The "Glock Killer" will be a Glock Clone

Рет қаралды 105,555

Күн бұрын

If anything can knock Glock off its perch it will be a Glock made by a different company with better stuff on it.
Check out Venture Surplus and use the code HOPLOPFHEIL to get 10% off your order:
www.venturesurplus.com/
Support this channel on SubscribeStar for more:
www.subscribestar.com/hoplopf...

Пікірлер: 1 200

@KalashmanNC 2 ай бұрын

7:34 sooooooo, Glock actually has many direct milled slides. They’re all agency order only though. My last agency we had “MOS5” G45s. That’s the RMR direct MOS model.

@Hoplopfheil 2 ай бұрын

I bet they don't want to release them publicly because it would be admitting the MOS system sucks.

@KalashmanNC 2 ай бұрын

@@Hoplopfheil to be honest the direct milled from the factory kinda sucked too. There was a lot of space between the optic and the slide. Both front and back.

@TerranPlanetaryDefenseForce 2 ай бұрын

@@Hoplopfheil i want a Gen 5 G34 I really don't want the MOS

@jlee7811 2 ай бұрын

@@TerranPlanetaryDefenseForcethis guy gets it

@idrankthebleach 2 ай бұрын

@@TerranPlanetaryDefenseForce I did a gen5 g34 mos right when the holosun scs came out and used really bright low profile xs sights. It's honestly great and it's own thing, but yes- i would have preferred to have it milled for a 509t or an acro. That shit is so damn sweet.

@tjreed1419 2 ай бұрын

Bro missed the opportunity to say to continue our journey "glockwise"

@BlueLoneWolf54 2 ай бұрын

boo

@plmkoo6772 2 ай бұрын

boo

@Hoplopfheil 2 ай бұрын

boo

@tjreed1419 2 ай бұрын

boo

@raM3.54 2 ай бұрын

boo

@coppertone3293 2 ай бұрын

Glock and ball (ammo) torture

@MRsolidcolor 2 ай бұрын

by torure you mean 200 down and 200 to go?

@areyoutheregoditsmedave Ай бұрын

nice

@BallisticAviation 2 ай бұрын

9:35 based USPS small flat rate box enjoyer

@CasanovaFrankestein 2 ай бұрын

A box too small to sleep in is still capable of emotional support.

@chipsterb4946 Ай бұрын

The cat is what generated my thumbs up 😃

@Scrap_Goblin 2 ай бұрын

The glock killer is going to be glock not doing what people actually want

@sinisterthoughts2896 2 ай бұрын

Bingo. The biggest threat to glock is their inability/unwillingness to innovate or listen to the market.

@jki808 2 ай бұрын

The moment they put out a pistol that shares the same traits as the 365 macro, it’s game over. Slimmer, more bullets, grip angle. That’s it. If they do that it’s over for the competition.

@Bighomiezombo 2 ай бұрын

If the Gen 5 didnt have those stupid ass front serrations Id have one in every caliber

@UMADBRO64 2 ай бұрын

@@jki808 Not going to happen, and most likely not. Glock's longstanding advantage has always been the early adoption factor. Sig in the case of the 320 and 365, have the same advantage thanks to the P250 making them one of the original investors into the modular pistol concept. This is extremely important because it is the steel frame insert that allows the P365 be so compelling. Glock on the flip side, doesn't have that experience or tooling to develop something that would only hurt their sales of compact and subcompact pistols.

@blackout.ghost718 2 ай бұрын

@@jki808nah 😊

@gavinmullet688 2 ай бұрын

Obligatory Socko at 9:35

@AndyCigars 2 ай бұрын

Socko's methods must not be questioned.

@mr_moose2610 2 ай бұрын

Don’t forget about the ultimate Glock killer…. The Glong…

@aaa3d473 2 ай бұрын

A man of culture

@sinisterthoughts2896 2 ай бұрын

And it comes with a banger theme song.

@ILLUMINATED-1 2 ай бұрын

It has features the drones at glock REFUSE to add

@rustwins4442 2 ай бұрын

Now I'm going to have to listen to that song lol

@earhornjones 2 ай бұрын

If the stupidest thing that your cat has ever done is try to fit in a too small box, you have an extraordinarily smart cat.

@HWG-wm8ld 2 ай бұрын

Mine doesn’t care about boxes, which is odd. I know my moms was nuts about getting in them asap.

@Hoplopfheil 2 ай бұрын

Well he's burned his head on a hot car exhaust a few times but that's an honest mistake. The box thing is just downright stupid.

@Kryogenikz15 2 ай бұрын

@@HWG-wm8ld The old adage "If I fits, I sits" really applies to some cats. My one cat sat in everything she could. Absolutely loved boxes. Our other cat was like yours though; could not give a rip about fitting in odd shaped places.

@basedWisco715 2 ай бұрын

The problems with every Glock clone are the exact same things: 1. They’re ugly 2. They’re over-tacticooled out 3. They’re all named something extremely cringe like ALPHA WOLF DARKNESS BIG KNIFE 9000 (or something like that)

@iCookCrystalMeth 2 ай бұрын

So nothing to do with actual functionality? Fine by me

@ianscott9396 2 ай бұрын

This is really a cat video interrupted by gun content

@fthirtyfivemr 2 ай бұрын

I didn’t realize I had already been moving on from Glock to Glock clones before I watched this video. Like I haven’t thought about buying an actual Glock in a while, but rather clones. Markets change and companies have to adapt or die.

