I got the eBay one as well. But it’s not working

Thank you Joan! Hope it was helpful!

Awesome! It does look clean I am very happy with the outcome!

Thanks brotha! We have a long way to go with the Q50 but this has been a nice start!

Nice!

Wasn’t sure what was wrong with mine but this comment helped me so thank you!

I used dealership “Flocking tape”, wrapped them all together. Electrical tape will work.

Like I told the last guy, i only know what I did in this video with this car. If you didn’t do exactly what I did in my video with a 2018 q50 I really can’t trouble shoot for you.

@@TIRADORACING okay thank you hopefully that would help me out I will show my mechanic your video and that way hopefully that will solve the issue

That or you can use black hardware. Either way you really can’t see it lol

U don’t need a washer with lock tight

@@aidenhayes1684 What ? The washers are there so the material doesn’t rip out around the bolt

Thanks and I do not know bro sorry.

You can find in ebay or amazon

Ebay

Had the same wiring. Ended up doing white to red and red to green and black to black. It’s worked perfect.

@@damianr012 I did that and it works but when the brake is applied it flashes until I let off the brake nonstop

@@HunchoMarc1that’s how it was made to work unfortunately. The flashing feature is cool but it’s annoying

Ya the lights itself are only 20$ on eBay

@@hblethan5366 ty bro 😎

@@hblethan5366 do you have to take the diffuser off to replace the lights tho?

Not sure, check out vicrez website or send them an email.

0 grit bro! I’m kidding. Honestly you don’t need to. Just clean it and use the promotor.

You can also just use a Scotch Brite pad

Ooof I’m sorry bro I really am not sure. I don’t want to tell you the wrong thing 😣

I wired them up it works is just when I hot the brakes it only flashes it don’t stay steady

Double check your wiring. looks like something is grounding out or something keeping constant power.

@@TIRADORACING I wired everything again and it still flashes. I connected the same way you connected yours.

Well....that’s all I’ve got. I really don’t know what else you could do. Might be a fault with the led and not the wiring.

@@fredycastro8804 did you fix it?

@@lechonkadventures6616 no, not yet I haven’t figured it out yet, it’s still blinking

I am not sure.

Only install the red and black, it’ll only work when your lights are on but it won’t blink

@@dontbackdown6938 didn’t work

Red to red black to black yellow to red if you want constant

Hobby Lobby! They always have them too. I got that one in like 2012. But their usually always in stock.

@@TIRADORACING really? It's not the Shelby licensed one?? I looked at Hobby lobby on line I didn't see any. Do you remember how they refer to them?? I'd really love to find one for my room with all my cobra things

@@TIRADORACING if you see one I'll gladly pay you for it and to ship it to me in Texas. I'd love to have one for my cobra room

Lemme see what I can find

It will not fit a 2014. Rear bumpers are different.

Yea bro it ain’t even that deep 😂. Why didn’t I just twist the wires together and use electrical tape? I could have used butt connectors too. The auto scene is full of a million preferred ways to do things and everything gets clouded with “the right way to do it is X”. Appreciate the feedback tho

@@TIRADORACING there’s always that “guy” who knows everything these the type of people who I would never listen to.

No clue. Some others have had similar problems but I really have no idea. If you did what I did in this video then I really have no tips other than double check your work.

@@TIRADORACING Thanks for replying and i ll double check it

@@lechonkadventures6616 were you able to figure this out?

Only install the red and black, it’ll only work when your lights are on but it won’t blink

Did you find a way to do it ? I have the same one

?

No sir, the 17 bumper is different.

@@TIRADORACING oh, ok thanks

Me too buddy. Me tooo. 😭

any fix this happened right now…

@@MannyQ50What did yall do to fix it 😭😭

@@OblivvOfficial ended up being a fuse in the fuse box

It’s a clip that releases. Your talking about the Eli tricks connectors? Their behind the trunk liner. Remove trunk liner, unclip the harness. That’s it

Mfr engineering - chassis mounted rear diffuser, you have to call and ask for “Tirado racing spec”

It held on for like 2 years lol I just traded the car in last Friday. Never had a problem!

@@TIRADORACING traded ??!??😭

@@TIRADORACING i had a Q in 2017 and got a scat pack after, and i just sold mine after using it for 2 years for the same amount i got it for and got another Q, i didn’t like the scat /: it was a beautiful car but ehhh kinda a let down

Yea man it was a hard decision but we needed an suv. We got a qx50 luxe and we got the same for the Q that we paid 😂. So same boat. I wanted a charger but I had a srt8 charger now the challenger and after looking at them closer I just wasn’t too impressed. The Red Sports are more my style.

