I have to say that the S&W Scholfield is honestly the most beautiful handgun that was ever made.
@TheWinterWolf18954 ай бұрын
it looks slick yet has a lot of moving metal parts which is what gun lovers love to just see.
@PatRMG3 жыл бұрын
I will definitely say that's the first speed loaded single action I have ever seen. As for that 7th Commie, I'd suggest hard cast and a well aligned shot.
@plowboysghost3 жыл бұрын
That should work. Over penetration, like overkill......is underrated :)
@alswann27022 жыл бұрын
@@plowboysghost Or a saber.
@plowboysghost2 жыл бұрын
@@alswann2702 I have an original 1840 heavy cavalry saber, thanks to one of my boys.
@AlphaFox38 Жыл бұрын
I find this technique utterly amazing!! What gets me is people that load 5 AT THE RANGE knowing they are about to shoot. Would one do this against bandits or savages? I think not!! LOVE THIS!!
@George-ue3er2 жыл бұрын
The SAA in .45 Colt and 44-40 you can do something similar. This idea of resting the hammer between the rims is a hold over from the cap and ball revolvers resting the hammer in a safety notch or on the safety pins between the chambers.
@chuchuchip Жыл бұрын
Who'd a thought a speedloader would work with a break top? Made up my mind, I want a Scholfield!
@octopussmasher26943 жыл бұрын
That’s some pretty good thinking there.
@plowboysghost3 жыл бұрын
Thank you.
@Real11BangBang3 жыл бұрын
For all the people out there saying that the revolver is a terrible carry option let me remind you it only takes one especially with 45 Colt.
@richardcummings18062 жыл бұрын
Yupp. Most people that are talking crap most likely couldn't hit a vital organ on a moving target with 15 +1 at 7 to 10 yards lol with a low recoil cartridge like a 9mm.
@MikeGraham-ju8xs Жыл бұрын
Excellent thoughts sir. Of course this always works on singe action 38s and 32-20s but not seen it done on a 45LC; well done indeed.
@psychobilly41623 жыл бұрын
First, you're the first guy I know of to use the words "tactical" and "Schofield" together. You deserve a like for that alone. Have you heard of anyone else doing something like this? My only concern (and I don't own a Schofield--yet) would be that it might be hard on that firing pin in the course of a day as you move around. I'm eager to see how this works out for you.
@plowboysghost3 жыл бұрын
Thanks! I'm sure I'm not the first person to do it. I'd wager that many were carried that way 100+ years ago. I don't consider there to be any potential for accelerated wear or damage, especially since it's in a holster when I carry it.... where the cylinder can't be moved around any. I thought on it and tested it for months before saying anything about it in a video....so I reckon it'll work out good.
@TightwadTodd3 жыл бұрын
@@plowboysghost Hallelujah,,,Finally someone who has stumbled on the Old Method for full carry..You are only the 2nd person to make a video regarding the subject that i have ever seen..I tire of informing people of this age old method and hearing that the "Cowboy Load" is the ONLY way to carry safely and is the old way it was done..This is untrue and is spread by many,who are considered "Experts" on the subject..This is the way i was taught by old timers when i was young,who had carried single action revolvers,mainly colt single actions and carried for serious everyday use and not for recreation....Thank you and props..I subbed..
@LibertysetsquareJack6 ай бұрын
@@TightwadToddSame. Subscribed. I was looking for confirmation on this very thing (carry on six), plus the speedloader use...lol Thanks.
@mothman-jz8ug5 ай бұрын
Yep, everything can be made "Tactic-Cool" if you try. This is great for all the Tactic-Cool people - You know, the ones whosee themselves as GI Robo-Cop Joe and can't form a complete sentence without the word "tactical" in it. (Might want a tactical Stetson hat when shooting this.)
@Mis-AdventureCH Жыл бұрын
I just sent my cylinder to TK Custom in Illinois and had them mod the cylinder to take .45 ACP on moon clips. Works awesome. Will still take the .45 Colt as well, so now it's dual service. Be sure to get their moon clips specifically for the schofield. I run the same reloads I use in my Webley Mk VI and it shot super tight.
@plowboysghost Жыл бұрын
Sweet!
@Mis-AdventureCH Жыл бұрын
@@plowboysghost Yea, it's a pretty cool mod.
@mothman-jz8ug5 ай бұрын
Now you can, but why would you want to???
@Mis-AdventureCH5 ай бұрын
@@mothman-jz8ug Moon clips. I run a shaved Webley and like the speed of that set up. With the mod'd Schofield I can run .45 acp as well as the 45 colt, which I'm reloading for both, but have some decent 45 defense loads I want to try in it. Admittedly not a nescessary thing, but it's a dual caliber platform now.
@kmorris1802 жыл бұрын
Great to see someone else who carries a top break. One of my carry weapons is a Smith and Wesson DA 44 that was made in 1883. I never thought about using a speedloader. Now I'm thinking I'll have to look into it. Thanks for the video.
@plowboysghost Жыл бұрын
Thank you.