@DanforthDesigns 2 ай бұрын

The fact that massive companies don't get this is hilarious. They are so hardheaded and eventually they learn the hard way and it starts to hit them in the wallets.

@KemikaaliNisti 2 ай бұрын

2:08 those cuffs are good if you dont want ticks crawling up your legs

@gr6373 2 ай бұрын

Those are some of the best things about the pants

@dogevanzandt2889 2 ай бұрын

Hop is deranged

@stevemc6010 2 ай бұрын

Hop's neverserved-isms subtly revealed...

@Hoplopfheil 2 ай бұрын

You really don't want to rely on that to keep ticks away.

@dogevanzandt2889 2 ай бұрын

@@Hoplopfheil my Brother in Christ the drawstrings are literally there to keep insects, leeches and other filth from crawling up your legs by tightening them around your ankles and tucking the pant legs into your boots. Gaiters add to the efficacy.

@mattpsa 2 ай бұрын

Thanks for showing the Dagger some love. 💪

@masonmellinger5304 2 ай бұрын

Wait a min, you really the cust. service rep for PSA?

@mattpsa 2 ай бұрын

@@masonmellinger5304 I wear many hats 😉

@iCookCrystalMeth 2 ай бұрын

whaddup bull

@LetsgoBrandon2023 2 ай бұрын

@@masonmellinger5304he is

@HWG-wm8ld 2 ай бұрын

Build back better hat? HahA

@abtcup 2 ай бұрын

"If it fits...I sits" - cat

@FasutonemuMyoji 2 ай бұрын

"Y U no fit, dumb@$$" - hop

@SauerkrautIsGood 2 ай бұрын

The most compelling glock clone is the CZ-P10. Similar form factor, similar operating mechanism & disassembley, similar reliability, slightly less expensive.

@JNOSNOW 2 ай бұрын

The P10 has a lot stronger action and barrel comparatively. I have a C and an F both optics ready I got for $400 each. Been using them in 2 gun and they're great.

@oskar6661 2 ай бұрын

Not a Glock "clone" though, unless you just figure all striker-fired polymer guns are clones.

@SauerkrautIsGood 2 ай бұрын

@@oskar6661 I guess I meant glock "killer", as cringe as I consider that term to be

@Beltalowda88 2 ай бұрын

@@oskar6661 I bought a gen 5 19 after I had my P10C and use the same holsters I just haven’t bought one for my Glock yet.

@brianc0019 2 ай бұрын

Correct 👍🏾

@50shadesofFDE 2 ай бұрын

Nailed it on the shadow systems MR920. There’s a lot of variance in trigger quality

@kaiudall2583 Ай бұрын

I’m getting rid of my MR920. I shoot my Glock 19 MOS with performance trigger better. Makes me so sad. Wanted to love the MR920. The MR920 has been picky with ammo, having failures to cycle, and light primer strikes.

@eastcoastcracka 2 ай бұрын

Overjoyed that the APX was mentioned. It's such an underrated gun. Surprised the the AREX delta line was left out though.

@cyrusfreeman9972 2 ай бұрын

I am a Glock guy except when I'm a Beretta guy. The Arex Delta is one of few striker guns I would even consider over a Glock. The APX is a good deal but it's yet another SAO striker gun, so I say no thanks

@calholli 2 ай бұрын

APX A1 ... to be precise

@JackTagar 2 ай бұрын

AREX Delta gang!

@JetorgXIII 2 ай бұрын

One day there will be a pistol operating mechanism that will compete against the Glock and win. Until then, everything is either a Glock clone or something built in the shadow of Glock itself. Maybe the rotating barrel operated pistols will make a comeback. ¯\_(ツ)_/¯ Socko searching for non-Euclidean geometry in that box and half-falling asleep was cute. XD

@sinisterthoughts2896 2 ай бұрын

The operating mechanism isn't special to glock, it's just a browning tilting bolt with whites locking on the chamber concept. Super vanilla. Both concepts are well over a century old, and widely used.

@blackout.ghost718 2 ай бұрын

Nah

@SCH292 2 ай бұрын

I notice that when come to pistol design "these other companies" will base, copy, clone or take inspiration from Glock. Nothing wrong basing, copy, take inspiration or clone from another. Now when come to the big boys like Ruger, Sig, CZ, S&W or even something like Taurus they don't really do what "these other companies do". They crank out their own. Oh yeah toss in S&W Sigma joke. I also notice when come to "Glock killer videos on YT" are usually smaller channels or decent sized channels but most of us don't even know these exist till YT spam it to us.

@stevem4783 2 ай бұрын

@@sinisterthoughts2896 guns really don't modernize much. A very minor change is treated like huge innovation. Most gun technology is decades on decades old. Pretty much because you need them to be reliable, so, if it ain't broke and it still does the job, don't fix it.

@onpsxmember 2 ай бұрын

@@sinisterthoughts2896 Kudos for the white's nod.

