How were/are they?

@@a0zuniverse okay, these skates are everything as advertised. But to make them even more fun, I put 76mm on the front and back and left the 80mm in the middle. I love a fast turning skate. They are probably my most comfortable skate that you could wear for an all day city skate. They are just like wearing slippers, but with a lot of support. But to be honest I love the Aeon 60 Lomax skate even more. The skinny boy liner is awesome. I love the little wheels. Get you so low to the ground it’s insane. If you’re into or want to get into aggressive skating you can’t beat the 60. The H block is much bigger for grinding and that makes it easier for beginners. You don’t notice the skate being slower because of the little wheels. It’s my go to skate now. But these Aeon skates are flat when you get them and the new wheels are sticky. So same thing on the Lomax skate I put 60mm front and back and left the 61mm in the middle. Now I can turn like an ice skate. Get the pro version instead of the standard. The upgraded liner is so worth it. I’ll stick to learning grinds on the 60’s for now. I’ll try the 80’s at grinding when I get better at it. If you want a fast skate for street skating and the occasional grind or slide you can’t beat the 80. For aggressive skating in a park I’d get the 60’s. Hope this helps

Yeah, I'm glad I decided to get back 6 months ago

There'll be a heap of low mileage skates on the used market in 3-4 months ;)

Takeshi is next level!

that is bad.... I came here from the Loco site. After reading your remark, will not shop there. Too bad.

tengo el mismo problema. Dolor intenso en el tobillo derecho externo.

The usd aeon 72mm are my favorite skates out of all the skates I own. I use the usd aeons for commuting. I can skate for hours without having any inner ankle pain or any other discomfort. So not everyone has these issues. I would suggest something like the seba/FR fr1 or the rb 80 da/cruiser these are very wide in ankle area and toebox area.

Anthony Peck Thanks! The urethane on the go wheels is more premium than the stock wheels. I like the shock dampening qualities of the Go wheels

Loco Skates are brilliant and Id highly recommend them for when youve got questions and want quality product. Guys shipped a pair for me to ireland few years back after i send dozens of questions beforehand asking them which ones will be most suitable for me so definitelly theyre worth getting in contact with to see what will work the best for you

I got the 72s because of a similar impulse lmao

Darvin Mckinney There’s no 80mm frame with an h block, but this is most similar: www.locoskates.com/products/kizer-advance-powerblade-frames-black

Yep. Ennui Neoprene ankle-savers. They’re padded on the ankles. Also, when you heat mold your liners make sure that you put on the compression sock over the warm boot.

Flat heel... but the stock liner will have a heel-wedge shock absorber which is detachable :-)

How abot Ground Control HD or nn skates Dragon?

true to size id say

Go to locoskates.com and search for "go project 80mm". I've not heard of anyone de-coring go projects, they're a great quality wheel.

@@stevie-c1471 thank you so much!!!

Peace Bill Stoppard just did a video where he rides these skates on rough street pavement and he said they worked prefectly

41/42

Exactly! Imagine this unibody shell idea but in carbon. Could be the best skate ever made for real.

I literally searched for a week for a pair in size 12. No luck!

Update: Apparently they will restock 12s in the mid of August

@@_muzg_ Thanks for the heads up. I just don't know why there isn't size 12's. Most people I know don't have feet that big lol

@@_muzg_ Did they restock the 80s in the end? I've been keeping my eyes peeled.

@@chilli-iceolive-abode2447 check out this link and contact with them www.locoskates.com/pages/cant-see-your-size

same here

@@Mk-oj3ee these are gonna be my next ones too

That's what I wana kno if it locks and slides good

Banzai Ho Try again in 1 week! I think more just arrived at the USD warehouse so we should have them soon

@@LocoSkates any chance of you guys getting size 13 or 14s. I wanna learn as soon as I can.

thanx Loco skate , just got a pair in my size after a year of waiting and they are awesome 👍.

with the 72s ur in the middle like me. and i say do it if ur going for longer rides, but if u are aggressive skating more then i say stick with the 72s. cause u do get the bigger wheels to hit on sides more, but they are crazy fun tho for speed runs.

