be taking the full error (Square root of (.0004^2 + .0004^)) that's the best you could hope for. My experience I have found most CNC machine have sweet spots where everything aligns least amount of variation exist. I would favor hard mill work to a side and position on the machine not the sweet spot to savor and save the sweet spot for when the work called for it. A consideration. Good points here nice video. Thanks for sharing.

great video. I had a lot of questions answered. I really appreciate these videos you put out.

Thanks, Jason.

The gap between the face of the spindle and the flange in the tool holder is 3mm. The nominal distance from the face of the spindle to the gage line is 1.5mm The tolerance on this dimension is not very tight since the main goal is ensuring there is a sufficient gap between the spindle face and the flange of the tool.

Can’t wait to get the upgraded control software. Great video Jay!

X7 has always been my way to go CNC for a small scale business. Everyone that knowns a bit about CNC cannot dislike this machine. In its price range there is no competition with other new machines out there. IF you try to build the same machine DIY you will end spending the same amount of money than buying it. The only one that comes with better price (but not epoxy granite structure) are the VMC 420, 422 and 425 from another Chinese brand. They are around 11-14K all included. Really nice too

Thanks for the video. Ive been looking at both the X7 and tormach. Leaning heavily toward the X7 at this point. Seems like its in a class above Tormach for a relatively similar price point.

Jay, thanks so much for looking at the Syntec controller. It would be great if you could do an entire episode on it.

Haas mini mill yr 2000 stupid accurate. It only has a 6000 rpm spindle. I have a tormach 770 and thats a toy. Very happy with this machine.

wtf a schneeberger casting??! That is crazy in this price class :-P

There is one in Denmark, he speaks english very well.

the yellow on the camera is you must have it on auto white balance, find one you like and set it manually

thnak you Jason, I'm waiting my X7 with 22MA. How I can get the the updated software when it release? maybe you can share a Contact Person for us.

Hi Jay My X7 is on a container ship somewhere - left 5 days ago for Australia. You mentioned that there has been some Syntec controller firmware upgrades. How quickly does Syil China make these upgrades available for existing X7s owners with the Syntec 22MA controller?

What was your total cost?

Hi there I'm looking at purchasing my 2nd machining centre I was thinking of haas mini mill 2 but in Australia there very expensive for size of the machine so I'm very interested in the syil x7 I need rigid tapping which controller on this machine has this option? Also what post processor does it use ? Is it just fanuc post ? Cheers Mark

how much is the initial investment

How easy is it to up grade like if I wanted to add a 4th axis I know tormach is really esay

Can some one gives me the price for this machine

Roughly how much this machine cost if it's on the cheaper side I may purchase one in 3 to 4 years.

I think people maybe get confused with what they think is accuracy vs repeatability? personally I would be more concerned w repeatability.

are you gonna upgrade to a 5-axis cnc? okuma vs matsuura video?

Hi Jason. Does that mill have thru spindle coolant ? Another good video. Take care Bud

Great video. I’d like to sell my tormach 1100mx and get a x7. How do you like the whole syil experience so far?

So, just for full disclosure, you received this machine for free with the sole purpose of being an influencer. Are you still running your Super Mini mill or did you move forward with acquiring a 5-axis mill?

How about the paper towel holder top left? You make it or buy it?

Would you get the 5 axis add on for this mill?

Does it run on 400v? As 380v was just the old standard in Europe.

no bbtter camera just set White balance :)

How much did you run you

Are you in Texas?

take the camera off auto white balance....that should fix your issue

Ill trade anyone my brand new 1100mx fully loaded (36k$) probing, tool setter, ATC, operators console, micro arc 4th axis, and every tool holder they offer for a SYIL X7