@AS-mt4co 2 ай бұрын

Not impressed with the acro offering. Glock needs to offer direct milled slides for multiple patterns. And do whatever redesign of the slide is needed to make it happen. Cute kitty 🥹

@Token_Black_Guy 2 ай бұрын

Just buy an aftermarket slide

@civicsr2cool 2 ай бұрын

Glock does offer direct mill to every sight, they just don’t offer it to civilians. They are MOS 1-8 or something like that.

@RandomGuyOnTarget 2 ай бұрын

Well that and put their enhanced trigger in their guns stock

@austinboston5643 2 ай бұрын

This may sound dumb but they should offer em for gen 3's and so on.

@RandomGuyOnTarget 2 ай бұрын

@@austinboston5643 Nonsense! This is the internet, we’re all dumb!

@mathewthatcher6274 2 ай бұрын

So it's Hop's fault that my pants size is always out of stock. That guy.....

@TehPhysics 2 ай бұрын

Socks casually testing himself with the Gom Jabbar pain box from Dune.

@aaronfarnsworth7653 2 ай бұрын

Looks like they have those pain boxes on Etsy. He could test socks with a lookalike. There was a seller with a working Thumper clone.

@MP-ky3hc 2 ай бұрын

Until Glock stops giving all of its attention to the military and LEO market, the civilian market will suffer.

@GBGuns 2 ай бұрын

Cats love the leg strings!

@bleepbloop47406 2 ай бұрын

7:57 - It's funny you brought that up, my local police supply store recently got in a bunch of unissued G45s that were cut for RMRs by Glock. Maybe it was a one-off RFP from a local department? Looks like they're still running around with factory bucket sights though, I may swing by this weekend to look at/buy one.

@Hoplopfheil 2 ай бұрын

There is a new LE only series of direct cut Glocks they don't sell commercially.

@JoeUglyFatMama 2 ай бұрын

GT Distributors got a bunch of those. They've been selling them for months for $539. The RMR cut is oversized, so that's an ugly issue. Glock should pay royalties to Shadow Systems and just adopt their cut.

@JoeUglyFatMama 2 ай бұрын

"Those" being G45 MOS RMR cut

@Yellow_Flannel 2 ай бұрын

I agree, the best Glock killer is an aftermarket lower, stock internals, and PSA upper 😂 Been saying this for two years.

@christopherkapic 2 ай бұрын

Just did this.

@Yellow_Flannel 2 ай бұрын

@@christopherkapic I bought my first Glock about two years ago (gen5) and modded the grip to fix the angle. Still need an optics cut. Should’ve done this to begin with.

@AdamSkrzypczak 2 ай бұрын

Or... A P10

@Yellow_Flannel 2 ай бұрын

@@AdamSkrzypczak facts but no Glock magazines

@tardactual8791 2 ай бұрын

Keeping your clone simple as what makes them run.

@riseagainst816 2 ай бұрын

I’m just here for the Socko update

@GLAJMAN 2 ай бұрын

It would be fantastic if all the pistol red dot manufacturers. Sat down and picked one god damn mounting solution that works. That would be great.

@tmgjurassic3738 2 ай бұрын

As a high volume shooter, it is really tough to compete with the reliability of the Glock. My Gen 3 34 has over 100k rounds, the only repair was replacing the firing pin spring. Every other pistol I have tried has been less reliable, or required more maintenance.

@alastor8091 2 ай бұрын

No. No it isn't.

@dar5647 2 ай бұрын

@@alastor8091 are you stupid? Glock is renowned for its reliability and longevity that other brands just simply do not meet. There are countless stories of people having in excess of 20k rounds on a glock without even cleaning it. There are no other guns consistently putting up the round counts that glocks are. Shit my shadow systems broke in less than 600 rounds.

@custosvilicus 2 ай бұрын

“Going to have to replace factory Glock sights”, haha. That is like saying you are going to have to thoroughly cook chicken before eating it. 😁

@custosvilicus 2 ай бұрын

Don’t eat raw chicken, for real.

@robertfoote3255 2 ай бұрын

😆

@HWG-wm8ld 2 ай бұрын

I’ve replaced every guns sights I’ve ever owned.

@Hoplopfheil 2 ай бұрын

You've never had chicken sashimi?

@peterquinn2997 2 ай бұрын

@@Hoplopfheilyes or chicken tartar.

@Mayor_McCheems 2 ай бұрын

For the ad the strings at the bottom are for you to blouse your boots if you dont want to tuck them into your socks or dont have and blousing straps

@gr6373 2 ай бұрын

Best part of the pants

@makam2089 2 ай бұрын

Cough..P10C...cough.

@Excard0n 2 ай бұрын

I'm glad people aren't all about it. Keeps the price down.

@NoName-sl5rp 2 ай бұрын

@@Excard0n I just bought a brand new 2023 CZ P10F for $250. I kinda want to buy a couple just for funsies.

@randomnobodovsky3692 2 ай бұрын

It doesn't use glock magazines. Yes, their magazines are good but not as bombproof as glock mags. (And glock magazines are way more pleasant and quick to load, at least for my hands).

@blackout.ghost718 2 ай бұрын

@@randomnobodovsky3692nah

@Michaelfatman-xo7gv 2 ай бұрын

@@Excard0nNot that down.

@turnermd1302 2 ай бұрын

Beard is coming in nicely Hop, glad to see the TRT is working!

