The Audinate AVIO USB-C Dante adapter is finally shipping! Let's discuss and test the ADP-USBC-AU-2X2 with an Android phone.
Пікірлер: 12
@bcalenda26092 жыл бұрын
This was helpful. I was unaware the Bluetooth AVIO model was 8khz bandwidth. Since iphones are so popular in USA I will need one for the reasons you state. I have a IK Multimedia iRig Pre HD that has a TRS headphone out that i could use with a long Lightning to Micro-USB cable to get higher quality up to 20kHz out from phone but only analog and mono.
@IsraelYarah2 жыл бұрын
Hi thsanlks for your video, quick question: can the AVIO USB-C be connected to an USB audio Interface? have you tried it? I see the Dante introduction video present a Audio Interface connected straight to an interface but there is not much people who try it.
@cwichura2 жыл бұрын
I don't have an interface to try with, but I would not expect it to work. It is a USB client device, not a host (or "OTG") device.
@IsraelYarah2 жыл бұрын
@@cwichura Chech on this video at the 1:23 minute, looks like somehow it should work. kzfaq.info/get/bejne/eqqkYNSJ0pOVo4k.html
@thrivingbeyondyourscars73662 жыл бұрын
Hi I have seen in one of your videos you used a Dante avio connector with your rodecasterpro. Can you please detail what you used exactly as I am looking to do the same.
@cwichura2 жыл бұрын
Initially I used an AVIO two channel analog input. That has XLR connectors. I got a pair of eighteen inch long TRS 1/4inch to XLR cables from Amazon and used those to connect the left and right monitor outs on the R0DECaster Pro to the AVIO. This provides a balanced connection, which helps avoid noise. I later switched from the AVIO to a FocusRite RedNet X2P. That let me put the return mix on the headphones of the X2P and also use the X2P's zero-latency local mix to hear a bit of myself. There is no good way to get the return mix into the RCP, and even if you did, the headphone amps in the RCP are unusably noisy.
@thrivingbeyondyourscars73662 жыл бұрын
Thanks for this.I simply want To get the rodecasterpro on a Dante network so I can route the audio in teams, zoom Riverside.fm etc and I do not have a noisy room like you. I am thinking to perhaps use Dante via or the solution which you provided with the avio adapter. I will try these and see if they work for me. I appreciate your help. At this stage I am debating between these two solutions.
@johnlukas45252 жыл бұрын
Do you know if it’d be possible to power a 2 channel usb C audio interface, such as the SSL 2+, over PoE and put the device on the network?
@cwichura2 жыл бұрын
Power - possibly. Get audio - no. For power, the device needs to implement the USB Power Delivery ("PD") specification and draw less than 7.5 watts. Audio - the AVIO does NOT support USB host mode. So an audio interface, designed to connect to a host computer as a USB client/guest, will not work. The AVIO is only a USB client, itself.
@johnlukas45252 жыл бұрын
Ah. Makes sense. Appreciate it!
@andreasbrandts84206 ай бұрын
Weird sound.. Difficult to listen to you, which makes it boring because of that fade in and fade outs there!??
@cwichura6 ай бұрын
I believe you are referring to the noise gate. It was set too aggressive when this video was made. I have since stopped using noise gates in that manner. That said, I listened to this video again and I don't find the speech hard to understand -- the noise gate doesn't sound like it is clipping off the start or end of words.