How to Install a Basement Bathroom Exhaust Vent--Even in the WINTER!

  Рет қаралды 15,689

markthomasbuilder

markthomasbuilder

Жыл бұрын

This video show you how I install a bathroom exhaust vent in the winter. This project requires an insulated 4" duct, a vent hood kit, and a 4-1/4" hole through my vinyl siding. Check out the links down below to the tools used in this video.
LINKS TO TOOLS AT THE HOME DEPOT...
MILWAUKEE M18 DRILL & IMPACT KIT: homedepot.sjv.io/c/1241924/14...
MILWAUKEE 4-1/4" HOLE SAW: homedepot.sjv.io/kjn3RM
MILWAUKEE M12 INSTALLATION DRILL DRIVER: homedepot.sjv.io/e4oMRg
4" WALL VENT: homedepot.sjv.io/Gj6BDE
4" INSULATED FLEXIBLE DUCT: homedepot.sjv.io/Jr30qQ
----------------------------👕MERCH🧢------------------------
Check out the M.T.B. Merch!! markthomasbuilder-shop.fourth...
------------------------Support The Channel-----------------------
🐾🐾 BUY OAKLEY & LEO A TREAT! 🐾🦴🐶 buymeacoffee.com/markthomasbu...
-----------------------------CONNECT -----------------------------
🎯 Subscribe! bit.ly/3QdN2yu
►Instagram - / markthomasbuilder
►Facebook - / markthomasbuilder
►Twitter (X) - / markthomasbldr
-------------Favorite Amazon Gear----------------
► tinyurl.com/37y2d797
-------------------------Video Gear-----------------------------------
★DJI Osmo Pocket 3: amzn.to/4b1MiVl
★Canon EOS 80D Camera Body: amzn.to/46bLVWi
★ Canon EF 16-36 LENS: amzn.to/3EWvroJ
★ Sennheiser Pro Lav Mics- amzn.to/3PAOudp
★ GoPro Hero 11 - amzn.to/3PI5T3Y
★ Manfrotto 190X Tripod - amzn.to/3tbMMaI
★ Manfrotto X-Pro Tripod Head - amzn.to/3RE6TZb
★ Aputure Key Light - amzn.to/48yo9VR
★ Aputure Light Dome III: amzn.to/3QeaonL
---------------Who Am I?-----------------------------
Hi! My name is Mark Thomas and I'm a licensed residential home builder in Michigan and a fan of home improvement projects, which includes lawn and landscaping.
I'm always looking for the best tool for the job, so that was the idea to the start of my KZfaq channel, reviewing all my favorite tools!
-------------------------MUSIC-----------------------
🎼 MUSIC BY: player. .com/
FTC disclaimer: some links in the descriptions of my videos may be affiliate links which means i receive a small commission. it is no cost to you to use the links, it is totally free.
Thanks for watching and supporting my channel! If you haven't seen my first video on this mower, I recommend you check it out to see an in-depth look at all the specs. I would like to thank Cub Cadet for partnering with me to make this video possible. Please consider subscribing and hitting that bell icon to be notified of future videos.
#HomeDepot #THDproSpective #nothingbutheavyduty #milwaukeetool #M18drilldriver #Milwaukeedrills #M18ImpactDriver #newmilwaukeetools #homedepotpartner