@HawaiiFoodAndFun 2 ай бұрын

I did a video comparing a 20 year old glock frame with 4 different glock clones. (all budget because I dont have Hop money) Was a fun video, somewhat hippy hoppy

@Sick66-qu4uh 2 ай бұрын

Plugging yourself on someone else's content isn't usually considered cool

@HawaiiFoodAndFun 2 ай бұрын

@@Sick66-qu4uh I've been a hoplopfheil fan for years when his channel was small. But i'm just a nobody in a world of gliding monsters

@paulwuzhere 2 ай бұрын

I wore the new production woodland BDUs during moons out. They washed and still look like new. Quality stuff.

@PHIllip324 2 ай бұрын

Smith & Wesson: (makes the M&P 2.0) Hop: "The Glock killer will be a Glock clone."

@thedownwardmachine 2 ай бұрын

A Glock clone needs to fit the holsters, interchange the same parts, and use the same mags. At which point it’s just a Glock

@sinisterthoughts2896 2 ай бұрын

Pretty much defeats the point of innovating, agreed.

@FoxtrotFleet 2 ай бұрын

Smith Wesson tried that in the early 90s.

@MP-ky3hc 2 ай бұрын

Isn't a clone of anything really just essentially a copy of that same thing? 🤔

@drivingsouthwest6895 2 ай бұрын

If it were me, I'd go P80 and DIY it. Might not be cheaper, but you get the gun you want. Which is essentially what the SS MR920 is.

@mghegotagun 2 ай бұрын

Pretty much. Any complaints about glocks I would have I basically got rid of with a brownells direct mill slide, trijicon standard height fiber irons, and doing my pick of internals.

@BarnDoor-won5ve 2 ай бұрын

I went that route. Took a bit of trial and error, tweeking, and learning along the way to get it reliable, but since I have, it's my favorite handgun and I now know a lot of what makes glocks so infamous. I get it now. It's an amazing design, especially considering it's over 40 years old

@spencerbullett7690 2 ай бұрын

Holosun fit the SCS to direct mount MOS slides. It sits REALLY low and you can cowitness stock Glock sights.

@timeless4044 Ай бұрын

2:16 The point of the tie on for the pants at the bottom are two main things. One it acts in a similar fashion to a boot blouse to keep bugs and insects out of your pants and two they can be used as a flotation device in the water, essentially if you close the ends and tie the pants around your neck you can blow air into the waist area and if the pants are fully wet, it will fill with air creating a flotation device

@nurse-dude 2 ай бұрын

We need a Glock counter for this video

@oldmanbaleb 2 ай бұрын

One thing I'll say, i made a frankendagger (dagger upper, sct19 frame) and ive had 2 different firing pin assemblies break on me with very little round count. the first one the tip of the pin broke off, psa replaced it for free all well and good. the 2nd one broke on the shaft. I only use it as a range toy, but idk how well I'd trust their firing pin assemblies on a carry gun

@Thickamus_Jones 2 ай бұрын

It’s not the first time I’m heard of someone’s striker breaking off so I replaced my striker with an OEM Glock one for peace of mind.

@Excard0n 2 ай бұрын

I never broke my tip and shaft but good to know how to avoid it.

@UMADBRO64 2 ай бұрын

Check your striker liner. You might not have one. Its literally just a plastic bushing that sits in your striker channel.

@johnb.6468 2 ай бұрын

Did you buy a titanium firing pin yet their chief?

@mghegotagun 2 ай бұрын

Psa daggers have semi regular reports of their striker tips breaking. I use brownells slides with (mostly) oem internals for builds. Their direct cut slides for rmrs were very serviceable.

@RealBearFace 2 ай бұрын

As a newer guy to this hobby of ours, i've really enjoyed the Shadow Systems FS MR920. the grip and slide alone are really enjoyable to manipulate and having the red dot system on there ready for when i get a dot is cool. i think they're worth it. i don't know about buying the higher end SS guns because you can just get the tritium front sight and magwell flare from the shop on SS's website and to me, that's the most i would do to my piece.

@Wabbitsw 2 ай бұрын

The song at the end was pretty good.

@Hoplopfheil 2 ай бұрын

Thank u

@toddinfl 2 ай бұрын

Glock clones can't be unseen once seen.

@nateo6806 2 ай бұрын

YEAAAAHHHHH HERE COME THE ROOSTERRRRRR

@comacoda 2 ай бұрын

Lol 👍 "he ain't gonna DIE-e-Eyeeeeee, no, No, No-oh-oooo"

@smartfella7914 Ай бұрын

AWW YEEEAAAAHHHAHHHHHAAAAAAAHHHHH!!!!!!!!

@invaderjoshua6280 Ай бұрын

I feel like shadow systems is the only one that’s going to be a legitimate threat in the coming years to Glock atleast in the USA. Their stuff seems very well-made and pretty competitively priced for the features that they have. And let’s be honest those fluted bronze barrels are pretty sexy.

@everydaycarrymonkey2691 2 ай бұрын

Your monotone singing becalms my wife greatly as I break the news to her that I've bought yet another Glock. Thank you, good sir!

