Hi, very kind of you to share this. The 20mm would add 2 mm of trail, more stable/ more self centering... 22 would be easier to turn ...less stable. Concentric, means in line on center....
@123PetrolHead Жыл бұрын
Good video Carl, just fitting a set to the bike now. Looking forward to testing them out soon!
@enduro-parts-aus10 ай бұрын
Had no idea about the clamps making that much difference , very interesting !
@ktmcharly1269 Жыл бұрын
Thank you for the informative video in regards of the 6500 montage. Mine will come soon...
@muratersahins3 жыл бұрын
Great video, Carl. Now ı see, why peoples get a special triple clamp. Thanks!
@erikobergg3 жыл бұрын
Nice clamps, i also bought 6500 cartridge, had Öhlins ttx before. Wp valving is better and easyer to service by myself.
@MrNz963 жыл бұрын
You're channel is quite informative and gives in depth info, thank you Can you do a video about what pants and jerseys do you wear?
@dirtbikefun Жыл бұрын
Excellent info thanks Carl.
@zbyh1980 Жыл бұрын
Thank you for making this video, very helpful. I just bought a set of XPlore 6500, and my question my sound stupid.: so there is no need to put oil in the smaller internal chamber (the one which has a top cap)?
@MrPindie3 жыл бұрын
Excellent video. The 6500s seem just like my cone valves but just with a mid valve shim stack instead of the cone. At last, another great WP fork.
@enduroskillstraining3 жыл бұрын
Rode them today. Absolutely amazing. 3 other people rode the bike and said the same. 👍😎
@diygreasemonkey2012 жыл бұрын
@@enduroskillstraining did you revalve the 6500 or went with WP out of the box settings?
@enduroskillstraining2 жыл бұрын
@@diygreasemonkey201 out of the box settings 👍😎
@michail19632 жыл бұрын
Any idea how they compare to Dal Soggio spheres?
@tomasvelecky1812 жыл бұрын
@@michail1963 Hi, I have Dal Soggio a few days and it's amazing. Only now does one know how weak the original WP xplor is. It really only works at low speed. But I have no comparison with the Pro 6500.
@hurelllucieer62253 жыл бұрын
Informative video, thanks.
@michail19632 жыл бұрын
I got xtrig ROCS - do you think the TBR clamps are better compared to ROCS or very similar? The TBRs definitely look mint.
@arronwalton88403 жыл бұрын
Is there going be a follow video up to settings and how they are or was they just set at one setting and not touched again many thanks
@VikVik-je8go2 жыл бұрын
Nice video, and to the preload of spring what are the settings?
@tomasvelecky1812 жыл бұрын
Hallo... can you more explain the behavior of the motorcycle and the offset settings? Have you tried both settings or chosen straight 20mm?
@hugobaert7737 Жыл бұрын
Great video, watched it twice actually. Just rode a friends bike with WP closed cartridge and compared to my stock bike there is just not even a comparison; needless to say I was fast, stable, safe and comfy. I’m going for the works myself too, however instead of the xtrig clamps I`m interested in these bar clamps but can’t seem to find a way to source them? It’s for a gas gas 250 2023 Anyway thanks for the video Cheers
@0cernnunos03 жыл бұрын
Cool. Very informative.
@ultimatebathroomrenovation35943 жыл бұрын
Great video... What did you end up setting your comp / reb clickers at? Did you stick with the recommended setting of 18 rebound / 16 compression? Thanks
@jameskerr92642 жыл бұрын
Can you PLEASE do a video explaining the internals of the WP cone valve fork and how to tune your cone valve fork????
@industry13442 жыл бұрын
Who is the manufacturer of his spring measuring tool?
@niallbowker2123 жыл бұрын
Where can you buy these from and what’s cost cheers
@cuddleman2 жыл бұрын
hi didi you ride xplor pro aer?
@andrewwilson8123 Жыл бұрын
where can i find those clamps?
@enduro24802 жыл бұрын
how much is TBR fork triple clamps?
@dave175a Жыл бұрын
Nice informative vid
@mihaidobrescu74303 жыл бұрын
Hi Carl. Where can you buy this clamps in Europe ?
@enduroskillstraining3 жыл бұрын
I bought these direct from SA, was delivered in 4 days by DHL
@amigosdostrilhosteam3950 Жыл бұрын
Level oil used? 360ml,370ml,380ml
@MikeTapp-mc1hcАй бұрын
Did you go with the 4.0 springs?? Seems light…?
@enduroskillstrainingАй бұрын
I use 4.6 and weigh 90kgs
@grantmotox1232 жыл бұрын
eurotek tbr conversion vs 6500. which do you think is better taking the price difference out of the question. or is one better than the other in certain situations?
@ridingwithtrent2 жыл бұрын
6500 cartrages are a closed carterage system the tbr conversion is still a open cart set up , the 6500s are the best bang for buck
@grantmotox1232 жыл бұрын
@@ridingwithtrent i got the 6500 now. they are epic
@182mcg1 Жыл бұрын
For africa twin 1100 l Long travel fork
@sakariputtonen26833 жыл бұрын
bolts were dry and thus had more than 12nm...
@enduroskillstraining3 жыл бұрын
No, we checked it on 2 seperate triple clamps before recording. Was the same every time.
@robb-smith63282 жыл бұрын
Wouldn’t it being dry cause more friction therefore when torque wrench clicks it actually is less clamp force?
@rogermelling8941 Жыл бұрын
Just gonna nip outside and loosen my fork punch bolts 🔩 jeez stock clamps are rubbish
@jeffdellibovi28452 ай бұрын
Motor oil better
@250txc2 жыл бұрын
TI bolts? lol ... Don't need anything along these lines and I like the $ in my wallet and don't turn loose of it very easily...