Honda CB900F Clutch Replacement

Рет қаралды 15,078

Жыл бұрын

►► Join my FREE maintenance course to achieve quality service and maintenance practices for your motorcycle → www.themotorcyclemd.com/free-...
In this video we go in after a clutch assembly on this gorgeous 1981 CB900f. When bikes sit up unused for years and years. Mechanical systems like these can seize and lock up.
There is really only one good remedy to get a clutch system working right after this happens.
Join me and see exactly what it takes to get this job done.
Enjoy!
UNCOMMON TOOLS USED: (Affiliate Amazon Links)
Clutch Center Nut Tool - amzn.to/3iCv0bL
AC delco Torque adaptor - amzn.to/3H3n5NZ
Honda Moly Paste (M-77) - amzn.to/3IKSNko
Clutch Holder - (Check Ebay. There are a bunch)
Part Numbers (Factory Honda)
Friction Disk A (7) - 22201-MT8-000
Friction Disk B (1) - 22202-MT8-000
Steel Disk A (6) - 22321-425-000
Steel Disk B (not available) - 22322-425-000
Center nut Lock Spring - 90431-292-000
Center Nut - 90231-KCS-651
Cover Gasket - 11396-425-306
Need some more help with your bike?
Check out the INNER CIRCLE and join the community
www.themotorcyclemd.com/mcmd-...
Is your bike running like crap?
Need Carburetor teardown and cleaning videos?
www.themotorcyclemd.com/premi...
Support Motorcycle MD and pick up the NEWEST Shirt design. Artwork and printing all locally done!
themotorcyclemd.com/shop/

Пікірлер: 38

@clutchpedalreturnsprg7710 Жыл бұрын

Hi, I'm here for the fresh clutch replacement.

@TheMotorcycleMD Жыл бұрын

welcome hahaha

@cpuuk Жыл бұрын

I did this very job on my CB900F, about 35 years ago! That clutch lever arm attached to the cover, did actually snap!

@TheMotorcycleMD Жыл бұрын

WOW! The spring lever arm looks simple enough that I could see it happening 😂

@tedking9793 Жыл бұрын

Way back when....one of my first"special" tools was an old school impact driver..(hammer driven!!). Sometimes it would get that nut off!

@wlingrell Жыл бұрын

Great video. You are a great teacher.

@TheMotorcycleMD Жыл бұрын

I appreciate that!

@radfahtit Жыл бұрын

you can use a thin layer of grease on both sides of the gasket instead of the silicone too, then it comes off cleanly the next time it needs maintenance. idk or whatever. cool bike and great video.

@davidevelyn530 7 ай бұрын

That special plate (that tends to grenade losing rivets destroying friction plates) is there to cushion impact on the stack when beating the bike. Just replaced mine on a 97 Valkyrie. Thanks for your videos !

@motoalley Жыл бұрын

even though i dont have this bike, or have to do the clutch on my VT1100, its always nice to watch your videos, learn alot just by watching

@TheMotorcycleMD Жыл бұрын

Awesome man! There are many applicable techniques that are applied to any make and model! Thanks for stopping by!

@menom7 Жыл бұрын

Yet another awesome Video Cody!!! My 2001 Honda CB750 Nighthawk hasn't had a clutch-replacement since I've owned it (for about 8 years now). All I've ever done is "adjusted" the clutch-play in it since I've owned it and even now,she's going strong,but I know someday that clutch is going to need to be replaced! So this video peaked my interest! Thanks for sharing! : >)

@TheMotorcycleMD Жыл бұрын

Keep taking care of it as you are and you may never! Glad you enjoyed the video man, thanks for stopping by!

@tomtrahan8485 Жыл бұрын

Thanks. I really enjoyed watching..... I need to change the clutch in my 98' 1100 Ace Tourer.

@cmarkchappelle7117 Жыл бұрын

Another masterful job completed! While I don't do much work except routine maintenance on my GL1800, I do very much enjoy understanding how systems on other Hondas work through your explanations and demonstrations!

@TheMotorcycleMD Жыл бұрын

Thank you very much!

@RodrigoSantos-xu9wp Ай бұрын

Thank you so much for your video, you have cleared more doubts than my shop manual did. I own a 1982 cb750f that is starting to ask for clutch service so... let´s see how it goes. Thanks again!!

@jefftaylor947 Жыл бұрын

As always bro - fantastic content!!

@TheMotorcycleMD Жыл бұрын

Much appreciated!

@bob4bob3bob2bob Жыл бұрын

Thank you.

@Todd66 Жыл бұрын

CB900F…Such a good bike. Cool paint scheme. Luv me sum classics. Another really good video young man! Last year I had a 2000 Shadow 1100, Yanked the carbs, cleaned them and installed jet kit. Never done that on a twin…thanks to you I was able to get it on and off the lift pretty quick with no hitches and she purred like she should. Now I have a 2000 Valkyrie. Probably going to pull the carbs this spring…C’mon spring! Happy New Year!

@TheMotorcycleMD Жыл бұрын

Happy new year to you as well Todd! Great job on the VT1100!

@Todd66 Жыл бұрын

@@TheMotorcycleMD Thank you Sir!

@andrewmillard5326 10 ай бұрын

❤ your video on this CB 900F. Never owned one but these are from my era growing up along with the stunning CBX love these bikes and have more appeal than the modern stuff today👍🤓.

@neophobiagarage1845 Жыл бұрын

nice ! and the bike sound is also very nice 👍

@TheMotorcycleMD Жыл бұрын

Thanks ✌️

@dapperbrapper Жыл бұрын

excellent content.

@FilterYT 2 ай бұрын

Thanks, well done!

@fredgarcia7536 8 ай бұрын

The oil comes from the main oil source from your oil reservoir is pumped into your primary for your clutch plates

@parker38 Жыл бұрын

Thanks for the insight I understand better how clutches work. I own a 1984 Honda gl1200 Aspencade is the clutch basically the same to replace?

@drewlebens2948 Жыл бұрын

What socket did you use for removing the main clutch nut? Looked almost like a 4x4 lockout socket

@lukaszM46 10 ай бұрын

Hello, do you have any tips about when replacing the clutch lever arm seal in the clutch cover?

@bobhyde4793 9 ай бұрын

I cannot find a spec. for oil pump drive chain slack for my 2007 shadow vt750. I seems to have a lot of slack as well as side to side play, almost enough that it is rubbing on the gear behind the clutch basket. Does honda not seecify this for any models? Please help if you can

@JPmixet 10 ай бұрын

I got an issue with my 82 CB900F, center cylinders are super lean, outters are super rich. it has an older 4 into one Pro Sport pipe, I did the airbox delete with K&N air pods and use Dynajet kit with their 130 jet in the mains. It feels like there is no advance like it's lazy. It fire up and idles perfect, just bogs when pulling out. carbs were cleaned and new accelerator pump was installed and working. Any help would be great

@vic2095 Жыл бұрын

What should I do if my clutch lever is hard to operate? It's lubricated, OEM, pivot bolt and linkage was replaced already. What to do to my 2002 Honda CB600 (same engine as CBR F3) ? Cheers from Poland!

@tea4me324 2 ай бұрын

Anyone have a 97’ magna750 Looking for a clutch I would like to replace mine or at least keep it on a shelf for a rainy day.

@icandsc Жыл бұрын

4into1.com, or partsnmore.com. both have the double disc. they also say that the rivets in the double disc are known to fail, and that you should change it out. of course they would, right? lol