@Sig_P229 2 ай бұрын

I will say my genuine opinion of a Glock ki||er was actually the Walther P99. The striker is different and unique. It was designed in the early 90s with the help of Wesp. Wesp worked at Steyr then Glock. He helped design the P99. Other than a DA/SA striker, the striker design itself carried over to the PDP and PPQ.

@randomnobodovsky3692 2 ай бұрын

It's really good but magazines aren't as durable. Glock magazines are one of the major selling points in my opinion.

@Sig_P229 2 ай бұрын

@@randomnobodovsky3692 I agree. That’s why so many PCCs use them too.

@stevem4783 2 ай бұрын

@@Sig_P229 PCC mag compatibility is a big deal. It's so very convenient for many to be able to have a carbine/braced pistol that uses the same ammo and mags as their pistol(s.) I use a Dagger/PC Charger combo for home defense for that exact reason.

@Sig_P229 2 ай бұрын

@@stevem4783 same. I have the Glock 17 / PC Carbine as my set up

@onpsxmember 2 ай бұрын

@@randomnobodovsky3692 They aren't more durable, they are cheaper and sold everywhere. That is THE reason they're used everywhere. It's not cause everyone loooves plastic on plastic friction. Glock mags are shitty to open and clean too. Oh yes buy a tool for it. Any damage to a Glock and any malfunction magically disappears from the minds of the owners.

@phillipk1258 2 ай бұрын

Shadow Systems’ Foundation series is where it’s at

@dar5647 2 ай бұрын

My ss mag catch broke in 600 rounds so i wouldnt really bet on em.

@poncho12335 27 күн бұрын

Just purchased the p80 psf9 and the psc9 with threaded barrel,suppressor height sights and three mags for $245.00 each. For me it was a no brainer

@austinrothjr 2 ай бұрын

Those BDU pant leg ties are actually pretty great if you have to tie your pants off over your boots to keep stuff out or tie them off to make a floatation device.

@SqueakiestChair 2 ай бұрын

After getting my G45 stolen, i switched to Canik and i couldn't be happier. They're a very nice pistol for the price and come with some nice accessories.

@HWG-wm8ld 2 ай бұрын

How does one get a gun stolen?

@Caligari87 2 ай бұрын

@Les-bu6kz Completely your fault. Never ever EVER leave your guns outside your control. Truck guns are stupid.

@HWG-wm8ld 2 ай бұрын

That’s on you. Being irresponsible isn’t someone who should carry guns. It’s either on you or in a safe.

@SqueakiestChair 2 ай бұрын

@HWG-wm8ld car was broken into whilst at work. Chill my guy

@SqueakiestChair 2 ай бұрын

@Les-bu6kz yeah. Bro doesn't get the concept of shitty people stealing from a vehicle while the owner is away

@Ringer2191 2 ай бұрын

Everybody forgets about the HKVP70.. want a better striker fired pistol? VP9

@sinisterthoughts2896 2 ай бұрын

Yup. It bugs me how people think glock invented polymer pistol frames.

@HWG-wm8ld 2 ай бұрын

They invented the simplest designed polymer striker fired gun.

@cletustheslackjawedyokel6083 2 ай бұрын

They forget because the VP70 was a commercial flop. No one wanted a direct blowback gun with an 18 lb trigger. It was like a Highpoint with a bigger magazine and an awful trigger at HK prices. We also couldn’t have the plastic stock that made them full auto.

@Ringer2191 2 ай бұрын

@@cletustheslackjawedyokel6083 14 years before Glock too. Now jump to modern day. ... A full auto pistol? What a waste

@DavyCrosier 2 ай бұрын

The one caveat that has prevented me from switching to Glock clones entirely is the holster support. If I want a holster for my PSA Dagger, it’s gonna be harder to find one than for my Glock 47, like you said.

@BattleChemist 2 ай бұрын

Kitter: If I fits, I sits. 😹

@diet_dr.demoncore 2 ай бұрын

waiting for the glock that fires caseless ammo

@thekraken1173 2 ай бұрын

So you want a polymer blocky musket?

@RedEyePergo 2 ай бұрын

I hated Glocks until i got my hands on my SS DR920P put a timney trigger and 508T on it and its the perfect polymer frame handgun now .

@mghegotagun 2 ай бұрын

I tried a timney in a Grey ghost (basically a p80 frame with gen3 part compatibility with their stipple pattern) in a local gun shop. Something about how it was configured to feel like the trigger was not following my finger back on reset did not sit well with me. I'd rather my overwatch precision falx triggers in my p80s.

@BarnDoor-won5ve 2 ай бұрын

Johnny glocks for me

@RedEyePergo 2 ай бұрын

Sounds like an install issue . Mine resets just fine @@mghegotagun

@RedEyePergo 2 ай бұрын

@@BarnDoor-won5vehe makes a tumnet retirn spring and trigger shoe as well .I havent tried em though

@dar5647 2 ай бұрын

My dr920p had a broken mag release in less than 600 rounds.

@MagicPrepper 2 ай бұрын

"someday we'll now why that grip angle works"... it's today. For years I hated the grip angle until I shot Glocks for years and the problem slowly dissipated into a solution.

@CGa2887 2 ай бұрын

Glock does make direct mill slides for the RMR, the DPP, and the acro, but for some reason they don’t like selling them to anyone, but LE

@FogCityDude 2 ай бұрын

Glock also has a 509T version as well.

