POLARIS BIG TRIPLE XCR 800 ( this is not good)

Рет қаралды 13,893

todd clyne

2 жыл бұрын

I open up Eric's engine and its not good at all.
Tim.precisionpumps@gmail.com

Пікірлер: 142

@HillBillyRacing 2 жыл бұрын

Thanks for showing that 👍Just got my water pump done glad I did. 🍻

@toddclyne3493 2 жыл бұрын

It's good insurance 🍻

@mikeortmanns3062 2 жыл бұрын

Happy birthday to you and your wife. The bumper looks good thanks for the information on the water pumps

@toddclyne3493 2 жыл бұрын

You bet and thanks 😁

@matthewenerson2095 2 жыл бұрын

Happy Birthday Todd!! Another great video!!

@toddclyne3493 2 жыл бұрын

Thank you 😁

@jrhalverson1280 2 жыл бұрын

Well done and very informative Todd. Thank you!

@toddclyne3493 2 жыл бұрын

Just trying to save someone's engine before it's to late

@DaleTerry 2 жыл бұрын

I told my cousin about running am older sled and taking care of those preventive maintenance things. It'd like the ski dogs with those Isoflex bearings. Change em. So good advice Todd!!

@dandodds3681 2 жыл бұрын

OMG, and I'm bumming because we never got any snow, now I'm going to check my water pump, thanks for the video.

@toddclyne3493 2 жыл бұрын

Glad to help

@geraldgaitsch2068 2 жыл бұрын

Happy Birthday Keep up the good work

@toddclyne3493 2 жыл бұрын

Thanks my friend

@shawnbuckendahl1968 2 жыл бұрын

I double up wrenches a lot. Great tip when you need a little more leverage and don't have room for a breaker bar. Thanks for sharing your tips. I will probably send out my water pump this summer on my 97 XCR 600.

@toddclyne3493 2 жыл бұрын

Thanks and the pump is a good idea

@awbernardy 2 жыл бұрын

I thank you very much for this motor saving public service anoucment..... I can feel your pain... and will have a Beer for you and hope it makes you feel better ;-) ;-) Love to watch this stuff you put up !!!

@toddclyne3493 2 жыл бұрын

🍻🍻😁

@everythingpowersports9604 2 жыл бұрын

Happy birthday man!!

@toddclyne3493 2 жыл бұрын

Thanks buddy

@GR40RCapri 2 жыл бұрын

EXCELLENT PSA!! All the crank bearings but one are smoked?! AYYEEEEE 🤦🏻‍♂️🤦🏻‍♂️😵

@eugenebaroni1298 2 жыл бұрын

Happy birthday man.... Jeep bumper looks great 👍 WOW bad news for that engine..

@toddclyne3493 2 жыл бұрын

Thanks buddy

@jeffnicks2128 2 жыл бұрын

I remember when I turned 50! agree with you on doing the pump just did the one on my cat have a good one

@toddclyne3493 2 жыл бұрын

It's a good idea to do it

@jennifercross5609 2 жыл бұрын

Thanks again my friend for the good information

@toddclyne3493 2 жыл бұрын

Anytime 👍

@MarketplaceMark 2 жыл бұрын

Thanks for your knowledge and information, thumbs up 👍 🍻

@toddclyne3493 2 жыл бұрын

You bet

@airman6822 2 жыл бұрын

Ouch... is all I can say about that engine. Depending on the sled, it might be headed to the grave. Time to crack open a couple Busch Lights! Oh and Happy Birthday BTW...

@toddclyne3493 2 жыл бұрын

2000 xcr 800. The sled is in really good condition

@506curtis 2 жыл бұрын

I have 4 pumps that I should probably send to Tim, before I take my old triples out again. It is a good friendly reminder. Thanks Todd. Yikes that poor old 800 is in rough shape. I am in a similar position with my xcr 800, Not quite that bad, at least my heads are good. But what do ya do, ya gotta save em.

@toddclyne3493 2 жыл бұрын

I totally agree. Hey ahold of Tim he'll fix you up. Thanks

@rileedahlberg8410 2 жыл бұрын

Do you know of any videos on the rxl 650? Just picked one up n love it so far just wanna figure out what to look for

@truckdriver5880 2 жыл бұрын

Happy birthday to you and your wife and many more

@toddclyne3493 2 жыл бұрын

Thanks

@mikeroessler2451 2 жыл бұрын

Love your vids so much knowledge to soak up and also love the trash i can that i got for my 95 xcr.

@toddclyne3493 2 жыл бұрын

Good to hear your happy with the can

@ronlinich8759 2 жыл бұрын

Good video Todd,just was gonna take my 99 for first ride since I purchased,will do pump before I ride as it is whining.

@toddclyne3493 2 жыл бұрын

Please do not run it if it's whining. It's done

@BlindBatG34 2 жыл бұрын

That's a bummer. On the bright side at least you've got someone who can rebuild those pumps for a reasonable price.

@toddclyne3493 2 жыл бұрын

Yepper

@erikm2003 2 жыл бұрын

I just sent my water pump to Tim yesterday! I’ve heard a lot of good things about him.

