Teaquilts: Butler Robitics by Quilt EZ - Doing an Edge to Edge Design - Nesting

Teaquilts: Butler Robitics by Quilt EZ - Doing an Edge to Edge Design - Nesting - Sizing to Fit

Рет қаралды 10,060

4 жыл бұрын

If you're interested in purchasing this system, contact Jon Hawkins at 435 279 4581. Don't forget to tell him that Teajuana sent you! Let me know if you get a system!
Teagear can be purchased from: www.teaquilts.com/products/
Please help me to keep supplying videos without me incurring debt. I love to share all I know about my subject areas; I would really appreciate if you purchase recommended items, that you do so through my affiliate programs listed below. Thank you!
Affliate Programs:
CashApp: $Teaquilts
Accuquilt Affliate: www.shareasale.com/r.cfm?u=148...
Amazon Store Recommendations: www.amazon.com/shop/teaquilts
Arteza USA: arteza.com/?a_aid=teaquilts
Arteza UK: arteza.co.uk/?a_aid=teaquilts
Vista Print: www.vistaprint.com/vp/welcome...
Contact me:
Teajuana Mahone
11001 Dunklin Dr. #38205
St. Louis, MO 63138
e-mail: www.teaquilts @ teaquilts.com (remove spaces when copying)
Please subscribe to my channel and check out my other social media sites:
KZfaq: TeaQuilts
Facebook: Teaquilts
Blog: www.teaquilts.blogspot.com
Website: www.teaquilts.com
Social Bluebook: • Video
Music: www.bensound.com

Пікірлер: 66

@timothyblack2185 2 жыл бұрын

Please, please make more and more videos using the Butler system. I am new to this and need help. There are no good videos on this system from the manufacture. I also didn't receive a booklet of instruction, nor did a tech come to my home for set up. I had to download the instruction booklet and print it off. However, your video was better than the instruction booklet. I appreciated this video very much, Thank you. Tina

@maryyoder8908 3 жыл бұрын

Thank you, thank you. My friend just got her Butler system and we are in the beginning stages of learning. Your instruction is excellent. Will be watching again and again. Mary Y

@teaquilts 3 жыл бұрын

Hi Mary, Good luck to you and your friend on your new Butler journey. I enjoy multi-tasking now!

@ChristineBBD 2 жыл бұрын

Thank you Tea, for making this video. I've been researching which robotics to buy and your video helped me learn more about the Butler.

@teaquilts 2 жыл бұрын

Thank you! If you purchase, let them know I sent you 😉. It lets them know I'm promoting their products.

@bevbartlett1483 3 жыл бұрын

You do the best videos! You make everything so easy to understand, thank you !

@teaquilts 3 жыл бұрын

You're very welcome! Thanks for watching and commenting.

@caryritter2799 28 күн бұрын

you explain it very well. thanks Tea

@beachester629 2 жыл бұрын

Thank you Tea for this video. You really explained a lot about quilting quilts. I don't have a longarm but this video showed me what I need to provide to get my quilts quilted. Very educational video.

@teaquilts 2 жыл бұрын

Thanks so much Bea!

@judyb4559 2 жыл бұрын

I just found your videos. I bought the Butler Robotics some years ago and was thoroughly "lost" in making it work. Your videos are the best!!! Thank you so much.

@teaquilts 2 жыл бұрын

Thank you. I just recorded one for point to point so I hope you subscribed!

@marymurphy5620 4 жыл бұрын

Thank you for the video! I have had my butler for about three years and still had questions about doing b2b that you answered! I am a visual learner and this was very helpful. Thanks! Keep making videos and I will watch to learn more.

@teaquilts 4 жыл бұрын

Glad it was helpful!

@tammyginsel7930 2 жыл бұрын

Thank you soooooooo much for sharing! Just finishing my first quilt with the Butler! Your video have been very very helpful!

@teaquilts 2 жыл бұрын

Awesome! Enjoy your journey.

@etlzjj84 4 жыл бұрын

Thank you for making this video. I have the Butler system and am SLOWLY learning it! You are very thorough. I just took a quilt off today and alternately wanted to drop kick the system or start a new quilt! I've got the nesting sort of down and did a crop on the last pass, which was quite painful! Live and learn...