@jamesa.76043 жыл бұрын
You're truly a man of innovation, Mr. Plowboy! I think you're on to something there. Will be giving that a try when I get my hands on a Schofield Revolver. Take care and keep thinking and experimenting. I had a .45 Colt question for you but of course it skipped my memory now. I'll write it down next time and keep it near the computer.
@plowboysghost3 жыл бұрын
Seems like a LOT of things are leaving my memory...or just not sticking. I remember a good bit from when I was a kid...all the way back to a year or two old in the early-mid '70s...for real! I barely remember what I ate for supper yesterday, though....heheh. I appreciate the good word, but I'd bet that others beat me to trying a speedloader for the Schofield. I'd also wager that, in the overlapping years of the S&W No.3 /Schofield and cap and ball revolvers' use and popularity that you could carry with the hammer between chambers.....that back then, a good number of folks probably carried the top-break Smith that way. Just a guess, though..... Thanks, my friend.
@jamesa.76043 жыл бұрын
@@plowboysghost Oh Yeah, I remembered my question. On the Man With No Name Revolver by Cimarron chambered in .38 Special, Do you know if it could handle .38+P rounds? Not a steady diet of it, just for self-defense if the situation arose?
@plowboysghost3 жыл бұрын
@@jamesa.7604 I know that it's not rated for +P, but I don't know what an emergency cylinder full of +P's would do to it. The cylinder has plenty of meat around the chambers so I don't know what the issue would be. I load mine with 158-gr Lee bullet over 4.5-gr of Universal...which is right on the verge of +P on most load data that I've seen. I don't know that a few more tenths of a grain of powder, solidly in +P territory, would help that bullet do anything it can't with 4.5-gr....so I've never been tempted to turn .38 Special up for that gun. As a matter of fact...I'd wager that my standard .38 Special load out of the 7.5" MWNN is probably running about the same speed or a hair more than 158-gr .357 Magnum does out of a 2" snubnose.
@samwalker78212 жыл бұрын
This may have been the intent of Major Schofield himself. There's a lot of Schofield's suggestive correspondence in S&W's period files, and one letter refers to a modification of the firing pin point being beveled on each side, possibly to carry like this. However, there is no mention in Army manuals on this. But it does work if you need that 6th shot!
@richardkluesek43012 жыл бұрын
Undoubtedly Officers and NCOs issued these revolvers loaded up 6 and carried that way as well as civilian professional cognoscenti, like the James Brothers and Texas Rangers and Wells Fargo agents.
@samwalker78212 жыл бұрын
To expand on my above comment, in a letter from Major Schofield to D. B. Wesson dated August 4, 1876, he stated "hammer to be beveled so as to drop between the cartridge heads, the arm can then be carried loaded with the hammer down". Recent Uberti's seem to lack a bevel but the hammer nose seems small enough to be used that way. Much safer than using the half-cock "safety notch", since the cylinder is free to turn. Anyone for "Russian Roulette"? lol
@richardkluesek43012 жыл бұрын
@@samwalker7821 Reminiscent of the system on percussion cap 'n ball revolvers, positioning a hammer down between 2 capped chambers.
@samwalker78212 жыл бұрын
@@richardkluesek4301 True. The concept wasn't new, but the application was. Major Schofield took a lot of pride in his pistol and had many ingenious ideas.
@dougmoore5252 Жыл бұрын
Good discovery placing the firing pin between the cases, would test this at the range a few times before carrying that way, agree with you.
@plowboysghost Жыл бұрын
I believe one of the fellers on the 11BangBang channel has found historic reference to carry of the originals in this manner, back in the day.
@Texo_McKevo3 жыл бұрын
I mean they did it back in the day with navy revolvers why haven’t they done it with any other single action revolver
@plowboysghost3 жыл бұрын
I know the reproduction percussion Colt Navy has a notch in the hammer and pins between chambers for carrying the same way...6 up. I *believe the original Colt Navy did, too...but someone may correct me on that. This method works just fine on this Schofield.
@coltonregal17973 жыл бұрын
@@plowboysghost The originals also had the safety pins on them. The manhattan firearms company also manufactured colt clones with extra cylinder stop notches to lock for the same reason.
@plowboysghost3 жыл бұрын
@@coltonregal1797 Good deal.
@jayhaddan7927 Жыл бұрын
Because your firing pin is resting on hard steel. Let it fall one good time and your gonna need a new pin.
@YouEatBabies19116 ай бұрын
Your pfp is amazing
@RabbitusMaximus Жыл бұрын
before the s&w 3rd model, perfected came along (the top break that also had a thumb piece like a regular Smith & Wesson model 10) there was the second and third model in 38 Smith & Wesson and it always struck me with that non-rebounding hammer that the reason why their firing pin was triangular and flat rather than round was precisely for this reason to lock between the rims with higher confidence that a cylinder turn would not jar the pin up over the rim. I also use a regular five shot 38 snubby speed loader for tactical speed loading the little top break as well. And I do the same thing for the Webley 455. Good video!
@alswann27022 жыл бұрын
I always enjoyed the story of the California gold miner who slew six road agents with a Colt dispatched the seventh with a Bowie.