@BlueLoneWolf54 2 ай бұрын

As an actual owner of two glocks, I will continue to shoot but I still haven't found the reason why they're so overloved. 😖maybe I'm just broken.

@wanderingcalamity360 2 ай бұрын

They're pretty basic bitch by modern industry standards. They were novel in the 80s and 90s, but they really have not done much to keep up with the times. About the only thing they really have going for them is their ubiquity and aftermarket support.

@f308gtb1977 2 ай бұрын

I have 4 and they’re… ok. I don’t carry one.

@Katana_Gryphon 2 ай бұрын

I like Glock but I don’t love them either. The only thing more annoying than a Glock fan…is a Glock hater. It’s a tool. Don’t get emotional about it, people!

@BlueLoneWolf54 2 ай бұрын

@@Katana_Gryphon I unno, that's a hard sell, glocksuckers are PRET-TY annoying haha.

@SuspiciousGanymede 2 ай бұрын

Stock Glocks tend to be extremely reliable and require minimal maintenance with a large assortment of magazines and ammunition types. The trade-off is that they're not particularly good at anything, it's a jack-of-all-trades vs specialized tradesman type of argument. If you want more performance there are better options on the market.

@greybeard277 2 ай бұрын

Warning: Do not take a drink every time he says Glock. Seriously, don't do it.

@JoeUglyFatMama 2 ай бұрын

@commandZee 2 ай бұрын

I'm still happy with my old Gen 3s, but I'd be very interested in a video comparing aftermarket optics ready Glock slides.

@Ghostrider-71 2 ай бұрын

P80 build with a grock barrel and a Trijicon RMR. Keeper.

@ALovelyBunchOfDragonballz 2 ай бұрын

The Dagger has QC issues, the Zev OZ9 is _expensive_ . I think what'll "kill" Glock, unironically, is Glock. I think some day we'll have so many in the market that Glock will have a hard time selling a new one vs a slightly used one and they'll have to scale down production. The commercial market, I dont think, can ever actually kill Glock because of all the govt contracts (see: Surefire) but its a funny thought.

@dar5647 2 ай бұрын

Having worked at a gun store for a year, i have never seen so many and such a variety of issues from a manufacturer as i have seen from zev. You can buy a plain glock and completely change every part for cheaper than a zev. Do not buy a zev.

@Robespierres_Ghost 2 ай бұрын

There will always be a place for the Taco Bell of the handgun world.

@tokivikerness8863 2 ай бұрын

I would say burger King

@brian_sipe 2 ай бұрын

Does that make Sig, Wendy's?

@shovex 2 ай бұрын

cuts strings on pant legs... *dies from spider bite to the nuts"

@smithandshortdogs 2 ай бұрын

The strings on the pants are a way to cinch the bottoms so that bugs and whatnot don't crawl up and bite your junk whilst you slumber. Other benefits may exist. Side note... most military style pants have slits in the hems so you can retrofit blousing straps to them. I have 5.11 and two clone brands and they all are setup like that.

@jki808 2 ай бұрын

This isn’t necessarily a true Glock clone like a 920 or a dagger, but the most common transitions I see are to the SIG 365 platform. Especially the XMacro. You have the exact same dimensions but with a slimmer profile yet more bullets. You have sights that are, in my official calculations, approximately 200 times superior and comes optic ready. You have the grip angle fix and a mildly better trigger. The only downside is that it’s Sig.

@ryanpeck3377 2 ай бұрын

Except it's taller (longer grip) than a G19, (inbetween a 19 & G17 but grip length is one of the main reasons people buy a G19. Being as that is important for concealed carrying I personally couldn't go any longer than G19 for carry) plus the slide only accepts the smaller size reddots. Holosun K, Holosun EPS Carry etc. Which is limiting and on pistols you really want the biggest window you can get (thats still durable enough for your needs)... plus while you can get some concealed holsters I don't think safariland has duty holsters for it. The Glock 19 can work as a concealed carry and also a duty gun. The Sig 365 are really just concealed carry guns. Maybe regular p356/xl for summer and p365 xmacro frame for winter carry

@cowboycat9x197 2 ай бұрын

Three hop videos in a week? what is it my birthday?

@johnb.6468 2 ай бұрын

It’s pretty great fr fr no cap

@cdsprech 2 ай бұрын

Only issue with the statement of whether Glock could offer a factory RMR cut is I've had two double stack 9mm Glock sides cut for RMR, and neither cut intruded on the extractor channel. The only cut slide I've seen the extract spring with was the factory MOS cut on my 48...

@tacobeatdown851 2 ай бұрын

The Arex Delta series is also something to take a look at. Very affordable and alot of upgrades right out of the box.

@ethanjohnson5350 2 ай бұрын

Honestly I think if Glock remains the same and doesn’t add things we want out of the box then the competing companies will rule over them with the older systems having what we want. But Glock is Glock, and Glock is good so to speak.

@MP-ky3hc 2 ай бұрын

Their problem is they think good means "perfection" (and also that they rely so heavily on military and LEO contracts that they dgaf about the civilian market).