@teaquilts 4 жыл бұрын

Glad it was helpful! I'll add more videos as I learn techniques. I already have 2 more recorded but they need editing. Thanks so much for watching and commenting.

@donnataylor6513 2 жыл бұрын

I was considering buying the Butler Robot to put on my longarm. Watching your video convinced me I do want to buy the system. Thank you for taking the time to share with us this information. You are a great teacher.

@teaquilts 2 жыл бұрын

If you decide to purchase from Butler, let them know about me. If from sewing machines plus, use my affiliate link please.

@KEarllongJr 6 ай бұрын

Thank you I needed this tutorial

@sarawagner-eversman8302 9 ай бұрын

This is the best explanation I have seen

@teaquilts 9 ай бұрын

Thank you! ❤️

@kaypatterson1378 3 жыл бұрын

Great job. So helpful to show close ups if screen on each step

@teaquilts 3 жыл бұрын

Thanks Kay for watching and commenting.

@wandawalden6265 4 жыл бұрын

Thanks Tea for sharing. Love to see more.

@teaquilts 4 жыл бұрын

More to come!

@joanthorpe8085 Жыл бұрын

Very helpful and educational videos!

@suefliss7210 2 жыл бұрын

Thank you so much for this wonderful and informative video.I am just in the process of deciding which long arm machine to buy (Janome Quilt Pro 18 from a wonderfully supportive dealer 5 min. away) and this video helped me to decide that I will also get this system to add to it. I know that by subscribing to your channel, and watching your videos I will be able to be successful in learning to use this system.

@teaquilts 2 жыл бұрын

If you purchase through Quilt EZ let them know my video helped please. Enjoy your longarm journey.

@KEarllongJr 6 ай бұрын

Thank you I needed this

@teaquilts 5 ай бұрын

My pleasure

@louannatwood1406 3 жыл бұрын

Thank you, Thank you, thank you!!!!! Your video is by far the clearest and most detailed. I plan to watch and absorb your videos! Question though, can you do a sample area on a small mock up area without putting the whole quilt on to check the stitch? Thanks!!!!

@teaquilts 3 жыл бұрын

Glad it was helpful Lou Ann! In regards to your question, I'm assuming your asking about the actual stitching designes, and NOT checking your stitch tension on a scrap, correct? If so, I don't usually have enough room with a bed size quilt to to an actual stitch out with the quilt on the frame. However, you can make a stitch sampler, say the width of fabric by 2 yards and use that to test your panto stitch outs. For me, I made a sampler quilt so I'd know my favorite stitches. Please watch this show and tell video: kzfaq.info/get/bejne/nJdlpaeT1LzFfZs.html

@claudettebettis9463 4 жыл бұрын

Thanks Tea for sharing.

@teaquilts 4 жыл бұрын

My pleasure 😊

@tonipresha7542 28 күн бұрын

Very Knowledgeable

@GrannysSowingRoom 7 ай бұрын

Your videos are so helpful! I have question about putting in the measurements, Do I put in the length of my quilt 78" long or 59" the width of it? Thanks so much!

@EmeLightheartArtisanDesigns Жыл бұрын

Hi, I am setting up the quilt buttler soon. Will see what happens.

@bonitanance6380 4 жыл бұрын

That will be nice to see how you load a quilt onto the longarm

@NolaTheAlamoChiliQueen 4 жыл бұрын

Wow, that's amazing. You are a very thorough teacher. The people at Gammill and Butler should hire you to do teaching vids for their products! I have always worried thst I couldn't adapt to thst much technology, but now I'm thinking maybe I could. Thanks for a great vid!

@NolaTheAlamoChiliQueen 4 жыл бұрын

I just noticed, when the vid showed up in my subscriptions, it shows that it's 1hr 32min, but when I watched it, it ends after 55 minutes.

@teaquilts 4 жыл бұрын

Wow, thank you! My videos are usually longer than needed, but that's because I try to think of every scenario. I want to tell you not only the name of the icon, but how many down from top or up from bottom. Because someone tells you the name once, on a new system, doesn't mean you'll remember it. I don't like to make anyone feel awkward for asking a question I've already answered.

@teaquilts 4 жыл бұрын

Something is off with KZfaq. They added extra minutes to both of my videos I release on Saturday. They are the correct minutes when playing, so I just left it alone.