Пікірлер: 27
@GunsOfTheWest
@GunsOfTheWest 3 ай бұрын
Best video I’ve found for installing the outside vent. Thank you!
@MarkThomasBuilder
@MarkThomasBuilder 3 ай бұрын
Awesome, thank you!
@ArtInTheWild24
@ArtInTheWild24 Жыл бұрын
Finishing my basement bathroom and this came in absolutely handy. Thanks for taking the time to make this.
@MarkThomasBuilder
@MarkThomasBuilder Жыл бұрын
Great to hear! You're welcome!🙌
@lawdog516
@lawdog516 Жыл бұрын
This would have been a perfect application for Lexel, that’s great stuff, I use it all the time.
@MarkThomasBuilder
@MarkThomasBuilder Жыл бұрын
Thanks for the suggestion, I’ll try it out
@Jaredxstp
@Jaredxstp 11 ай бұрын
About to go install a basement bathroom exhaust fan today. Thanks for this video it helped
@MarkThomasBuilder
@MarkThomasBuilder 11 ай бұрын
You bet! Hope it goes well!🙌
@Jaredxstp
@Jaredxstp 11 ай бұрын
@@MarkThomasBuilder it did and nice sense of accomplishment
@MarkThomasBuilder
@MarkThomasBuilder 11 ай бұрын
@@Jaredxstp 😎👍
@MarkThomasBuilder
@MarkThomasBuilder Жыл бұрын
I'm thinking about adding and extra stainless steel 1/8" screen to the bottom of this vent. (To keep pests out). Would you recommend anything else?
@georgedavall9449
@georgedavall9449 Жыл бұрын
Mark Thomas! Hello, and my late wishes for a Merry Christmas to You and yours! Looks like you had a White Christmas? Good solid video. Should help a lot of DIY’rs out there. Had to chuckle @ 01:21. “Came out right where I planned it!” I know you know your stuff, it just made me laugh! Really good way to get through that vinyl, in those cold temps! Awesome job, and that M18 Fuel drill made it look easy. Not a fan of the drill, but it is a beast. Latest Gen drill? take care! Happy New Year to You and yours, and to all you fellow tubers!!! 👍👍👍🎄🎅🎁😊
@MarkThomasBuilder
@MarkThomasBuilder Жыл бұрын
Hey George, Merry Christmas and a Happy New Year to you! I'm using the M18 4th generation drill, which has the auto-stop anti kickback feature. I'm planning on venting my other bathroom out the roof, but I may wait till spring for that project, unless I have time next Tuesday with 57° weather. I know the freezing weather will move in after that and last until March.
@Gracegreene1
@Gracegreene1 Жыл бұрын
What is the outside height from the ground to the outside duct?
@tctulloch
@tctulloch 9 ай бұрын
Looks good. Any concern with heavy snowfall possibly blocking that vent?
@MarkThomasBuilder
@MarkThomasBuilder 9 ай бұрын
The east side of my house is protected from snow drifts, so I'm in the clear. I am considering a roof vent for my other bathroom. I don't know if the warm air from that room blowing out would melt the snow or not. I guess we'll find out.
@tctulloch
@tctulloch 9 ай бұрын
@@MarkThomasBuilder Thanks good. I think I see a similar situation over here, but not sure if there's enough space to work a vent to the wall.
@Scruds
@Scruds Жыл бұрын
Hey Mark It's Me Collin I'm doing well getting ready to start 2023 Spring Semester Of 8th Grade so Hope that you are ding well hope that you had a safe New Year and Christmas I did Take Care Collin
@MarkThomasBuilder
@MarkThomasBuilder Жыл бұрын
Thank you, Collin! Happy New Year! Hope 2023 is an amazing for you! 🙌 🎄🎉
@Scruds
@Scruds Жыл бұрын
@@MarkThomasBuilder Same To You Hope All is well I am Doing Great
@jimmyjackass1805
@jimmyjackass1805 Жыл бұрын
Why did you use an adjustable 90% for your extension piece ? Why not just use a piece of 4" duct attached to the vent housing ? IMO those Adj elbows are weak and break very easily. If that was all you had I would have at least wrapped the gores with foil tap or band it with strapping. I never use Adj 90% Elbows on a Dryer Vent they tend to collect lint and could be a fire hazard. For exhaust perfectly fine. JMO
@MarkThomasBuilder
@MarkThomasBuilder Жыл бұрын
I'm planning on putting a dryer vent in sometime soon. I appreciate the advice you mentioned.
@jimmyjackass1805
@jimmyjackass1805 Жыл бұрын
@@MarkThomasBuilder I have been a Tinknocker for 32 years. When installing Dryer Vent Duct on industrial jobs Hospitals Apartment complexes etc etc. We use a Foil Tape that has a Butyl Tape backing. It is super sticky and wont leak. Because in an industrial setting the Duct runs tend to be longer than in a Home or residential setting. This helps hold the Duct firm and not have any Zap or Zip screws poking on the interior of the Duct. Witch is a No No because of lint catching on them. I was installing a Bathroom exhaust in my Basement thru a 4" Dryer type vent. So I stumbled onto your Video. You taught me something . I used my Heat Gun to warm my Vinyl Siding before I used my 4.5" Hole Saw. So for that I think you. My Dryer is on the 1st floor of my house. However the vent for our Dryer goes out the Sill Plate in our Basement. I moved the Laundry room from the basement to the 1st floor after my Wife had a Knee replacement surgery. So I did not want to have another vent hole going out the side of the house up higher off the 1st floor. I just ran it to the existing basement outlet. So since it's kind of a longer run. I installed a Inline 4" Dryer booster fan. So it keeps the line free of lint. Thanks again for the Siding Tip and sorry for my bad grammar in advance. LOL
@MarkThomasBuilder
@MarkThomasBuilder Жыл бұрын
Interesting tips you pointed out there. I never thought of an inline booster fan. I recall one of my new home building projects and we got knocked down by the inspector for the dryer vent line. They needed proof from the owners manual that our line wasn't too long. We found in the manual that we could only have a few turns over so many feet, like 20' I recall. We gave the inspector proof and got it approved. 👍
@jimmyjackass1805
@jimmyjackass1805 Жыл бұрын
@@MarkThomasBuilder LOL Yeah never get the inspector Ticked off. It's kind of like dealing with the Police. Yes Sir No Sir. They can make you or break you.
@MarkThomasBuilder
@MarkThomasBuilder Жыл бұрын
@@jimmyjackass1805 Haha, yep!💯
How To Vent Your Microwave Outside [Over The Range Style]
37:17
HouseImprovements
Рет қаралды 326 М.
Fix Your Bathroom Exhaust Fan FAST!
24:20
Home RenoVision DIY
Рет қаралды 1,2 МЛН
MEU IRMÃO FICOU FAMOSO
00:52
Matheus Kriwat
Рет қаралды 44 МЛН
How To Vent A Bathroom Fan Through The Roof
0:59
Tool Addicted Carpenter
Рет қаралды 422 М.
Best Venting options for a Bathroom Exhaust Fan
0:54
Bathroom Remodeling Teacher
Рет қаралды 56 М.
How to install a bathroom fan in a basement.
20:41
Ideal Direct Home Improvements & Indoor Gardening
Рет қаралды 107 М.
Basement Bathroom Rough In Plumbing Tour
13:08
Fix It With Zim
Рет қаралды 1,2 МЛН
Code-Built Bathroom Ventilation | DOOMED to FAIL
6:40
Addison Homes
Рет қаралды 64 М.
I Saved $5,000 Insulating My Basement - How to Insulate Basement
23:06
Which  exhaust vent hood is the right vent hood for your house?
14:23
Venting Bathroom Vent Fans | 3 Best Options
7:38
Bathroom Remodeling Teacher
Рет қаралды 97 М.