@sinisterthoughts2896 2 ай бұрын

Glock guys will never fully switch from glocks, thats the fiercest brand loyalty I have ever seen. Most of them are fine, but the loud ones... ugh.

@TheRange7 2 ай бұрын

+1 you're spot on man. It's embarrassing.

@nchintalapani 2 ай бұрын

Some of us have the brain cells to appreciate offerings from S&W and Sig, but as you mentioned the louder loyalists are omnipresent. No platform is safe from them.

@chuckfinley3152 2 ай бұрын

Like Tesla owners and vegans

@gochi6542 2 ай бұрын

@@chuckfinley3152the cope of cybertruck owners is astounding

@chuckfinley3152 2 ай бұрын

“Like, look at me tow, omg!”

@RedZeppelinAirship 2 ай бұрын

I have always found that PSA daggers to be really nice if you do not need the backstraps. I consider them to be an official "Glock Killer" when you put a more normal Glock style trigger in it, and put a HGW slide on them (just purchase the frame then get the slide seperately). 5K rounds zero issues.

@ohainickify 2 ай бұрын

You can just get a Holosun SCS, it’s direct fit to the Glock MOS system slide with no adapter plate needed, and it’s absolute co-witness with stock height factory irons, no replacement needed. Multi-reticle with green dot, circle dot, and “donut of death” circle no-dot. Solar powered, no battery changing needed, and automatic brightness with an overrride function. It’s the simplest, most cost efficient way to have your MOS optic ready right out of the box.

@b20schill 2 ай бұрын

Glone. They need to be called glones.

@lordhuck2689 2 ай бұрын

CZ P-10 is a superior offering to a Glock in every way and comes in at a lower price. Weird that people just don’t buy those

@madeconomist458 2 ай бұрын

Does it take glock mags? No? Then it's not "a superior offering to a Glock in every way"

@bradlaurence5323 2 ай бұрын

The mags are better lol

@lieutenantcoloneltanyavond8273 2 ай бұрын

@@madeconomist458 Except the P10 mags are better.

@Michaelfatman-xo7gv 2 ай бұрын

Inertia. New mags and holster seem too much so stick with same.

@lordhuck2689 2 ай бұрын

@@madeconomist458 The mags cost the same and many people don’t care about Glock mags. People who don’t already have a pile of Glock mags sitting around especially don’t care about Glock mags. That just some dumb meme You’re spouting.

@plaiddad276 2 ай бұрын

CZ P-10 C should have made your list of potential Glock killers.

@BangoJay_Official 2 ай бұрын

8:50 dam dudes, new Hop intro song just dropped

@MasterTaters 2 ай бұрын

If you want a stock glock without the cost one of the king of this has always been the S&W SD9 SD40 VE series. It doesn't try to be more than a glock but does everything it does at exactly half the pricepoint; comes with a nasty but fixable trigger pull though much like the gen 2 glock. It is an actual genuine clone-clone of a gen 2 glock to the point they got sued over it.. The only functional differences are external and the magazine size is -1 from full size models in the available calibers because its somewhere between the sub-compact and full size versions of a glock with a 4 inch barrel most closely comparable with a glock 19/23 but it still has 1 more round in both calibers. The SD in my opinion also has a superior magazine release that just feels natural and comfortable with no sharp edges. It is about 50-70 bucks cheaper on average than a dagger; this isn't something you get if you want optics mounted it is JUST and ONLY a no frills glock clone and probably the cheapest reliable one.

@Azsc2011 2 ай бұрын

Is this the sigma series from S&W? Because it's the only one I remember them getting sued for. A sigma was my first gun.. heavy a** trigger but I didn't know any better at the time. I heard the trigger being so heavy was because of the lawsuit and that the original release had great triggers but I could be wrong

@MasterTaters 2 ай бұрын

@@Azsc2011 Yes it's basically the same pistol. The SD9/SD40 is a product improved version based on it with enough changes to get Glock off their backs. It is a direct derivation you've got it. There are nice trigger kits for it though from a couple different makers that basically all try and reduce the travel and pull weight. SDVE is specifically the improved version of the SWVE and they use the same magazines as the sigma. I may have incorrectly remembered exactly which model caused this but the SDVE(SD9/SD40) is what I'm currently talking about. They still have long travel but I do believe the pull weight is slightly lower stock. I don't know anything about whether or not the trigger was much nicer on the version glock sued for but I will just assume you are correct about that. You can pick one up for less than 300 for an SD9 or less than 330 or so for an SD40 if you find the right online vendors to ship to an FFL. The trigger kits cost 30 dollars or less so total cost remains about half but personally I don't mind the trigger too terribly much because I don't trust striker fired handguns as much as ones with a decocker or a safety anyway. I use the SD40 with a streamlight on it as a bedside table gun and I leave it loaded but unchambered so my cat doesn't set it off somehow. I carry one in the pipe with every gun I carry and I only carry guns with some form of safety.

@UnexpectedInquisition 2 ай бұрын

CZ p10c optics-ready > Glock, and a decent number of Glock people switching for good reason.

@sinisterthoughts2896 2 ай бұрын

I wish the sp01 phantom was still offered state side, but they don't want it competing with their P series. The P series is fine, but those phantoms are amazing.

