Timing a 1965 Mustang with a AccuSpark P8000 Timing lamp

  Рет қаралды 37,650

AccuSpark Ignition Systems

AccuSpark Ignition Systems

13 жыл бұрын

Timing Accuspark P8000 timing lamp

Пікірлер: 9
@friedchicken1
@friedchicken1 11 жыл бұрын
i have no idea why that one youtuber thumbed down!! this is a good video! thanks uploader!
@krusher74
@krusher74 4 жыл бұрын
So if you only have one mark to line up and its 6btdc. should you set the sp8000 at 0 and then line that mark up?
@motoringon
@motoringon 9 жыл бұрын
Tony, how does this light work with timing marks located at the bottom of the timing cover, such as MGB 1969/70?
@TheChazz1225
@TheChazz1225 12 жыл бұрын
I have always been advised to set the ignition timing of My VW Beetle to 28-30 degs BTDC reving the engine to 3000rpm as it is the best way to set timing when using electronic ignition. When the car idles at 900rpm the timing mark sits between 5-7 degs BTDC. I notice with your presentations you set your timing on idle only to achieve 10 degs BTDC . My dizzy is Bosch 009 without Vac Advance. Can you advise if my method is okay or do you think setting up on idle is okay for My Bug. Regards Joe.
@krusher74
@krusher74 4 жыл бұрын
The reason we set 009's at total adance is because many of them are very poor quality. So lets say you have set yours at 28/30deg total. if it falls to 5/7 at idle it advances 28-5 (or 7 -30) 23 degrees. if you set this up at 10 idle then at total it will be 33 (10=23) Ideally you would like 10/12 idle and 28/30 total from a 009, but you need one with only 18ish degs of advance to get that, so you are stuck with what you have, because its advancing from a low 5/7deg at idle and 009 tend to have a slow advance in the lower revs I would guess you have a flat spot when moving away.
@jordanbkelly
@jordanbkelly 6 жыл бұрын
I almost jumped out my seat when he clamped down the distributor!! Turn off the engine first if you have no fan shroud like him and I!
@lancemannion7568
@lancemannion7568 5 жыл бұрын
Me too! Never ever stick your hand in there with those blades spinning!
@Shitbird3249
@Shitbird3249 4 жыл бұрын
Don’t worry kids dad has it handled.
@Mentorcase
@Mentorcase 10 жыл бұрын
Say what? couldn't hear over that damn noisy exhaust.
How to replace oil pan gasket on a Ford 289
15:42
Andy Kruse
Рет қаралды 24 М.
Идеально повторил? Хотите вторую часть?
00:13
⚡️КАН АНДРЕЙ⚡️
Рет қаралды 10 МЛН
Mama vs Son vs Daddy 😭🤣
00:13
DADDYSON SHOW
Рет қаралды 51 МЛН
CHOCKY MILK.. 🤣 #shorts
00:20
Savage Vlogs
Рет қаралды 16 МЛН
Timing Light reviews - Accuspark SP8000
14:26
AC Dodd
Рет қаралды 3,1 М.
Installing Coil Spring Isolators
7:32
Andy Kruse
Рет қаралды 10 М.
How to SUPER CLEAN your Engine Bay
21:58
ChrisFix
Рет қаралды 51 МЛН
The CORRECT way to Set Timing on Ford Engines with a Distributor
6:38
Smackey's Garage
Рет қаралды 202 М.
Will a barrel of engine flush clean a sludgy engine?
12:54
Garage 54
Рет қаралды 812 М.
How to Use a Timing Light - Basics (Ignition Timing 101)
5:38
ThunderHead289
Рет қаралды 609 М.
AccuSpark Electronic Ignition Test Rig
3:24
AccuSpark Ignition Systems
Рет қаралды 226 М.
How to Install Engine Oil Pan - Rebuild the 289 Ford - Part 12
8:35
Alf's Mustang Garage
Рет қаралды 6 М.
The basics of Tuning a Lucas Distributor
9:15
Darrens Restorations
Рет қаралды 909
#rockpaperscissors #boysvsgirls Fun!
0:18
J House jr.
Рет қаралды 18 МЛН
I Just Wanted to Build a House! 😭
0:22
ToolTastic
Рет қаралды 7 МЛН
Проверил, как вам?
1:00
Коннор
Рет қаралды 19 МЛН
Проверил, как вам?
1:00
Коннор
Рет қаралды 19 МЛН
САКЕНДІ ҚАТЫНЫ ҚЫЗҒАНЫП ҚАЛДЫ
0:31
Ән - көңілдің ажары.
Рет қаралды 473 М.
Света квадробер в парке! Часть 4 #shorts
0:31
Настя AmyMyr
Рет қаралды 1,3 МЛН