@sherrybilus3744 3 жыл бұрын

Thank You... It was great..

@teaquilts 3 жыл бұрын

My pleasure. Glad it was helpful Sherry.

@GiGi-si9mo 2 жыл бұрын

I have to log in two or three times just to get the light to turn on. Horrible service. No help for problems. Thank you for your video. Hopefully you have more videos.

@adreanthomas1393 4 жыл бұрын

Thank you so much for making this video! I just purchased my butler and I was so nervous about how I was going to learn to use it...I’m a very visual learner. I have one question, after you finish the nesting do you put the needle (in the up position) back near where the starting position is (the green dot on the screen) and then hit the start button so you can pull up the bobbin thread...or do you start the stitching at the nesting point as your new starting point? I’m sure you probably went over this step and I am just missing it...lol thanks again!

@teaquilts 4 жыл бұрын

Thanks for watching my Butler tutorial and commenting Adrean. After I finish nesting, I just move my machine to approximate position of where I want to start. When I tell it to start stitching (press the green button), the robotics know where to start. I move to the approximate position because it will take less movement of the head to get to that position. No need to be accurate in placement. However, you don't want to have it FAR away from the start position; then, you'd have to wait for it to move a long distance before instructing you to pull up the bobbin thread.

@sheilafredette3243 3 жыл бұрын

Thank you so much,

@teaquilts 3 жыл бұрын

My pleasure! Thanks for watching and commenting.

@timothyblack2185 2 жыл бұрын

Could you please do an updated version of the Butler Robotics System; since you have more experience now with it. Maybe an update one on Nesting and an Advanced one on the different features you have experienced with the Butler. It would be appreciated by us newbies. Thank you

@teaquilts 2 жыл бұрын

See other comment.

@timothyblack2185 2 жыл бұрын

Could you please do an update version of the nesting and using a pattern repeated for the next row video; since you have more experience with the Butler Robotics System now. Also, an Advanced video of the different features on the Butler you have experienced. It would be greatly appreciated by us Newbies to the Butler System. Also, maybe get someone else to film you, so you don't have to keep stopping to full with the camera you can just teach. Thank you

@teaquilts 2 жыл бұрын

Sorry, I don't have anyone willing to help with filming. I do plan to make more videos on Butler though.

@pamelathorne9345 3 жыл бұрын

Great video! Could you please show how to download a pattern from a USB?

@teaquilts 3 жыл бұрын

I'll have to see if I have any I haven't uploaded. It's been a while since I purchase any patterns. I will add a video to my library.

@bonitanance6380 4 жыл бұрын

I noticed the sound of the machine changes as it stitches closer to the bar at the top. It makes me think it's more taut at the top area.

@teaquilts 4 жыл бұрын

That was because when I first start stitching, my leader grips are right under the take up bar. The take up bar has the quilt backing attached and rolls the quilt as I go along.

@Sharon-pb7so 4 жыл бұрын

I loved seeing Mickey Mouse peeking out, that was so cute. Thanked for the interesting demo. How long does it take in real time to do a quilt?

@teaquilts 4 жыл бұрын

That's hard to say as too many factors, even if not computerize stitching. The size of the quilt, the density of the quilting design, the back tacking of some designs, and stitch length. Another factor is the speed of the stitching. It will stitch to whatever speed you set it at. However, I started with 50% and am now using 30%. I find my lines are straighter is I slow it down a bit. Hey, it's stitching so who am I to complain? I'd say 4 hours for average bed size - stitching only. You can easily add another hour for rolling and basting sides (as I float my quilt tops).

@bonitanance6380 4 жыл бұрын

On average how many rows can you quilt before having to load another bobbin?

@teaquilts 4 жыл бұрын

@bonitanance6380 4 жыл бұрын

So what does the mechanism look like as roll the quilt up to another point to quilt?

@teaquilts 4 жыл бұрын

I showed that in the video. On the screen it just states to "Roll the quilt." You do exactly as told. When done, you hit the check mark.

@bonitanance6380 4 жыл бұрын

@@teaquilts in the video a close up of rolling the quilt. Is there a handle on the side that rolls the whole quilt? You were over on the right side of the quilt and the entire quilt rolled.