@Cessna172SNavIII 2 ай бұрын

Nah

@Cyotis 2 ай бұрын

I think Glock would just have to increase the height dimension of their slides a little to give them enough material to screw anything into without changing the internal components. Then they can do milling and cuts to get the mass down to what the original mass was. I guess that will mess with holster compatibility. They could keep the front half of the slide the same dimensions.

@CA.0verview 2 ай бұрын

3:23 watching him reload like that makes me think he rides a shorter buss than normal 🚌 🤣

@greencreekranch 2 ай бұрын

Yeah, pretty sure that's true. There are two kinds of people who buy glocks. Those who go to the store and just ask for a handgun/say the only name they know and those who know exactly why they buy a glock. The first group is kinda irrelevant here. The second group buys glocks cause they want glocks. So to make them buy something else, that something else has to be everything a glock is, plus a little more and/or for a lower price. If someone deliberately chooses a glock they've already decided they want striker fired. They've decided they want minimal controls. They've decided they want a polymer frame. So if you offer them something else, they're not gonna buy it

@shaunsteele4968 2 ай бұрын

The glock killer is that canik tti.

@GhostDaTactical 2 ай бұрын

Shadow Systems fan here. Bought one because it costs less to have a solid optic mount and good stippling (plus I do like the look) than to buy a MOS or non MOS and have all that done to it

@HWG-wm8ld 2 ай бұрын

You bought it for the looks.

@Bryan-1980 2 ай бұрын

I do not think that EVERY striker fired polymer pistol is a “glock clone” what makes a Glock, a Glock, is that trash trigger, frame, grip angle, and lovely slide bitting ass end. Once you change the frame, the firing controls, grip angle, and trigger, it’s no longer a Glock or a Glock clone in my opinion. You can crucify me for it, but that’s honestly how I feel. Unless you can interchange every single part on the gun with a Glock part, then it’s not a Glock clone. Plenty of guns on the market today kill the Glock in every single way except the fact that cops haven’t been using them since the early 90’s, but in every other way are leaps and bounds above the Glock.

@soldier715 2 ай бұрын

Based comment.

@dar5647 2 ай бұрын

You have very fat hands

@CLinAZ 2 ай бұрын

I have 2 Shadow Systems Elite models in black and now prefer them with the direct RDS mount system. They have everything that I want on a factory Glock, but had to pay a lot for previously. Thanks for your Channel!

@inferninx 2 ай бұрын

Saw a G45 with an acro p2 other day at the store and I was like “holy crap, is this a factory bundle?” Glad to hear my guess was correct.

@paulbrower1812 2 ай бұрын

The one paw in the box kills me

@JonesyMcDanes 2 ай бұрын

My favorite not-a-glock glock so far as been a SCT 43X lower with whatever upper you want. 15 rounds, the gen 4 style mag release, a super defined 2 stage trigger, 1911 grip angle, nice texture and contours, and dealers choice of 43 or 48 length slide. The only downside is the safety blade protrudes from the front of the trigger but you can fix that with either a 10 dollar part or a dremel.

@wadesafool 2 ай бұрын

I love my dagger, only complaint is holster compatiblity but that seems to be getting better

@protectpersevere2030 2 ай бұрын

When regular folk ask me what I carry and I say an mr920, they usually don’t know what I’m talking about. So I just say a nicer Glock 19 lol

@HWG-wm8ld 2 ай бұрын

Then they realize you are into looks, not shooting.

@protectpersevere2030 2 ай бұрын

@@HWG-wm8ld You can think whatever you want man lol. I’ve had Glock 19/17s and the Mr920 is just a better overall gun.

@michaelturk7237 2 ай бұрын

G19 owner here. What does the MR920 offer comparatively? I legitimately cannot find out from research because it's all just ads.

@protectpersevere2030 2 ай бұрын

@@michaelturk7237 So first off like hop said it comes out of the box with MUCH better optic cut. Second it has changeable back straps so u can get almost 1911 grip angle which I prefer. Third all the little details dudes spend sometimes significantly more on such as slide serrations, stippling, etc are standard features. There’s a few other reasons but to sum it up A. It just shoots a bit flatter in my hands even without their compensator. B. I got the war poet edition on sale with optic, threaded fluted barrel, etc that ended up being cheaper than buying a stock Glock and then doing all the aftermarket work

@theCrystalWoods. 2 ай бұрын

Venture also got some US milspec cryre pants that take the kneepads! they look cool as heck and i hope they're still around by the time i want some new pants.

@VincitOmniaVeritas7 2 ай бұрын

Directly mounted red dots to the MOS system like the Holosun SCS are a godsend: no plates, cowitness with the factory sights and it even has rear serrations.

@2Amend4Life 2 ай бұрын

Foundation Series from Shadow System is the sweet spot. My current carry is a XR920 and MR920.

@sgtwright14 2 ай бұрын

Funny thing is Glock already has different versions of the MOS cut for mounting specific optics patterns directly, they just don't sell them to civilians

@Dave-0 2 ай бұрын

standing by for an auto-tuned edm remix of Hop's Glock song

@Odd_Ball69 2 ай бұрын

Hey hop, I like that you talked about the PSA dagger. It would be cool if you talked about the SD9 2.0 I know you’ve talked about it’s predecessor but I’d love to see your take on the new line of cheep smith & Wesson 9mm.