JOHN DEERE X300 WORN OUT BLADES EVERY 100 HOURS

No video

JOHN DEERE X300 WORN OUT BLADES EVERY 100 HOURS

Рет қаралды 20,930

Күн бұрын

JEREMY FOUNTAIN
THEMOWERMEDIC1
MAIL AND BUSINESS INQUIRES THEMOWERMEDIC1@GMAIL.COM
/ themowermedic1
/ themowermedic1
/ themowermedic1
/ themowermedic1
CHECK OUT TREY DRIVER AND HIS AWESOME KZfaq CHANNEL AND DEALERSHIP
TREY DRIVER
BIG BUCK MOWERS AND EQUIPMENT
3301 STATE HIGHWAY 121
BONHAM TEXAS 75418
www.BIGBUCKMOWERS
/ treydriver1
/ bigbuckmowers
/ bigbuckmowers
-~-
THE MOWERMEDIC1 25+ YEARS EXP DIAGNOSING AND REPAIRING LAWN EQUIPMENT, GENERATORS, WATER PUMPS AND ALL TERRAIN VEHICLES, HIS GOAL IS TO HELP THE DO IT YOURSELFER PERFORM REPAIRS EASILY THROUGH HIS DETAILED VIDEO TUTORIALS, AS ALWAYS PERFORM ALL REPAIRS AT YOUR OWN RISK, ALWAYS CONSULT A SERVICE MANUAL FOR SPECS AND PROCEDURES, HAVE A GREAT DAY!!
SHOP FOR PARTS AT MY ONLINE PARTS STORE AND SAVE!!
astore.amazon.c...
YOU CAN VISIT ME ON FACEBOOK
WWW.FACEBOOK.COM/THEMOWERMEDIC1

Пікірлер: 18

@Lanninglongarmmowing 7 жыл бұрын

We have an LA 175 and the steel they used to make the blades is probably the best steel on a mower I've ever seen and we have. They hold and edge really good and last forever. Surprised to see blades worn out after just 100 hours.

@riverrat1149 7 жыл бұрын

Funny stuff. "Can you come look at my mower it stopped digging"

@BrucesShop 7 жыл бұрын

Thanks for this. 100 hours doesn't seem like much.

@regularguy519 Ай бұрын

Torque on blade nut? Thanks

@wisjohns 4 жыл бұрын

How do get the blades off

@mreddiekmet 3 жыл бұрын

What size wrench do I use on the nuts?

@MrGjcruz 7 жыл бұрын

100 hrs per set of blades is great! On my D140, I'm getting about 30 hrs per set. Probably because of the sandy soil in our area that just eats a set of blades per season. I'd like to be getting 100 hrs but, not likely.

@harryduncan6699 2 жыл бұрын

I have an x304 John Deere with a mulch kit on it. I’m getting a strip of grass down the middle not getting cut. I’m curious is there a right and left blade? I removed mine and they are both stamped M140422 Right. I was wondering if one should stamped “Left”?

@wtbm123 7 жыл бұрын

I never understood why so many people cut so low they cut dirt half the time .

@Hubjeep 7 жыл бұрын

I find decks without wheels scalp easily on hills even when set on a higher setting.

@jakevision6859 6 жыл бұрын

Does the x300 have differential lock ?

@outoftownr3906 3 жыл бұрын

Hi I put new jd blades on an x300 I use & it’s leaving a 3 inch gap in the middle of the cut.I set the blades nearest 90 degrees to each other as I could before tightening nuts What say you please?