@RooftopKY3 жыл бұрын
I knew about the carrying 6 between cases, but I'm glad to know the HKS #29 speedloaders work. I shall go procure some forthwith. Thanks!
@plowboysghost3 жыл бұрын
Thank you!
@scottydwallace19 күн бұрын
This also works on turn of the century IJ or HR type 32s&w and 38s&w top breaks. Those are already 5 shot guns so dropping on an empty only gives you 4 shots. The old 38s&w 5 shots can also use a J frame speed loader. Nice video
@plowboysghost19 күн бұрын
@@scottydwallace 🤠👍
@smokeytokyo45533 жыл бұрын
That's actually a pretty Interesting point it seems to be solid I'll have to try it
@plowboysghost3 жыл бұрын
If there's any doubt, test it with empties like I did. I carried my Schofield to town today right after making and uploading this video....loaded 6-up.
@smokeytokyo45533 жыл бұрын
@@plowboysghost I will. thank you plowboy.
@GENTSEVE101 Жыл бұрын
If colt were to ever do a repro of the old erstwhile trooper, exposed ejector rod and all, and find a way to pack the cylinder with 8 rounds of 357, I'd go ahead and consider that to be the finalised form of the perfect revolver. Until that day, a model 3 accompanied by a couple speedloaders fits the bill for me.
@TaxationIsTheft694203 жыл бұрын
Damn. That’s solid advice actually. I carry my Cattleman II in 45 colt sometimes with 6 cause of the special firing pin. That’s a good idea for the schofield.
@plowboysghost3 жыл бұрын
If yours is a Cattleman II, like the Taylor's Smokewagon Deluxe i had, I wouldn't hesitate to load six in it. I carried the one i had that way until I defeated the "safety" system.
@TaxationIsTheft694203 жыл бұрын
@@plowboysghost defeated the safety system? What do you mean?
@plowboysghost3 жыл бұрын
@@TaxationIsTheft69420 I took the spring out of the hammer, shortened the actuator rod, and fixed it in the "up" position so that the firing pin would stay fully fixed in the "out" position....like a Colt/Pietta/Old Model uberti/etc... I did a video on it in January of 2019.
@TaxationIsTheft694203 жыл бұрын
@@plowboysghost Ah! Ok. I thought you meant you broke the safety by carrying it and it made me nervous. I carry it on horseback for the last 2 years and have never had an issue even with it bouncing. They’re great guns.
@spiritualawakenings62512 жыл бұрын
Great video. This is how I carry most top break revolvers and have for over 45 years with no issues. I still do it in my new Uberti Schofield's even though they have the hammer block safety's. There are just too many safety nannies on the net.
@duceawj50092 жыл бұрын
What holster do you use?
@spiritualawakenings62512 жыл бұрын
@@duceawj5009 Right now I just use a triple k thier standard 6 gun holster it works well with a small modification. I cut out a small piece so the barrel latch will fit.
@marblemarble71132 жыл бұрын
they added hammer block safeties?
@spiritualawakenings62512 жыл бұрын
@@marblemarble7113 Wow it took 7 months to get a bite. Amazing. Yeah you carry it with your thumb under the hammer. Hammer block safety, get it?
@marblemarble71132 жыл бұрын
@@spiritualawakenings6251 lol
@Sm-ne8ff Жыл бұрын
I have a Uberti Schofield and I have those speed loaders and I have no problem carrying six in that exact same way, I never e en thought of sharing that info, of course I dont know too many people that have that revolver either.
@badtchad4935 Жыл бұрын
Can’t believe more people haven’t thought of this. Good job 👍🏻
@alanbryant82457 ай бұрын
Great video will try the in-between hammer rest …….like you I always had it on an empty chamber with my Schofield before ……have been using the speed loader idea for some time had my 29 and the Schofield on my bench with speed loaders and tried it thinking it wouldn’t work but it did. Excellent channel keep up the good work really enjoy the videos.⚓️🇺🇸
@plowboysghost7 ай бұрын
Thank you
@05709653 жыл бұрын
Never thought of that, sounds like a good idea. I did not know if it was possible, but I would give it a try.
@cipherthedemonlord80572 жыл бұрын
In regards to putting the hammer between cartridges you can do the same to a solid frame revolver at least an 1875 Remington repro. And 38 special speed loaders for six shots work good for British Webley MKIV and Enfield revolvers.
@Predalien1952 жыл бұрын
I've had my Schofield for about 2 years now and I've been using the same speed loaders for quite a while. I've also got speed strips which while not AS fast often don't have the same issue of the cylinder turning freely when trying to get the speed loader in place. That said, I always carry on 6. The whole reason people used to carry on 5 is not really that relevant to the modern era for a variety of reasons. To each their own I say but no reason to be deprived an extra round.
