The Swiss Torch Explained

Рет қаралды 16,131

7 жыл бұрын

The Swiss Torch Explained by Jack Da Silva for OttoFrei.com.
Check out OttoFrei.com's Swiss Torch Collection:
www.ottofrei.com/jewelry-tools...

Пікірлер: 15

@janharrell2188 7 жыл бұрын

I LOVE mine-good demo Jack-did not know about the pressure markings!

@wendyannh 7 жыл бұрын

This is super helpful, Jack; thanks!

@ValeriaLannes 6 жыл бұрын

thank you, Jack!!! but could you show us how to install the torch on the propoane?

@tedcrum 6 жыл бұрын

Looks good for glass, too.

@angelfranco5809 3 жыл бұрын

Can you cast platinum with the long melting head?? And can you solder platinum with the standar hoke??

@cindyferguson9273 3 жыл бұрын

I have been using my smith little acetylene and i needed more torch for larger pieces and casting. I just set up my torch and I’m excited to try it. I appreciate this video very much as it will help me in choosing the correct tip for different jobs. I would still like to get more information on setting the psi on both O2 and propane gauges. Where can i find this information?

@DennisHicks78749 2 жыл бұрын

I assume you’ve found what you need by now, but this information is available through and copied from various online vendors who sell this torch. I did not copy the fuel/ air settings because I have not been interested in that setup. Recommended OXYGEN & propane outputs per attachment Hoke Style & Micro Head (MH Tip sizes are 0.9mm, 1.2mm, and 1.6mm.) 3 - 7.25 PSI Oxygen: (0.5 to 0.2 Bar) 3.6 PSI Propane: (0.248 Bar) Recommended regulator output pressure settings : Casting head (Oxy/ gas): 43.5 PSI Oxygen (3 Bar) 22 PSI Propane (1.5 Bar) Platinum Head: 21 PSI Oxygen (1.5 Bar) 7 PSI Propane (.5 Bar)

@kamilc8398 4 жыл бұрын

Anyone know how much platinum the Swiss Torch can melt in one go?

@fatimaferreira8251 2 жыл бұрын

Hi, I like very much your explanation, but I would like to know which head should I use when making granulation. Can you give me any help on that ? thank you so much !

@Ottofrei 2 жыл бұрын

Hey Fatima! I'm sorry for the late reply on this - If you still need help you can reach out to our customer support team anytime via Live Chat on our website ottofrei.com or give us a call between 9am and 5pm PCT for help (800) 772-3456. They may need a bit more information on the pieces you are making to help you pick the right tip for your project!