The BEST Method to Change Motor Oil in Your Honda ADV150

Рет қаралды 8,865

Күн бұрын

NOTE ::: New oils recommended by HONDA since this video was produced:
prohondaoils.com/products/#4-...
HOW TO change engine oil in the Honda ADV 150. I recommend this method over draining the engine oil from the filter/screen side as shown in video (M1) METHOD #1.
NOTE #2 --- In the original video there was a miscue for the amount of oil needed for the engine. It is 0.8L as I made an error describing it as .08L so that part of the video was trimmed out to avoid confusion. As a result, the video doesn't flow smoothly around the measuring cup discussion, but you get the idea.
The amount of engine oil required is around 27.1oz (use the measuring cup) and be sure to check the dipstick until the oil is centered between the dipstick indicator marks. This is challenging to get perfect. It's okay if it's slightly off. These Honda engines can deal with it. Just don't overfill to an extreme level. If you do, drain some out and remeasure.
Check out my other video on (M1) Method #1 to compare the two. Products used in the video can be found at the TREK SHOP 👇
► TREK SHOP (Gear I Use)
www.amazon.com/shop/trekopolis
► Support TREKOPOLIS (Donations - Wish List)
www.amazon.com/hz/wishlist/ls...
⏰CHAPTERS⏰
0:00 How To Change Oil - Honda ADV150
0:59 Items Needed to Change Oil
1:15 Oil Drain Process (M1)
3:11 Cleaning Oil Filter/Screen
3:38 GOLD PLUG - Oil Drain Plug 17mm
4:41 Adding New Engine Oil
----------------------------------------------------------
Music from Uppbeat (free for Creators!):
uppbeat.io/t/all-good-folks/m...
License code: F4EYEOJ40UZEREYS
----------------------------------------------------------
Music: www.bensound.com
*As an Amazon Influencer I earn from qualifying purchases.
#motovlog #motorcycle #adventure #scooter #hondaadv150

Пікірлер: 69

@Trekopolis 2 жыл бұрын

Method #1 (M1) is what I'd recommend when changing engine oil. If you watch my video on Method #2 (M2) I show how to drain the oil from the Filter/Screen side. With the (M1) method it makes more sense and the oil drain plug sits lower on the engine and you don't have a mess removing the Filter/Screen. I've seen countless videos of doing it both ways, so hopefully this helps!

@catfish24 Жыл бұрын

Oh yes you do have to drain the oil screen side if you want to get all the oil out just draing the oil from the oil drain plug does not get all the oil out there in still some oil where the oil screen is.

@Trekopolis Жыл бұрын

@@catfish24 Yep, that's why I show both examples. I've found that too. Thanks!

@Captain_Deadstick Жыл бұрын

Thanks for the video just changed my oil for the first time on my ADV also got the gold plug. Love to see more of these. It really helps.

@Trekopolis Жыл бұрын

It's nice taking care of things ourselves and saving labor expenses. Especially easier things. Hopefully you enjoyed the process! 👍🏼

@BradinManheim 2 жыл бұрын

Just a couple items. The oil you recommended is not what Honda engineers recommend in the manual or service manual. They recommend 10w30 JASO MB rated oil. Your oil is MA rated, which is for motorcycles that share engine oil and clutch/transmission. It has additional friction elements added to stop clutch slippage. Since our scooters have a CVT transmission, they do not need the additional friction. It will negatively affect gas mileage compared to MB, which is for dry transmission scooters.. Next, the amount needed is 0.8L, not 0.08L as you state. Inspection of the video shows you measured almost 0.9L, which is overfull. The manual states the oil filter screen only needs to be cleaned every other oil change, or 8,000 miles. However, it is so easy, why not?

@Trekopolis 2 жыл бұрын

Thanks for the update. Yes, I had a digit off with the zero. I'll make a note on the video or in the pinned comment. I knew my oil was a little liberal, but I drained some and corrected it. Regarding the oil, it's what my dealer has always recommended so just going by that. I'll be sure to ask them next time I'm in there to get their input.