@@thearianmandalorian I'd like to get ones with 72, are they good for ride? I'm more into jumping and riding with sharp turns than grinding, tho I'd like to have grind option as well

@@fosterix555 they are more then perfect, ive been on just about every ramp, rail and jump etc. for the past two months and they have been perfect for all of it. there is a getting use to the insane speed u can get. but maaan its fun! takin rails in high speeds are craaaazy fun with them.

@@thearianmandalorian ty for reply dude! Should i go for 72 or 80 in your opinion? And also, can i heat mold them to make them a bit longer? I have Roces element 52, they are 45-46 eu, but oddly my feet fit in nicely, even tho they're 30.5 cm long, but who knows if Aeons would be like that...

@@fosterix555 always mate, always ready to help out. and if ur in the street skating, but also love to just joyride then the 72 are gold! the 80s are more of a joyride boot, with the possibility of grinding. and im the in between 60 and 80, ive skated since the early 90s and the 72 is like the most perfect boot ive ever owned. they are perfect for it all- and i did indeed heat mold them a small bit, but mostly the inliner. cause i wasint to sure about the boot being able to handle it. point of my long message is i recommend the 72s all day long. ;)

That pretty much exists! :-) www.locoskates.com/products/usd-aeon-xxi-skates?_pos=1&_psq=aeon+72&_ss=e&_v=1.0

Hmm - it will depend on how each user turns (because the frames can hit the floor when turnng). I probably wouldnt go below a 72mm to be safe.

Onno Kaell No it’s dual size anyway and the 41-42 works fine for me. I’d never downsize in Aeons, they are already slim and light.

@@LocoSkates - thank you so much for the quick answer!

Eastbourne

I’m almost positive the max for the 72mm shell is 72mm. The 60 has a 61mm max, and I believe the 80 is 80mm.

If grinds is top of your list then avoid these and buy the Aeon 60. They're great for hitting the odd obstacle, but you wouldn't want to session a rail on them!

@@LocoSkates Of course you would never want these for just grinderblading, but how are they for powerblading, aka mixing a few grinds into freeskating?

Same here. All my sneakers are 30,5 cm. Do you test it?

@@piperdk8849 i got em few months ago, i when i put them on, they were small (liners). But i put them in the oven on 90C for like 10 mins, just as they say you should do it, and they fit really nice! It will mold to your feet. You'll might have to do it 2-3 times, or maybe just once if you ride a lot, so they'll just stay in your form. The blades are amazing!

@@fosterix555 thank you for your fast reply. In Germany we say "you take my fear away" 😁 i hope it will fit. I will let you know...

@@piperdk8849 fingers crossed my dude 😊 just search for myfit liners moulding for the guide

@@fosterix555 they don't fit. The length is ok but its soooo slim inside.... after 5 min my feets hurts like hell. 😔 the USD AEON 80 was my last hope, I try Rollerblade Twister Edge X (pressure at feet,) FR FR1 ( absolutely nervous no safe stand) K2 Uptown ( quality 👎🏻) and the Aeon 80. And now I have no glue which skates I can try. Any ideas?

grindhouse eu still has them listed

@@Xsifilad yeah, not my size though.. i need 47, 48... Thanks for the headsup eitherway!

they have them here but they're from oz, overpriced, silly p&p and doesn't include import VAT, but depends how much you want them. outerlimitz.com/usd-aeon-80-inline-skates/

@@joshyooare5222 yeah also still not my size.. thx though

Hey Rainer. Because Coronavirus! Check out the banner on our homepage right now. We have a live feed of incoming stock / sizes we are able to get hold of amid the pandemic.

😰🕵🕵 smh!! Im sorry I keep forgetting about this Plandemic situation. Thank you for the prompt reply!!!

¿A fastslide in a ledge? mmm...

I have the 80s and learned to royal on them. It's hard at first but it actually makes your royal better and more correct over all. You got to train a more correct C shape with the body and really trust putting the boot down. It's a really fun experience! I haven't tried Unity or Savannah yet. I don't really do savannahs though lol.

Hey Tyler, what number are they? If you are interested in selling Im in.

@@samuelamaral7989 Number being size? mine are 41-42 EU.

Exactly my size. Are you interested in selling? Which country do you live?

@@samuelamaral7989 I would definitely consider selling if I don't lose an arm and a leg on them haha. Canada you?