When you say that you want speed but don't want to damage the car, I totally understand lol. I'm the same with my cars, not about that destruction life. I'd rather keep mine in a fairly good condition and still have fun with them. 👌👍

That's so quick!!!! 88mph!!! Back to future man!

I’m glad Tamiya still offering these super stocks. Sagami micro motors in Japan manufactures these motors for Tamiya. Before the take over of brushless Sagami manufacturer almost all the high performance brushed motors for other brands (Orion, Yokomo, Kawada, Atlas, Etc). The other was Tokyo-Mech who made motors for Team Trinity (EPIC). Most new brush motors being made now (black can and copper end bell) are made in China and the build quality is no we’re near as good as the older Japanese built ones.

This sort of stuff is Gold Glenn, I'm a big fan of comparisons, and speed runs. I think it was a really good improvement over the Sports Tuned. Maybe the bigger difference on the 3s was just because it hit the sweet spot on that motor, and with the added bearings, it allowed it to run a little more efficient.Keep up the good work.

I heard rz was for Road or Race, bz was for Buggy, and tz was Torque. The bz motor comes with 2 foam dirt filters that go over the can, but they hide the beautiful motor. I would rather just clean it regularly. P.s. I only run my bz on a small 3s and it is glorious!!!!!! And once again... thanks Glenn.

It looks so good! Awesome bro!

What a little ripper! Loving these vids Glenn 👍

Didn’t know the RZ motor was for touring cars. I have one in my Wild One, have to say it’s brilliant, pulls the front end of the ground, plenty of torque and speed, all on a NIMH battery. Great vids Glenn 👍🏼

79 kph is definitely fast! Great video. Love these comparisons ❤️

I'm absolutely loving these speed run videos 😊 I would love to see a comparison video in the summer when it's warmer and you will have more grip.

Very interesting stuff Glenn. The car looked like it drove nice n straight to 👌 Can't wait to see the next vid. Thanks for the entertainment mate, definitely helping keep me sane during social distancing in Australia haha 👍🦘🇦🇺

Keenly staying tune for the next run

Can't wait for the next run.

That's going great and no damage has to be a bonus! 👍

great run Glenn mate yep freaks me out when it come to slowing down👍😊😎🇬🇧🇬🇧👊

Loving your work Glen 👍

Love it, top work Glen👍 Looking forward to the rz next👊 Might need a longer stretch of road next🤔

Nice sir thx your info,

Hey Glenn, love these types of films as much as the build films, doing great things, and you explain really well, which to me means a lot. I use the torque tuned motors in all mine, just as a bit of a hop up from the norm. Keep up the amazing work. Hope you get some sunshine soon. Ta. D. 😊👍🏻

That makes a lot of sense now because there isn't much difference between the bz and rz but maybe 1000 rpm the biggest difference I saw was it hitting max efficiency at different times.

loving these speed runs, once you are done with the current motors, would be interesting to see the performance of the vintage tamiya motors...technigold, dynatech...etc. in that speed machine...and just for a laugh see if you could somehow make a 380 size motor fit in just to see...haha!! keep up the great work glen!! we all eagerly await your next instalment.

Freeze the bearings not the can the idea is to make the bearings shrink so they will drop in easier

Thanks for showing how to replace the bushings with bearings.

Excellent video, great to actually see the differences between these motors in real terms.I can say this... I have Super Stock RZ’s in both a Hornet & a Wild One. Both obviously 2wd.. and running a 2s Lipo, they wheely and wheelspin if you gun the throttle. I’ve looked at the figures for the differences in torque between the BZ & RZ they’re both the same! ... only difference on paper between the 2 is that the RZ has 1000 rpm more.

POWER!!

Great speed run! The "motor service" is also very ist interesting A!

Great video G man💪 have literally just got a bz motor definitely will have to ball race it after seeing this 👌my original idea was for my monster beetle but after a bit of looking into and asking the hombres I've decided to go dirt tuned so doesn't shat it's pants and the bz can pop into the wild one😁👌

i not going to miss out on you teaching how to change them out my friend

Yeah man that’s cool your gunna need foams soon 😂😂👍👍

Nice super stock tamiya brand high add power gift the fitback

Great vid 👍. Really interesting to see these comparisons. I thought you might have done a BZ test in standard form to see the comparison against the sport tuned. Then fit the bearings in the BZ to compare it to the time you'll set with the modified RZ which would give you an idea of the time the RZ would have set in standard form. If you know what I mean 😄.