@Julio-bc7pj 2 жыл бұрын

shoot, i believe i got the MA version as well by pure mistake. Would it mess up my ADV150 real bad? what could be the side effects? i'm guessing i need to dump that oil asap and buy the MB rated version. Thx for your comment above, that was a great point 😊

@Julio-bc7pj 2 жыл бұрын

i looked all over for MB rated and couldn't find it anywhere. Only MA, if you know or have a place or maybe a different brand please share with us. Thx

@Trekopolis 2 жыл бұрын

I doubt the MA type oil will harm anything, especially if my dealer is recommending it to everyone for these bikes. I'll call them today to get their input, but I've ran my bike on it for two years. I'll circle back on this later to update everyone, no worries.

@Julio-bc7pj 2 жыл бұрын

@@Trekopolis Thx man, well I also found a KZfaq video explaining that it’s ok to use MA on a MB scooter but should never use MB on a MA or motorcycle

@MrFifth-up9jz Жыл бұрын

Best one yet

@Trekopolis Жыл бұрын

Thank you! ✌️

@Julio-bc7pj 2 жыл бұрын

thx for the video and your amazon link, i ordered the magnetic bolt from it.

@Trekopolis 2 жыл бұрын

Cool, thanks! It's a very good quality product.

@go5582 Жыл бұрын

Great video

@Trekopolis Жыл бұрын

🙏🏻✌🏻

@Jeremybaland 15 күн бұрын

Great video but the oil pictured is the wrong oil for this scooter. The Honda GN4 is for motorcycles with a wet clutch. The Honda scooters should run on oil with molly (GN4M). Molly is a friction modifier and will help prolong engine life. Scooters have a dry clutch. Being this video is older im sure you have figured all this out by now. Thanks for taking the time to share this.

@Trekopolis 15 күн бұрын

This was a question when the video came out and according to the Honda dealership, that oil is what they use at the factory. They came out with a synthetic now. It was confusing for sure and I've switched to another brand.

@MrFifth-up9jz Жыл бұрын

Thanks!

@Trekopolis Жыл бұрын

I really appreciate that Mr. Fifth! :)

@gswaugh Жыл бұрын

I've seen a friend use a sheet of tinfoil to keep on the center stand and direct the oil into the pan. Appreciate the video.

@Trekopolis Жыл бұрын

Whatever works! Good tip!

@dinabas6654 2 жыл бұрын

Good day sir.. nice vid content.. in my place, CVT service cleaning can be performed on every 2 services once (every 2k km oil change), meaning second service, fourth service, sixth service and so on. Also using 10w30 MB... . mineral oil 0.8ltr. and oil drain plug with copper washer... . Thanks regards

@Trekopolis 2 жыл бұрын

Thanks for the information!

@toms6841 Жыл бұрын

Where did you find 10w-30 MB motor oil?

@Lincolnator721 Жыл бұрын

Thank you. Already need to change the oil. The miles add up fast when you're saving on gas 😂

@Trekopolis Жыл бұрын

Welcome! Oil changes are fun. 😉

@Lincolnator721 Жыл бұрын

@@Trekopolis just noticed the gold bolt is out of stock. I wonder when they will restock it

@Trekopolis Жыл бұрын

@@Lincolnator721 Bummer. Hopefully soon! It's a popular item.

@Lincolnator721 Жыл бұрын

@@Trekopolis Just received it 2 days ago. Got 1k mikes on the scooter now.

@CopyWhoTV 2 жыл бұрын

Not bad at all. I will certainly update my approach to my next oil change based upon this video. I will drain directly from the bottom, and I will get one of those magnetized caps you are using. This made me realized that I didn't clean my filter when I did it. I drained from the filter side, and when it was done running out, I tipped the bike some to get more oil to drip out. Another thing, I didn't run the engine before doing the change. What purpose does that serve? Maybe to warm up the oil so more comes out during the drain? I'm curious. Good video.

@Trekopolis 2 жыл бұрын

You got it. The warmer/hotter the engine oil the better flow you achieve. I usually ride mine before an oil change, but since I just did one for the other video I figured it wouldn't matter. Now my oil should be super clean! Two oil changes in a week. But, It's cheap enough to demonstrate the process. Thanks!

@go5582 2 жыл бұрын

Nice horns.