@bernardconeghen6 ай бұрын
was lucky enough to get a speed loader for 45 colt they work great thanks to you enjoy
@flintlockhomestead460 Жыл бұрын
Well, someone else has discovered my secret. I don't have a Schofield, but I have been using the same technique with some of my other revolvers. They don't have to be single action either. I carry all six chambers loaded in my 2nd model S&W American, my new model #3 Frontier, my 1881 S&W double action Frontier as well as my drawer full of S&W 38 double action top breaks from my 2nd model made in the 1880's to the last model made in 1919. Won't work with the lemon squeezers though. No external hammers. I also carry my Colts in this configuration but it's a little more tricky because they're not top breaks. You have to cock the hammer and, while keeping the muzzle pointed in a safe direction. pull the trigger and gently lower the hammer with your thumb while rotating the cylinder with your other hand until the firing pin comes to rest between two case rims. This works with my Colt Frontier Six Shooter, Colt Bisley Frontier, Colt 1878 double action Frontier, and my 1860 Richards conversion in 44 Colt. Oh, the appellation "Frontier" started with Colt but came to designate any revolver chambered for the 44WCF(44-40) cartridge.
@marblemarble71132 жыл бұрын
if these things were double action and in .44 special/magnum then they would be the king of firearms
@allegany485camp3 жыл бұрын
Thanks for the video. Have a Merry Christmas!
@plowboysghost3 жыл бұрын
Thank you...and Merry Christmas to you, as well.
@jeffreygray35210 ай бұрын
You addressed the only concern I had. Brilliant design!
@johnparrish92153 жыл бұрын
There used to be some revolvers back then that did this on purpose as a safety feature. I can't remember what brand it was but I do remember it had a tiny pocket for the firing pin to rest in.
@duceawj50092 жыл бұрын
It was an addition to colt patent revolvers in the 1850’s-1860’s and then everyone copied them pretty much
@jeffersondavis2530 Жыл бұрын
Great observation ! Thank you for passing it along.
@redesert_boy82023 жыл бұрын
The putting the firing pin between the cylinders makes me think of the NAA SA derringers where they are designed that way.....As for number 7 or 8 you could either carry that second SA cross draw or left hand or just use a 45 Colt Bond Arms derringer left handed if proficient to fend off any remaining threats while getting that Schofield open and ejected before grabbing the speed loader.....then after reloading that No. 3, you could reload that derringer from a speed strip when you get a chance. I believe the truth is you just love those 45 Colts....Thanks Mr. plowboysghost....
@plowboysghost3 жыл бұрын
I have been accused of favoring a .45 Colt....and i really don't try to defend myself from the charge...heheheh Thanks!
@LUVDOGS19543 жыл бұрын
Very interesting discovery...I will check this out on mine. Thank you for another fine video.
@plowboysghost3 жыл бұрын
Thank you.
@chrisloUSA25 күн бұрын
Thanks for sharing this, I was wondering forever what speedloader was compatible with the Model 3. The bit about safely carrying 6 is handy to know.
@plowboysghost25 күн бұрын
@@chrisloUSA Thanks 👍
@walterashley149 Жыл бұрын
I've got 1 Taylor's conversion cylinder (5@ .45) that has the extra stop notches milled into it to leave it locked in between. The other Taylor's I've got do not have them. Although, on the good one that has extra stops, I did have to hand file the cylinder hand "star notches" on the back of the cylinder to get it to function properly. Was possibly for another manufacturer, but got it working.
@pnicholas19672 жыл бұрын
Great video!! I assume you’ve already removed the safety bar (which a lot of folks do)…. If the safety bar is still installed, the first click is the safety notch which allows you to carry it the same way as the safety bar is in place until it’s fully cocked. At least that’s how mine works…
@plowboysghost2 жыл бұрын
Yeah, I have a small collection of Uberti Schofield safeties in a glass :) Thanks!
@060racing82 жыл бұрын
This is why I would have carried a Schofield if I could back in the day
@Mike-bb5tb Жыл бұрын
It's a cool designed gun, thanks for the tech tips..
@plowboysghost Жыл бұрын
👍
@fhorst41 Жыл бұрын
Good advice
@hamm60353 жыл бұрын
Been doing the same thing for awhile. And dealing with 7 means having 2 Schofields. Hahaha
@plowboysghost3 жыл бұрын
10-4!
@robertrobert7924 Жыл бұрын
Excellent video.
@whiskeytangosierra63 жыл бұрын
That just decided me, been wanted a No. 3 for years, ordering one now.
@paulkopacz50513 жыл бұрын
It kind of irked me that with single actions you really should only load five for safety but I understood it. SO I got myself a Ruger Vaquero! Then I just had to get an Uberti 1866 rifle too. Looks like I have reconciled my lack of ,45 Colt Cowboy guns. Happy shooting Plowboy!!!
@plowboysghost3 жыл бұрын
Yep...you're good to go 6-up with a transfer bar. I've had a bunch of 'em and still have one (SBH .44 Mag that was my dad's). On the Colt SAA clones, with fixed firing pin, I'm not going to advise anyone to carry six...but i have tested one or two and have some opinions on that, too. I just don't want to risk advising someone to do something that gets them or someone else hurt. Thanks!
@mkshffr493610 ай бұрын
That and a couple N frame speed loaders and we have the true tactical Cowpoke.