Thanks for showing the motor strip down and bearing replacement, very interesting. You said you would post a link to the Happy RC website in the description but I can't see it??

I forgot to do the torque tuned which would have been after the regular stock motor.

Such a fine line between going fast - and NOT destroying the Car!! 😲 I ran a B Zed in my Frog once... DESTROYED my Gearbox!! 😖 Very Torquey Motor! Looked pretty FAST!! 👌😎 Carmine ✈🚂🚙

Great video as always-can we see the crash reel?!

I think for overall balance between speed and performance on 2s the good old sport tuned still seems hard to beat! but yeah its getting faster and faster each motor and more bum squeaky!! That on coming road has me nervous as you try to stop this thing! Try not to cause a pile up with the passing traffic!😬 Great stuff again mate👍

Can’t wait to see the next one. Maybe the 2s battery was sagging a little.

You know there's a TZ model of those to you should look for one.

Crazy!!!! Always fun to watch. Thanks Glen!

I have a tb03r with a front spool and it brakes on a dime!

Nice results, I'm planning to built up my TT-02SR with the TBLM-02s 10.5 turn and TBLE-02s ESC , pinion size I'm not sure yet. A high speed spur gear is also on it's way and a set of foam tires, maybe they will get better results? I'm not ready yet to switch to Lipo, stick to NiMh batteries for now. You sound very English but resides in Canada? Also saw an older movie where you were a little slimmer.. Lol. Well keep them coming those movies. Cheers.

Cold shrinks stuff, heat expands.

great video glen do you think i could get some bearings for my QD Tamiya trail master from happy rc

😎

just removeing the bushing an putting a bearing in the back end of the motor will be like doubleing the motor how smooth it will be to the way it was oh yeah dude

What would be cool if u made some kind of graft or scale with all of the motors down the left side and battery and set up across the top, maybe even the gear ratio on there. then what speed you get from each I think it would give the viewers something physical to see and to be able to see the difference between each

The disparity is because when on 2s the bz does not have the torque to get to full speed. The extra oomph (technical term) of 3s gives it that extra juice

With regards to sliding the bearing in. What if you cut a plastic soda bottle small enough to fit along the inside walls of the motor can? Would that interfere with the magnets? Thanks for the video. They are always good stuff!

I can see many have already said what I was about to say. Well, live and learn:)

I think imma forgot to mention to you Glen that there is a new Tamiya chassis coming out called the tc01.

The method should be: warm the motor can (to make it expand) and freeze the bearings (to make it shrink) once they are fitted the temperature normalises the bearing will stay tight in place… personally wouldn’t warm the resin bell end should push in easily enough if aligned correctly..

Would be interested in seeing the torque tuned and the technigold in this series as well.

is it the stock spur in this one? another good video bud and it sounds like it was smother than the sports tunned. can you get belt tensioners for the belts? it sounds like those belts are wipping around on 3s

Love the vids. Looking at getting an Avante 2011 or Avante Black special any preference as the Black about £80 more. Cheers & stay safe.

Interessant video, thanks for it. Does the bearing kit is the same for all the Tamiya brushed motor? Can you show wich tool you used to go out the bearing from the cage and the haed motor please? Thanks a lot from France!!

So when you get into better magnets the reason why it’s not working as good is they are really made for higher voltage so it’s not that odd that it doesn’t like 2s

A couple of days ago I was looking on the market place one of those local sells group on that Facebook thing. But the thing is was that seller was from another state and nowhere really close to me. I'm in Alabama so idk y it showed on mine but anyways. The seller had at the time over 100 vintage brushed motors. From Tamiya, kyosho to Trinity. All kinds. It looked like big boxes of crayons. Lol. But the prices ranged from $5-$30. So if ur interested I'll try and find it again and try to get the info to u

Awesome car, do you know anyone that has spare spur gear set for the Tamiya road wizard

Would limiting speed trim be helpful with this motor and turn it up when you need speed?