@royromero8496 2 жыл бұрын

Has any one out there used honda 10 w40 blended oil with moly in their own adv 150 ? This is a HIGH PERFORMANCE MOTORCYCLE OIL !

@Trekopolis Жыл бұрын

Dealer says don't use Moly in the engine, but hard to know since I am still waiting on my Service Manual. :( I learn most things by either doing it myself and watching other videos like everyone else does.

@go5582 2 жыл бұрын

Hi handsome great video. I have a 2022 adv150 with 810 miles. I picked it up March 27 2022. The dealership recommends using oil for both engine and rear axle. What are your thoughts about that?

@Trekopolis 2 жыл бұрын

There's a discussion about this under the Community Tab on my channel. Check it out!

@boyanboyanov5320 2 жыл бұрын

Hello, really nice video about oil change! Thanks a lot for sharing this. I can't find Amazon link for magnet bolt..

@Trekopolis 2 жыл бұрын

Thanks for the comment! Below my videos is a link to the Shop Trekopolis where I have various items I use under lists. There's one for the ADV 150 where that magnetic screw should be under. If you can't find it let me know!

@boyanboyanov5320 2 жыл бұрын

Thank you! I will check it now !

@Trekopolis 2 жыл бұрын

@@boyanboyanov5320 amzn.to/3NF8Hwc

@boyanboyanov5320 2 жыл бұрын

Thanks a lot ! Today I bought my adv 150!!

@Trekopolis 2 жыл бұрын

@@boyanboyanov5320 I bet it's Red! 😁 Congrats! You'll enjoy it.

@ethanasher3393 Жыл бұрын

Great video thank you! My only question is how do I know exactly which gold plug to get for my 2023 Honda adv150? I'm about to change the oil for the first time and figured I'd get one for it but I'm not sure which to get

@Trekopolis Жыл бұрын

amzn.to/3KmgznK

@Trekopolis Жыл бұрын

Here's the one I purchased...

@ethanasher3393 Жыл бұрын

@@Trekopolis thank you!

@aaronramsonwhite Ай бұрын

Can you please tell me where the oil filter is? It’s not in the service manual, and I can’t find any conclusive documentation online. Thank you!

@Trekopolis Ай бұрын

It's that metal foil looking thing with the spring behind it on the left side of the bike, that larger bolt. In one of my videos I show all that and how to remove, clean it, etc. Thanks for the comment! kzfaq.info/get/bejne/f76ehMJ6v6jOlqM.htmlsi=0jckZjkw4zxiR-0o

@jatoav8or Жыл бұрын

Question, isn’t Pro Honda GN4 motor oil certified JASO MA for applications with wet clutches? My ADV manual specifies certified type MB. Wouldn’t Pro Honda HP4M be the correct fill according to the manufacturer?

@Trekopolis Жыл бұрын

My dealer said they come from the factory with GN4 in them. I agree it's confusing. I'm switching to their newer synthetic next time. Think it's in a red bottle.

@Danny-fc2je 2 жыл бұрын

How often do we have to change the oil?

@Trekopolis 2 жыл бұрын

At first 600 miles after break-in period, then manual states every 4k afterwards. I do mine annually because it's very inexpensive and easy to do. But, that's just me.

@mmaides Жыл бұрын

What torque for the bolts?

@Trekopolis Жыл бұрын

Think I read oil drain bolt is roughly 18 ft-lbs, but I've never used a torque wrench on any oil change on my vehicles. As long as you don't overtighten you're good. A good measure is once the flush part of the bolt meets the metal tighten just enough to apply some pressure to lock in the seal, but not much more. It's a feel thing usually. 👍

@mmaides Жыл бұрын

Thank you. And I am trying to buy washer to go with that plug, what size is the washer? The plug description doesn't give me specs but I don't want to buy 50 of the wrong thing

@Trekopolis Жыл бұрын

@@mmaides The washer comes with the plug.

@jaysgarage4623 Жыл бұрын

Oil drain plug 18 ft/lbs. Screen oil plug 15 ft/lbs. Gear oil plug 17 ft/lbs.

@toms6841 Жыл бұрын

@@jaysgarage4623 I'm just amazed how many people refuse to read their owner's manuals. :(