@plowboysghost10 ай бұрын
Or...a true tactical shootist/outlaw/etc... I don't own any cows.
@threeoeightwadcutter2820 Жыл бұрын
Great tip
@InvidiousIgnoramusАй бұрын
Given that NAA puts actual safety notches on their mini revolvers, I'm surprised none of these top breaks had done something similar to their cylinders. I'd think it a little more reassuring than doing this personally.
@tommyboy62672 жыл бұрын
That is absolutely brilliant. Thanks.
@asbjorn48343 жыл бұрын
I've done this as well. But I would love them to make an 1875 Remington "Outlaw" with a transfer bar. Is that too much to ask for?
@scotthamp38410 ай бұрын
I've heard Hickok45 say that decocking from half cock actually wears on the hammer action. At least on the Colt and Colt clones. It's possible that it applies to the Schofield
@plowboysghost10 ай бұрын
He's wrong. There's no more wear decocking than cocking.
@mothman-jz8ug5 ай бұрын
OMG, the "Tactic-Cool" gang have discovered the Schofield. Now they will be donning their tactical running shoes and tactical headgear to rush out and buy one of these. Don't for get to put your tactical pants on in your rush!
@plowboysghost5 ай бұрын
Hehe ...appendix carried Schofield with a plate carrier🤣
@Texo_McKevo3 жыл бұрын
You know my dad had thought that a schofield and a speed loader would work. Most of my friends in high school thought I was crazy thinking carry. There guns kept having there guns jammed with what ever guns they owned.
@plowboysghost3 жыл бұрын
Now....you MIGHT be crazy....right along with me.....heheheh. I love my single actions, and they go with me 9 times out of 10.
@Texo_McKevo3 жыл бұрын
@@plowboysghost I mean I am the black sheep and my friends think that carrying a revolver such as that is dumb and insane and it’s going to be funny to see them have a hard time finding 9mm now and days
@plowboysghost3 жыл бұрын
@@Texo_McKevo All those who know me have gotten used to me carrying revolvers all the time. What surprised me (and my wife) was just how many young ladies running cash registers really seem to like the "old" guns and the hats/dusters/frocks.....heheheh.
@laddjm3 жыл бұрын
There’s an outfit called TK custom that will cut the cylinder for moon clips. Pretty handy.
@kylewood83272 жыл бұрын
Wow, who would of thunk! Going to see if this works on my Uberti Birds Head.
@Greenmachine305 Жыл бұрын
I like it.
@Leverguns503 жыл бұрын
I seen muskrat outdoors do the same thing with a regular 73 style colt, I think it would work the old cap and ball revolver‘s did a similar thing
@plowboysghost3 жыл бұрын
I have tried this in a Colt clone or two over the years. I haven't really got around to messing with the current Colt clones I have, but I will. I need to come up with creative video concepts to offset the fact that I'm not shooting anything lately. I *may* get into recreating scenes from some of my favorite movies, or something. I've been thinking on that for a long time...and have brothers/kids/friends that would love to help. Of course....we run the risk of "Plowboy goes to Hollywood"....heheheh not :)
@TightwadTodd2 жыл бұрын
Yes He did and was the first video i ever saw,that dispels the myth...
@orbyboy1233 ай бұрын
Need a modern version with a transfer bar.
3 жыл бұрын
Cowboys versus Commies!
@plowboysghost3 жыл бұрын
Dang right!
@telesniper22 жыл бұрын
You can get it milled for moon clips too
@Sharpbevel3 күн бұрын
This is what North American Arms does with their derringers. It’s made to lock this way.
@traemcpherson7266 Жыл бұрын
North American Arms, does this same method with their revolvers. They built a notch into the cylinder, for that purpose!
@RustyClam Жыл бұрын
This was back when men were men and women were glad of it.
@plowboysghost Жыл бұрын
You got that right!
@kevinhurley7021 Жыл бұрын
nice firearm to play with on the range , cool design. Looking to purchase one myself. as far a carry every day carry , not for me ya'll
@ProjectRescues3 жыл бұрын
So I'm looking for a 45 Colt revolver. Single action or double action. What's the best one that you recommend for single action and the best one you recommend for double-action. I'm getting a Uberti winchester model 1873 rifle, and would like a good 45 Colt revolver to go with it. So far my favorite is the Uberti Cattleman, and the long barrel version of the Uberti Cattleman. Both nickel plated, but I'm still looking at others as well. I looked at a Schofield yesterday, and also a Uberti 1871 Colt Navy Open Top and also a Taurus Judge. I'm still undecided on single or double action, and which one would be best for defense. Any suggestions?