Could you tell me which gear ratio the car was using and if you changed the motor timing:)

I can’t believe that for the price of the Tamiya motors they don’t come with bearings as stock. Watched Adam (RC Action Australia) last night swap out the bushes for bearings. I questioned why it didn’t have bearings and he informed me that no Tamiya motors have bearings! I’m shocked 😱 But watching both your uploads having given me the knowledge on how to swap out those bushes. Do you run your motors in? Do they need running in? Cheers Paul👍🤓🇦🇺

Dose the ESC have “Drag Brake” ? This helps, look into it. Does the Transmitter have “Steering sensitivity” ( Steering Expo ) adjusting this, will also help with high speed runs. The Front Diff will make the biggest difference. We’ll be seeing 100kmh+ pass soon👍🏻😎

Hm got any extra rear diffs in parts ? might be able too mount that in the front so you got decent braking rather then a one way in the front which is more commonly used for drifting setups or when you race on carpet.

You could even heat the can slightly

Hey, I know this is an old video, but have you ever heard of breaking in the brushed motor, while submerged in water?

Hi, have You had any problem with 3S on the tamiya teu 302bk? Grazie

What esc you are using sir glenn? Its fast. Thank you

What is the spur and pinion you are using for these motors? Sorry i missed it.

Is it not just the new bearings that go in the freezer to contract them

Sorry don’t know if I’ve missed it in the videos or just don’t remember. What do you mean by 2s and 3s. Is that to do with different types of speed controller?

The difference wont remain the same in terms of a set mph..... It should however, have a similar difference in terms of percentage.....ie 20% quicker

That's fast in new Zealand. If it's right. We drive 50 kph at stranded road speed. And highway speeds are 100kph so that's almost as fast as that

Very interested to find out that the BZ is touring and RZ is off-road, what about the TZ? Will you be trying one of those too?

Dude, just get a decent 4.5t, 2s with a drive ratio around 3.8 and u'll bring that car to 100km/h^^

why not use a long wooden tooth pick or kebab stick (how you call it in English. In Dutch is saté stok) to put in the center of the bearing and then slide it into the motor housing. No metal (just the bearing) and then press it in with the backside of an Edding marker ?

What esc and size pinion were you using ?

Sport tuned motor describe 9.6v. 3s no problem to long ride?

' bush bearing is a okay and not really good... ball bearing is a great and really good fast smooth running very well

Aren’t you meant to put the bearing in the freezer?

I get 40mph on a silver can and 45mph on a 380 Sports Tuned with stupid gear ratios and 2S.

This motor would prob be better with an offroading setup

Change the ESC braking ability.

Change out the tires to some off road style block tires and you won't spin out any more, They will give you tons of traction!!, I bought some generic ones off Ebay for about 10 dollars and it made my car handle like it was on velcro. Before that, I used slicks and spun out of control like your car did when you try to slow down and break. Then you won't be worried about breaking you car anymore because the new tires give you some much more control. You can stop on a dime! Beware that if you start drifting at high speed with the cheap generic block tires off Ebay, the wheels will break. Oh, and you may need to re-glue the tires when you get them., since the glue they use is a little weak., but other than that, they work great! Click the link below to see the tires I'm talking about. You will be shocked how well they work!!! www.ebay.com/itm/393299427134?_trkparms=aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D20201210111314%26meid%3D39e5fda6209548b4afaae37756288f55%26pid%3D101195%26rk%3D1%26rkt%3D12%26mehot%3Dpf%26sd%3D202654211242%26itm%3D393299427134%26pmt%3D1%26noa%3D0%26pg%3D2047675%26algv%3DSimplAMLv9PairwiseUnbiasedWeb%26brand%3DHPI&_trksid=p2047675.c101195.m1851

Hi mate Can you send me a rc car to me?? Sorry to ask but I don’t have any money to buy one 😔 I am inside house with a big depression and that can help me to go a little outside because I love rc cars 😊😔