Next episode, rebuilding it: kzfaq.info/get/bejne/heCKmdCayp_SqZs.html
@joseperez-cl8jk2 жыл бұрын
Amazing the way you just took your time and dismantle that transmission this is the first time to see how it done thank you. JoP
@joeyelll99402 жыл бұрын
Just picked up an 88 4Runner for a absolute steal, really excited to work on it and watching these videos makes me feel lazy lol
@RM_Garage2 жыл бұрын
Sweet!! They’re fun to work on
@ColeAdkins-c1fАй бұрын
Understanding WHY is better than Knowledge...thanks for the video
@chriscollins2602 жыл бұрын
Good tip on the impact driver and the gear puller.
@RM_Garage2 жыл бұрын
👍 thanks for watching
@CB-hr6zs2 жыл бұрын
Good video bro keep it up everyone can say whatever but they aren’t the ones taking apart the trans for the first time and filming it for KZfaq.
@RM_Garage2 жыл бұрын
Thanks! Yeah totally not worried about it and to be fair it went really well! No issues tearing this thing apart.
@efil4kizum7 ай бұрын
i have an R150F in an old gen1 Tacoma... it made it to 341k miles on the original clutch (throwout bearing started the chirping at last) so i finally had the clutch parts replaced. Upon disassembly found that the pilot bearing had roached a nice groove on the input shaft and the input shaft bearing was a bit on the wobbly side. [27-Jan-2o24]
@oscarpuente2029 Жыл бұрын
outstanding!
@user-iq3eu8ql3q8 ай бұрын
Very interesting and thank you for your time Jahbless
@overbuiltautomotive1299Ай бұрын
did not think it happen so early in the process!! its apart so it has to happen now to funny i tell may self that B.S to lol reminds me of me
@akawireguy1197 Жыл бұрын
The pads on the 1-2 shift fork should be examined to make sure there is still plenty of meat on them. The 1-2 fork gets used more than the rest of them and if the pads get too thin you will get the dreaded first gear kick out and a new shift collar won't fix it.
@gregoryg.campbell387410 ай бұрын
The dreaded first gear kick out. Thanks for the tip. I seem to be having that problem in my four-speed.
@mollisika Жыл бұрын
Thanks for really informative video!!
@yukkosuomenen7 Жыл бұрын
Nicely done! Thanks!
@RM_Garage Жыл бұрын
thanks!
@ivanihirwe Жыл бұрын
Indeed sir!!!
@tamirumekonnen9971 Жыл бұрын
Pls next, Assembly this gear box
@RM_Garage Жыл бұрын
I do. Check the next video
@fu4383 Жыл бұрын
Magnificent
@dundeeecroc2 жыл бұрын
Hi, can we get this video Closed Captioned? (CC) thanks! I have a 1985 4runner SR5 .
@RM_Garage2 жыл бұрын
Hey there! Give it some time, YT takes a while to process bigger videos like this one. CC/subtitles should be available by the end of the day, as well as 4K.
@dundeeecroc2 жыл бұрын
@@RM_Garage Thanks for the heads up! Btw, where is this/your garage?
@dundeeecroc Жыл бұрын
Hi again, my 1985 Toyota 4runner SR5 5 speed's transmission makes noise in 1st 2nd and 3rd gears while on the street/road from a stop, it does not make noise in the 4th or 5th or even coasting... any ideas to what it may be? I also replaced the trans gear oil the other day with Redline full synthetic 70w90...... please advise, thanks!
@Mike_Allegro2 жыл бұрын
Where are you buying the rebuild kit from? Are you replacing the syncros as well?
@RM_Garage2 жыл бұрын
I was originally going with Cobra but they're out of stock. eBay has quite a few sellers who have Nachi bearings with synchros for $200. Yeah I plan to replace the synchros.
@Mike_Allegro2 жыл бұрын
@@RM_Garage I am about to rebuild my W56 as well. I wanted to use Cobra but also noticed they were out of stock. I found these guys out of Redding, CA. They use Nachi and NSK bearings. $ 159 dollars. transpartswarehouse.com/bk162ws-w55-w56-w58-toyota-transmission-rebuild-kit-5-speed-1978-1991.html
@ThisOldYota2 жыл бұрын
Dang it!! Now I have to mine. Are ya going to do the rebuild?
@RM_Garage2 жыл бұрын
Yup, I plan on it!
@RM_Garage2 жыл бұрын
Just following up, the rebuild video is posted!
@ThisOldYota2 жыл бұрын
@@RM_Garage Yes!
@msskgamer6554 ай бұрын
Super video I like you 💯
@A_R912 Жыл бұрын
I like them snap ring plires. What brand are they?
@RM_Garage Жыл бұрын
I don't remember but I upgraded them to something better, Proto. amzn.to/3qoqhOg
@A_R912 Жыл бұрын
@@RM_Garage thanks for the link.
@Dr.Tarekh-Rasul Жыл бұрын
Nice
@user-kc4ju1ty9o5 ай бұрын
Ok
@danielklassen27 Жыл бұрын
Inertia is what drove off the gear.
@ColonCrusher2 жыл бұрын
We’re you ever able to get your hands on a marlin crawler kit?
@RM_Garage2 жыл бұрын
No, they’re out of stock still :/
@RM_Garage2 жыл бұрын
Just following up, the rebuild video is posted! I used a kit from transpartswarehouse which was all OEM spec NSK/Nachi/Koyo.
@devindadevinda77499 ай бұрын
Very good vido
@silverfox8915 Жыл бұрын
where did you buy your rebuild kit from ? thanks
@RM_Garage Жыл бұрын
It’s in the description of the rebuild video. (The next video after this)
@RM_Garage Жыл бұрын
kzfaq.info/get/bejne/heCKmdCayp_SqZs.html
@chiefmechnic6 ай бұрын
❤
@pojdiavaj1422 Жыл бұрын
👍
@Bahram.mechanic6 ай бұрын
👍👍👍👍👍❤
@zumazoomzoom76322 жыл бұрын
Mine works perfectly it just leaks in the middle on both sides 😂
@RM_Garage2 жыл бұрын
Haha nice! Don’t they all? 😂
@rodolfoschneider157615 күн бұрын
Tracción a zEspñoln
@bepo1784 Жыл бұрын
Thanks a lot - it´s very helpfully.
@GenAfterNextTactics Жыл бұрын
Was considering doing this job…yeah no, way too many pieces and moving parts.
@RM_Garage Жыл бұрын
There is a lot of room for error, that's for sure.