@plowboysghost3 жыл бұрын
I personally prefer a single action in most moods I'm in. The only .45 Colt chambered double action I've ever owned was a Judge magnum...and I didn't keep it long. Nothing "wrong" with it, just didn't fit me. I split my favoritism on barrel lengths of a Colt SAA pattern revolver between 4-3/4" and 7-1/2". I have both, and have had several of each length, but 5.5" just doesn't "fit" me, either. I like the 4-3/4" for crossdraw carry, and 7-1/2" for strong side. I love my Schofield, but you can come within a few dollars of buying 2 Colt clones for the price of one new Schofield. If you really like the Schofield (or LOVE it like me), then it's worth the money. I actually want a Navy gripped Open Top in .45 Colt, myself. With regards to "defense" usage.... I recommend a single action but only if you're comfortable with working on the muscle memory, etc... required to make fast(ish) repeat shots. I have carried a single action revolver 9 times out of 10 that I've carried a sidearm in the last 10 years. I do, however, really like my 4" Model 29 and even my CA Bulldog .44 Spec., so I'm not immune to the draw of a double action.
@ProjectRescues3 жыл бұрын
@@plowboysghost Yeah, at first I was looking into getting a Uberti Cattleman, but I think what I really want is a nickel plated Uberti Schofield 45 colt. I found a few lately, but I'm not really a fan of the blue'd finish, I'm a sucker for nickel plating, ha. So I may just go to Uberti directly to get one since I haven't been able to find one like I want in the right caliber.
@Sirsandonthecoot2 жыл бұрын
@@ProjectRescues my carry gun is a 3.5 in H&R top break chambered in 38 S&W great little vest gun its sa/da and i got my wife an H&R 32 S&W top break both guns are over 100 years old work flawlessly as well as small enough to conceal but still comfortable in the hand as well as being top break so they are faster to reload. I use to carry a small M&P shield simi auto and got away from that when I had a miss fire with a assailant because the pistol was jammed to far in an locked the slide from firing. needless to say i didnt end up shooting the guy and everything worked out great, back up arrived and we got him cuffed, i no longer work law enforcment but that day taught me that sometimes more rounds are not better now all i carry for personal defense is a revolver.
@williehenton81542 жыл бұрын
Awesome
@koolaidblack7697 Жыл бұрын
How's the Schofield treating you these days Plowboy? Any issues at all with it now that you've put some rounds through? I'm considering buying one but I'm just not sure yet.
@plowboysghost Жыл бұрын
I traded the last one off last year, but I love the Schofield.
@FASmith-qd1yj Жыл бұрын
My Taylors & co dose not work this way. It only locks when the cylinder lines up with the bore. I do use a speed laoder, tried the one I had for my Red Hawk the day I got it.
@plowboysghost Жыл бұрын
If you're referring to carrying the hammer down between chambers, the cylinder isn't technically locked up when you carry that way. It won't turn only because the hammer nose is between case rims...not because the bolt is in the notch.
@jcools7343 жыл бұрын
Jeff from Gunblast had one cut for moon clips =AWESOME!!!
@plowboysghost3 жыл бұрын
Heck yeah.
@soylentgreen70743 жыл бұрын
Jeff unfortunately passed recently 😢
@jcools7343 жыл бұрын
@@soylentgreen7074 I saw that! He was great!!!
@tbjtbj47865 ай бұрын
The only? I would have. Is how strong is the firing pen with force working against the side of it? Kind of like sher pen force on a bushhog. If somehow the cylinder gets hit to where it tries to spin with the cartridge rim hiting it will it snap?
@plowboysghost5 ай бұрын
I can't imagine that happening ...unless you're holding the hammer forward and turning the cylinder with the other hand TRYING to break it. Even then, I don't know how hard it would be to break it...but it ain't happening without intent.
@IntheBlood67 Жыл бұрын
Outstanding!
@EricDaMAJ2 жыл бұрын
Nice. I have a Schofield but I don't carry it for self defense. But if I ever did chances are it would be 'cause I was expecting a fight and I'd definitely load six.
@Fivemileshot Жыл бұрын
I thought I was the only one who did this with my 1873 revolvers, but some times I have to file off some of the rim.
@wrxs17813 жыл бұрын
Great video Plowboy, back in the day Safariland made those speedloader, and what is the make of your new Scholfield. They are mucho dinero up her in Canada so it is on my want list. All your viewers must understand you don't need a 44mag with a 45 Colt in your belt.
@plowboysghost3 жыл бұрын
This is another Cimarron Schofield. I got it back in April of this year when I traded the S&W 29-10 Classic that is on the table in this video for it new. I think it's "funny" that I ended up with both of them in the end...heheh I saw on Facebook that another youtuber killed a deer with a Cimarron 1860 R-M Conversion .45 Colt a few days ago or so. He was using weaker "cowboy" level Hornady ammo that was a 255-gr. cast bullet at about 725 fps..with one shot at 55-yards. That *should* be near 150-200 fps slower than my handloads with the same weight bullet.
@nickdershem77242 жыл бұрын
Only problem with this technique is unless you carry it in a way where you can be sure nothing is going to rub or snag the hammer, it's not too good a practice. I fooled around with this on mine and not very much movement on the hammer and it pulls far enough to slip out from between them.
@landonsimpson78393 жыл бұрын
What do you think about carrying a colt saa or clone for self defense carry. I personally see nothing wrong with it, especially if you load it the plowboyghost way.