@@TIRADORACING that’s awesome man, i seen some QX , I’d probably in the future do the same and stay in the Infiniti family, i enjoy it a lot, but no kids yet so I’ll cross that later I’m sure 😩

Like I told another guy on here. My model is a 2018 q50 luxe. If you followed the steps I did verbatim there should not be a problem. Idk if Infiniti’s wiring changes between models and years. So if you have anything other than 2018 luxe and you soldered the wires exactly how I did I really don’t know how to fix or change it. 😣.

@@TIRADORACING I have a 2018 sport, its the same, lime green, purple, black, red. Its probably not infiniti, but the product itself because I didn’t get mine from vicrez, I just decided to disconnect the flashing and keep it lit lol.

Everything works fine, it’s just the flashing is continuous when I press on the brakes.

Hmmm I wonder what the difference is in the led light that makes some not blink or continuously blink. It might be a difference in the manufacturer of the rear diffusers…

@@ItsR1C3 how did you disconnect the flashing? Did you disconnect one wire?

Lol it actually came with a sticker, a lanyard and a bottle opener 😅

No it’s a 2018 Q50 Luxe with the 3.0T

Oh wow, I have the exact car but without the sensors. I don’t know what the difference is but two reputable shops told me the diffuser is incompatible with my 2018 luxe bumper. I’m having a hard time returning the product to vicrez now, though I love the product and wish it would fit.

That’s really weird I just installed it on a 2018 luxe lol the bumper is different on 2017 and below tho.

Yeah, it really is weird. The entire reason I ordered it from vicrez is because I wanted the quality/fitment to be perfect. There is absolutely nothing wrong with the product, it’s jus not fitting properly according to two shops! After the first said it can’t work, I decided to go to another popular shop that installed quite a few of these diffusers. He never installed one from vicrez but it essentially looks the same other than the quality of the carbon fiber. Both times, with me willing to pay $$$, told me it’s not compatible. I’m just shocked that vicrez is giving me such a hard time with this return.

Man send me pics of your rear bumper on Instagram @tiradoracing. I don’t see how it doesn’t fit lol. Have you tried installing it?? Or at least holding it up to the rear bumper to see if it fits?

I don’t think so, I think your bumper is different.

@@TIRADORACING Do you know how it’s different? Because I saw this guys instagram page and he has a 2017 and has that diffuser

Right.... a 2017. 14-17 are the same 2018 it changes. This rear diffuser is for a 18-19. So it looks like you need to find out where he got his diffuser seeing your model years are compatible. The vicrez website CLEARLY has the diffuser I used listed for 18-19 so do not buy it thinking it will fit lol.

Will this diffuser fit on a 2017 Nissan Altima?

No

Cristian, I am an english tutor for veterans at Texas State University and your grammar is killing me 😅. Thanks for watching though.

I think there are other companies that make one for the q60’s

We have them in stock! Check us out on ig @southbay_autoworkz

@@southbayautoworkz9117 email sent!

No the bumpers are different.

Aftermarket part will right ?? check out SouthBay_Autoworkz

Juan Inzunza already do but wussup w jaliscos carbon fibor

@leninftp yeah theyre good too, i bought a new steering wheel from jaliscos 😎

Yes sir! I like to mix it up !

Honestly like 200 bucks lol it’s not that hard

I mean I don’t pay for these parts at all… my guy.

But if you believe it’s a rip off explain why so others may read and make a decision based off the information your providing.

@@TIRADORACING Yes sir, I understand the quality of the product is very good but there are competitors that provide this exact diffuser for the Q50 for under $250

That is a very valid point. It’s also the beauty of the market. I would never push someone to pay more if they can get the same product at a better price, at the end of the day we all work hard for our money. My only question would is what is the trade off (if any) for buying at a cheaper price… customer service? I’m not sure, just thinking outside the box. But to be clear you have a valid point.

@@TIRADORACING You’re a King. Just purchased a diffuser for my sexy Q50 and your vid helped me understand the wiring 😇🙏🏻

Whoah buddy I don’t sell it lol 😂 idk what the price was 3 years ago when I did this either. But yea if you can find it at a more affordable price go for it!