Titan Thicknesser Planer Is It Worth It?? Unboxing Set Up & Demo

No video

Titan Thicknesser Planer Is It Worth It?? Unboxing Set Up & Demo

Рет қаралды 5,094

Күн бұрын

Video of me unboxing, setting up and having a go with the titan thicknesser and planer.
aAt the time of purchase this was £199.99 from Screwfix.
hopefully you'll find everything has been covered in this video but any questions please feel free to ask.
#diy

Пікірлер: 26

@rayanderson1870 4 ай бұрын

I have had a similar machine for several years and find it adequate for home use but a bit of a pain to swap between the top and bottom functions. Mine is a different brand but essentially the same machine with a few minor differences, obviously made by the same manufacturer. A few points - you should joint (plane on top) one edge and one face so that you have two smooth sides at right angles, then use the thicknesser to plane the other face and edge, which will then be parallel to the first two edges so you end up with a smooth square board. Also, the easy way to open the switch is just lift the stop button upwards and the switch will pop open. When using the thicknesser on longer pieces of wood it is a good idea to make a longer bed by laying a long flat piece of wood through the throat of the thicknesser to support your workpiece (a cheap melamine shelf is ideal). This will prevent snipe on the leading and trailing ends of your workpiece.

@lyndawkswks853 2 ай бұрын

Thanks a million, great video, really helpful cheers!

@thedoitalldad 2 ай бұрын

You're welcome! Glad you found it useful

@Steve-dr7rr 7 ай бұрын

I’ve got one renamed it death trap with the blades there ok but don’t lose the blade re setting jig as there are no replacement parts or spares for this except for blades and the on off switch. If you want to lube up the chain behind the panel with on off switch best thing to use is the wd40 dry ptfe spray. They don’t like long bits of wood but be careful they can blow up or catch fire sometimes but wear ear defenders as it’s loud and close neighbours might not appreciate it

@thedoitalldad 7 ай бұрын

Appreciate the few tips there. I've accidentally ran a nail through mine so need to change the blades 🤦🏻‍♂️

@keithknight6521 Ай бұрын

@@thedoitalldad it is worth getting a metal detector, I am waiting on Amazon for a Zircon MetalliScanner m40,review it on youtube.

@givemethejob3293 4 ай бұрын

Great review thank you.

@thedoitalldad 3 ай бұрын

Thanks for watching!

@DanCasey810 3 ай бұрын

Good video. I got this a few weeks back but have been a bit too intimidated to use it yet! 😅 I'll have go this evening I think!

@thedoitalldad 3 ай бұрын

Hope you got on well with it

@DanCasey810 2 ай бұрын

@@thedoitalldad had a good run at it there the last few weeks. Only real issue is the dust extract when you're using the thicknesser gets clogged up after about 10-12 passes. Very happy with it otherwise.

@thedoitalldad 2 ай бұрын

@@DanCasey810 Yes I have found the same, I tried connecting it to a vacuum but it still clogged, although the vacuum itself was faulty so I put it down to that. I've picked up a titan vac so may give they a go

@DanCasey810 2 ай бұрын

@@thedoitalldad ya I don't think a shop vacuum would have the volume to deal with it to be honest! Be interesting to hear how it goes for you though! 👍

@thedoitalldad 2 ай бұрын

@@DanCasey810 To be fair it was a huge industrial thing but it was old and knackered 😅

@johnhusband924 8 ай бұрын

Great video and thanks for sharing. Do you know how easy it is to sharpen or changes the blades.

@thedoitalldad 8 ай бұрын

Glad you've found it useful... Well I've accidentally put a piece through with a nail in 🤦🏻‍♂️ So Im going to but some new blades... I'll let you know

@Steve-dr7rr 7 ай бұрын

On the blades you just buy replacement ones and I think it’s 4 nuts you undo to remove blade but do not lose the two small springs underneath the blade

@rayanderson1870 4 ай бұрын

@@Steve-dr7rr Blades can be quite expensive. They are fairly easily sharpened using a piece of wet and dry sandpaper glued to a flat surface (like a sheet of glass - I use an old mirror). Only need to replace when they get dinged by a nail.

@markmoss3073 6 ай бұрын

I've set my planer up and screwed down the bolt to turn on micro switch but it's still not powering up. Any ideas? I've been at this now for the last 3 hours 😢

@HerbieFullyLoaded 5 ай бұрын

Hi Mark, did you figure this out? We cant get it going here

@thedoitalldad 3 ай бұрын

Sorry for such a late reply, did you get it sorted?

@MrOner07 5 ай бұрын

thicknesser and planer are the same thing. title bit misleading

@DanCasey810 3 ай бұрын

Planer is the function he showed first. Thicknesser is the 2nd function.

@thedoitalldad 3 ай бұрын

Hi, this machine has two separate functions as demonstrated in the video 👍🏻

@keithknight6521 Ай бұрын

What he call a planer is also know as Jointer, because the wood goes over the top of the blades and it is a thickness planer when the wood passes under the blades. You should joint the flat wide part first to gets it flat and only then put the planed jointed side against the 90 degree fence and do one edge and finally put planed flat side on the thicknesses to parallel the remaining side.