@plowboysghost3 жыл бұрын
I carry a single action replica revolver nearly every day, and have for years. There are those who wouldn't, but there are also those who don't carry anything at all. There are also those who carry single stack micro-.380's and 9mm's deep in their pockets and feel good about it. Everybody has their own level of sensitivity and own sense of "good enough". Mine just happens to rest on whatever gun I feel best with, so long as the caliber/cartridge is adequate. Some would disagree with what I carry, but then I don't see everyday, rural, northwest Alabama as a potential John Wick-scenario kind of day.
@landonsimpson78393 жыл бұрын
@@plowboysghost great reply, thank you
@josmoify Жыл бұрын
the dreaded seventh comi and the Schofield
@SuperSneakySteve2 жыл бұрын
That looks like a Charter Arms to your right. Are you going to make a video on that one?
@sumdude91163 жыл бұрын
My every day carry is a single action six and that's how I carry.
@joshuadell32793 жыл бұрын
Strangely i considered this as a carry revolver
@texasghostrider96443 жыл бұрын
Yo plowboy. Texas Ghost Rider here I have me a Schofield and the speed loaders are actually very slow when you're in a hurry shooting. I have a Smith & Wesson 45 I forgot which model it is, and I use the moon clips and they are very good in that Schofield. How about you give us a video of you using them Moon clips for your six shots.
@plowboysghost3 жыл бұрын
I've never owned or used moon clips.
@texasghostrider96443 жыл бұрын
@@plowboysghost Ok. I think they worked very well. Not 100% sure that the moon clips used for the 45 Smith & Wesson revolvers will work on the Schofield. Not 100% positive at all. So what I would do if I were you, is get some dummy rounds of the same size with that moon clip and see if they fit in or not. At least that's what I would do.
@jamesa.76043 жыл бұрын
Hey Plowboy, I was watching this video again and an a question came to mind. Using moon clips, could you shoot .45 ACP in that Schofield? Wish You and Your Family a Safe and Prosperous 2021!
@plowboysghost3 жыл бұрын
I don't believe so, but I'm not a moon clip savvy kind of guy. With that question, we've exceeded my knowledge. My best to you and yours in the next year, as well!
@Mellotronaic3 жыл бұрын
Ordered a Schofield in .38 Special. Do you think a regular old .38 special speedloader will work with the Schofield?
@plowboysghost3 жыл бұрын
I honestly don't know for certain with the .38 version. I would think it should with a 6-shot speed loader...but I might waste the money and find out I'm wrong.
@linasmagnum3 жыл бұрын
That's how Brits disigned their Bulldogs and such to carry back then
@cameroncovington57053 жыл бұрын
Been watching your channel for a while now and love the content. I've been looking at getting a Cimarron Schofield in 45 colt and I was wondering if there was any factory ammo to stay away from (i.e. too much for the gun power wise) I'm new to cowboy action stuff any help would be greatly appreciated.
@plowboysghost3 жыл бұрын
Thank you. As far as i know, anything non "+P" is safe for these replicas. I haven't bought factory .45 Colt ammo in years now, so there might be something out there I'm unfamiliar with, but I would run any factory loads that aren't +P. I haven't ran any 300 + gr loads in one, so I can't advise on the heavy, standard pressure stuff.
@cameroncovington57053 жыл бұрын
@@plowboysghost I figured as much, just wanted to do my do diligence and ask around. Hopefully things will slow back down and i'll be able to get some ammo. Ever since watching Unforgiven as a little kid i've always wanted one and after holding and shooting one it sealed the deal. For me at least it feels better than a Colt. Thanks for the reply. Sic Semper Tyrannis
@plowboysghost3 жыл бұрын
Unforgiven made me notice the Schofield too. I always worried that I might not like the ergonomics, but although completely different than my Colt and remington clones, it actually felt goo in my hand. My local dealer is messing with me, though. He's got a new Spencer carbine on his wall, too.
@cameroncovington57053 жыл бұрын
@@plowboysghost Thats another gun on my list but just a bit too pricey for what it is. Maybe one day.
@greeneking772 жыл бұрын
4:31 I had always thought that that was a machining defect on just my gun but I see yours has that oval shaped line etched on the one side with the screws. Do you know why it's there?
@TheWinterWolf18954 ай бұрын
THE SCHOFIELD HAS A HAMMER-CYLINDER SAFETY FEATURE?
@montanamountainmen61043 жыл бұрын
Old habits die hard, I still today in all revolvers load only 5 with the hammer on a dead cylinder.
@plowboysghost3 жыл бұрын
Some need to be loaded that way. Uberti built Schofields seem to be the exception to that rule.
@montanamountainmen61043 жыл бұрын
@@plowboysghost Well sadly I never fired one, always wanted one after watching 3:10 to Yuma with Russel Crowe.
@plowboysghost3 жыл бұрын
@@montanamountainmen6104 I believe the movie Unforgiven was the first time I remember hearing the name "Schofield". I thought about them only when I'd see a top break S&W at a gun show over the decades...until I got into Cimarrons and started seeing them. It took awhile for me to jump on one, though....having never handled one and their costing twice as much as what I'd been buying up til then. I'm hung on them, now.
