Testing the 20 watt Atomstack A20 Pro Laser Engraver and Cutting Machine

Рет қаралды 17,636

Жыл бұрын

The new Atomstack A20 Pro boasts a lot of performance and features including a true 20 watts of output power that can cut through 1/4" plywood in a single pass. Today I'll be reviewing and testing it!
Learn more about the Atomstack A20 Pro -
Original price - $1204.99
Coupon price - $1004.99
Save $200 now! (17% off)
Affiliate link
amzn.to/3JpxXHu
Did you make something after watching this video? If so, I'd love to see it! Please tag me on Instagram @full_steam_designs and Facebook @Full Steam Designs
Free SVG files - fullsteamdesigns.com/maker-re...
___________________________
Tee shirts:
teespring.com/full-steam-desi...
teespring.com/full-steam-desi...
/ fullsteamdesigns
/ full_steam_designs
fullsteamdesigns.com/
If you enjoy my content and would like to show your support on a more personal level, please consider checking me out on Patreon. Thank you!
/ fullsteamdesigns
Or you can buy me a coffee: www.buymeacoffee.com/ChrisPow...
Another great way to help support the channel is through my Amazon store. I get a small kick back from anything purchased. It’s full of products that I use and recommend.
www.amazon.com/shop/chrispowe...
The following links are affiliate links. I get a small kick back from each sale, but you still pay the same great price!
Get Lightburn here: amzn.to/3ipfcss

Пікірлер: 38

@user-xv3oc4jp3w 8 ай бұрын

Great video, helped me make up my mind

@brendaboyce9967 Жыл бұрын

Great video. Lots of information. Thanks!

@ChrisPowellFSD Жыл бұрын

Thank you

@ashleyjones9928 Жыл бұрын

Amazing. Also love all the music in this video. I just purchased the A5 Pro and it’s coming today but after seeing this I’m not going to open it. I’m returning it for this instead.

@ChadsCustomCreations Жыл бұрын

Great video Chris!

@ChrisPowellFSD Жыл бұрын

Thanks Chad 🙏

@andrewoperacz7427 Жыл бұрын

That’s one amazing machine.

@ChrisPowellFSD Жыл бұрын

Definitely

@travisdurham7736 Жыл бұрын

Chris, ordered one from your link and just got it put together. I am new to the laser world, do you have, or know where I can find a chart for power and speed settings for different materials? Kind of like a cheat sheet to get me started?

@annavariumful 10 ай бұрын

HI, thank for your vid. The power scale cutting guide was a godsend! My setting were ALL way too fast. I'm using Lightburn and it's lowest speed setting is still way faster than what you have shown. What software are you using? Cheers

@PennysPorch Жыл бұрын

Thank you. Can you please tell me if I could use it to cut 1/4 inch plywood door hangers that would need a finished size around 17 inch x 23 inch at least. Thanks, again.

@user-uz4kv1hl9k 11 ай бұрын

loved the video. Question: I am having a difficult time looking at the Atomstack A20 Pro and the Burnlab A20 Pro. They look so much alike. When I search Burnlab, Atomstack comes up. Are the basically the same.

@nathanduval7202 Жыл бұрын

Thanks so much for your video Chris! This is perfectly timed for me, I'm actively looking to buy one myself. I've been looking at the Atomstack 30W model that is coming out. I'm not certain if there is a huge advantage of buying a 30W over a 20W. I know it will have a little bit stronger laser, but is it worth the additional cost?!? I know I really need to think about what I'm going to do with it. But not having a laser before I'm not sure. I don't want to buy the 20W and then say, "darn, I wish I had bought the 30W."

@mandieirons9945 Жыл бұрын

advise on settings would be great i have just bought this machine. watched so many you tube, but for the life of me i just cant figure out the cutting, I'm using light burn, but laser is not going right through, i know its me, but advise would be greatly appreciated

@MrJDJJ1 8 ай бұрын

@ChrisPowellFSD Thanks a lot for the video.. Go NAVY. I just purchased this laser, I am just getting started with it. I used lightburn yesterday with the materials test. I am not sure if that is really going to provide the level or what I need as Test cards. Do you have any suggestions to what I might do in this regard? Thanks a ton!

@MarcoPagliarani 9 ай бұрын

Hi, thank for your video. Are the A20 PRO, A20 PRO and S20 PRO models equivalent, thanks?

@natalievaldez2933 Жыл бұрын

How did you add a picture onto it? Step by step please

@xuanoanh 6 ай бұрын

Can it engrave on round surface?

@stockbatch4109 Жыл бұрын

Which Laser can Engrave Zinc Alloy with Electroplated Coating on a Budget?

@mirceacluj 9 ай бұрын

for PCB ist good?

@olgatorres4154 Жыл бұрын

Fantastic video!! I really want one , but does it have an accessory you can purchase to engrave tumblers? Any info Is greatly appreciated.

@shanciehardy5909 Жыл бұрын

Yes, you can buy that separately. I have one and love mine!

@burtgraham3689 5 ай бұрын

did you happen to build an enclosure for it.

@selwynadelson 11 ай бұрын

My machine does not automatically home on start up. Im an absolute beginner - please help

@user-sn5ix4dd3n 7 ай бұрын

bonjour je n'arrive pas coupé correctement avec ma machine a 100% et 250 vitesse 3 passage il me ne coupe pas 5 mm quel vitesse et combien passe vous avez coupé l'étoile

@stresseddad1615 28 күн бұрын

Has anyone used this model for making rubber stamps? I have the P7 M40 and it struggles and is sooooo slow so I am thinking this model might be the right one for the job!

@user-sn5ix4dd3n 7 ай бұрын

bonsoir . vous avez coupé métal quel métal quel épaisseur quel vitesse combines passages

@lighthousefabrication4856 Жыл бұрын

Chris, would you choose this over an xtool pro 20w? Thanks

@ChrisPowellFSD Жыл бұрын

The xTool just feels a little more refined. Plus, now they offer a 40 watt upgrade. They’re also really involved in the community. I’d probably go with the xTool.

@lighthousefabrication4856 Жыл бұрын

@@ChrisPowellFSD I’m sorry Chris, wrong video I meant the Atezr p20 vs the xtool 20w Thanks again

@dannoc1070 11 ай бұрын

Hi. Are these made in China ? if so with the warranty does the machine have to be repaired there aswel or do they have a UK base.? Thanks anyone for a reply 😁😊!!!

@jeremyspecce Жыл бұрын

Must be great to finally get your hands on a laser 😂. But seriously, as someone who has had stuff cut but never used one myself, where you said “cuts dark colored acrylic”, I’m not clear if dark colored acrylic is easier or harder to cut than light colored or clear acrylic. So does that mean dark is the ONLY acrylic it can cut or does that mean that it can also cut any other color (or clear) as well?

@ChrisPowellFSD Жыл бұрын

Haha. Yea dark solid colors are the only thing it will cut. You need a co2 laser to cut anything transparent or light color.

@jeremyspecce Жыл бұрын

Thanks, that is the kind of thing I would never have even considered to be an issue, probably until I got a machine that wouldn’t do what I wanted!

@dwwoodbuilds Жыл бұрын

@@jeremyspecce Glad you asked this Jeremy!!

@NickIlasi Жыл бұрын

It will cut any color as long as you paint it with black water-based paint first.

@chlordk 5 ай бұрын

06:24 Would you trust another mans laser cuttet dice? If not perfectly in balance it would tend to fall mostly on one specific side. Only the owner know which side it is.