@montanamountainmen61043 жыл бұрын
@@plowboysghost Well I had a Schofield 44-40 in my hand until I saw the $1200 price tag.
@plowboysghost3 жыл бұрын
@@montanamountainmen6104 I understand that.
@jeffreysnethen9586 Жыл бұрын
I've been carrying my cartridge conversion revolvers that way for years, if it hold 6 I load 6.
@HDBujutsu17754 ай бұрын
👏🏻👏🏻👏🏻. Pronounced “Showfield”
@SuperCourser3 жыл бұрын
mighty good ideal..:)
@jacksteelo79893 жыл бұрын
Cimmaron's The Man With No Name does this, too. Mine has a wiggly firing pin, though. Any thoughts on how to tighten it? Been enjoying your content all year.
@plowboysghost3 жыл бұрын
I believe about all hammer mounted, fixed firing pin wiggle a little bit. I *think* they are designed that way. I know all I currently own are that way. Just checked mine and yep...it will lock between chambers too. Good deal. Thanks!
@feraligatorade993 жыл бұрын
You can lower the hammer on the MWNN in between chambers?
@jefferyvollers27053 жыл бұрын
You show a lot of the Schofield, is it your favorite?
@plowboysghost3 жыл бұрын
Seems like it. I carry my Colt SAA and Remington clones more often, but I believe the Schofield is my favorite.
@joshuadell3279 Жыл бұрын
If someone had the 38spl I wonder which speedloader they'd have
@plowboysghost Жыл бұрын
Not sure...but I'd expect one of the common 6rd .357/.38 revolver speedloaders to work.
@usualsuspect51736 ай бұрын
I've read that the 27 A works ok...
@ephraimgarrett47272 жыл бұрын
Seven ne'er-do-wells coming at you when you're carrying a 6-shooter is going to be a bad day, even if it's a double action. ☹️
@plowboysghost2 жыл бұрын
Yep. Thankfully, such scenarios in the civilian world are exceedingly rare.
@garrettfromsmokeinthewoods2 жыл бұрын
Lol and that was when Jim "plowboy" bowie pulled his knife and and bond arms 45 and went to work.
@NCLUSA2 жыл бұрын
I wouldn't do that, because the cylinder is being held in place by the firing pin, if IF? the cylinder should receive a blow (dropped or what ever?) the firing pin might get bent or broken. On these old guns I would stick to leaving an empty chamber under the hammer.
@christopherblowers29912 жыл бұрын
In schofield revolvers there's a mechanism attached the trigger that holds the cylinder, not the hammer
@NCLUSA2 жыл бұрын
@@christopherblowers2991 The guy is talking about having the cylinder turned as not to allow the hammer to rest on a live primer, did you watch the video?, did you understand the video?. That means the firing pin is holding the cylinder from turning, this is not a good way to carry a firearm .
@christopherblowers29912 жыл бұрын
@@NCLUSA I have a schofield, there's space between the hammer and the cylinder even if you have the hammer the whole way down
@NCLUSA2 жыл бұрын
@@christopherblowers2991 My point!!!!!!!!!!!! is if the cylinder is turned while the hammer is between the cylinders the only thing to stop the cylinder from turning is the FIREING PIN!!, can you grasp this?, if a blow on the cylinder strikes the cylinder the tip of the firing pin will take the blunt of the blow, how hard is this to understand???, THIS IS NOT A GOOD IDEA CARRYING A GUN IN THIS CONDITION !!.
@wilmamcdermott30653 жыл бұрын
Have the russian one in 45 colt i carry it the same way
@gypsymonk82293 жыл бұрын
Nice ! You see Bro , over here in Europe, it's getting very difficult to get permission but.....the guns which work on BLACK POWDER, even six shots revolvers are easy to legalise. I am thinking to get one in the future. There are lot of guns in Balkans, a lot of them kept hidden, the " souvenirs " from the 90 ties wars, but rarely people own this kind of stuff you've got. There are Magnums six shot and K 47 a lot , but Kolts are almost impossible to find ! Not to mention Winchester or similar. Indians are good , better watch out for these Antifa idiots and communist indoctrinated fools , they are brainwashed to cose trouble. Domestic terrorism is created by design, I think you know that . Love you Bro , be safe ! 🙏 Baba Nam Kevalam!
@plowboysghost3 жыл бұрын
I often think of how folks over there and elsewhere can't own/carry like we do here. I can't imagine living in California or other states here that, although they have a Constitutionally "protected" Right to own and carry guns, they don't assert themselves and claim that right. Those other places that don't have a Right to firearms recognized in their governmental framework might as well be the moon, to me. I wouldn't know how to act. I imagine that a couple centuries (or more) ago, that I would have more in common with the "Indian" (native American) way of life than I would the white man today. I would probably sympathize more with them in their day...as long as they weren't attacking me or mine, that is. I could get along with just about anyone who wanted to get along with me. These neo-Marxist revolutionaries in the streets of the United States, and those pushing their influence/about to take power, are not the kind of people that someone like me could EVER get along with.