@toddclyne3493 2 жыл бұрын

The best in the business!!! Hands down

@demonic2534 2 жыл бұрын

We're does Tim live an business called I'm from Maine

@toddclyne3493 2 жыл бұрын

@@demonic2534 Tim. precisionpumps@gmail.com or me at polaris.trashcan@gmail.com

@Mike-cp1ft 2 жыл бұрын

Nice work man!

@toddclyne3493 2 жыл бұрын

Thanks

@jonstevensmaplegrovefarms3754 2 жыл бұрын

good topic. cheap maintenance can save a lot of money. on fly wheel make sure you dont go to long of a bolt because they can damage stator. give cometic a call, they can get you aluminum or copper base gaskets, once in a while the xcr can have base gasket issues. and the copper are resuable.

@toddclyne3493 2 жыл бұрын

Good point that I forgot to mention about not threading your bolt in to far. Lol that's why I'm not a good teacher I forget to mention some really important stuff that is just everyday practice with me. 😁

@bretadkins3631 2 жыл бұрын

Unlike that motor the bumper looks pretty good and thanks for info on the water pump l don't think l would have not have thought of that

@toddclyne3493 2 жыл бұрын

I hope I helped

@michaelschnoor7594 2 жыл бұрын

Happy belated birthday!!

@toddclyne3493 2 жыл бұрын

Thanks man 😁

@alecjagol2447 2 жыл бұрын

Hey todd clyne there's a 1993 rxl 650 for sale on Craigslist il check it out im out on a run and will be gone before i get back

@colelucyk304 2 жыл бұрын

Not good at all! That there is the reason I did a crank up build on my Ultra last summer… pulled the pump to find bearing shards on my drive gear… no good. Split the case to find that the missing ball bearings had shot peened the inside of the crankcase… Definitely recommend getting them pumps rebuilt!

@toddclyne3493 2 жыл бұрын

You have been there also. Its so over looked

@matthewbegin3462 2 жыл бұрын

Happy 50th... sure does happen quick.

@toddclyne3493 2 жыл бұрын

It sure did 😁😁

@zalmanfans1334 2 жыл бұрын

I use to have a 93 Cherokee 266k miles it was a beater I drive that car 33k miles without an oil change and it ran like a top !

@toddclyne3493 2 жыл бұрын

Jeeps are tough as hell!!! I have had a many of them

@AustinLeeckRacing 2 жыл бұрын

one of my biggest fears in my race motor

@toddclyne3493 2 жыл бұрын

Tim will build you a pump that you will not need to worry about at all

@bartnelson2397 2 жыл бұрын

Your the best

@toddclyne3493 2 жыл бұрын

Thanks

@mikecrevier4686 2 жыл бұрын

That's true facts 💯, great motor like many but always a weak spot. Catch er early and ride it hard

@toddclyne3493 2 жыл бұрын

You bet!!

@shawnpaku391 2 жыл бұрын

Good video

@toddclyne3493 2 жыл бұрын

Thanks 😁

@chrisbishop8979 2 жыл бұрын

Todd says…The Balls were gone!! Well, They’re Somewhere!! 😂😂

@toddclyne3493 2 жыл бұрын

🤣🤣🤣🤣 yes they are

@lesterburritt2038 2 жыл бұрын

Omg that's not good. Good my man n ur right most of them old triples probably ended up the way they 1 did.

@toddclyne3493 2 жыл бұрын

Yepper

@LSDdreams808 Жыл бұрын

These engine is pretty impressive

@toddclyne3493 Жыл бұрын

Thanks

@joshuakunerth2833 2 жыл бұрын

Love the channel just bought a 94 xlt special how do I get a trash can and what do I have to do for jetting anything would appreciate your info

@toddclyne3493 2 жыл бұрын

email me polaris.trashcan@gmail.com

@Hockeyfan9884 Жыл бұрын

I friggin have gained so much knowledge from your channel Todd, thanks man. Do you have a Merch site ?

@toddclyne3493 Жыл бұрын

So glad I can help. Yes I do have a merch site. I have it in the video description or I pin a comment with it. Thanks man

@Hockeyfan9884 Жыл бұрын

Thanks dude, I mostly was A.C however, now I am searching for 440 xcr . Times are changing, but I still like my 900 tripple cat .

@Hockeyfan9884 Жыл бұрын

Hey man, so back way, way years ago, of which I " traded over from " Bombardier " at the time. Being about 7 years young, it was way way way faster checking animal traps , than walking in Snowshoes in deep snow winter time.

@toddclyne3493 Жыл бұрын

@@Hockeyfan9884 😅😅

@Hockeyfan9884 Жыл бұрын

@@toddclyne3493 Fact, to trap and catch furs for sale, rather than travel on snowshoes in winter time, the snowmobile helped tramendously, ok, laff ter is Fun, give er

@north6481 2 жыл бұрын

That piston you got in your hand looks good🤣🤣

@toddclyne3493 2 жыл бұрын

not really

@hughjanus6630 2 жыл бұрын

You got a iron worker. God I miss using the one at my old job.

@toddclyne3493 2 жыл бұрын

It's been a huge help on this bumper

@bartnelson2397 2 жыл бұрын

Hay Farmer, Need more triple Mcloven vids.

@toddclyne3493 2 жыл бұрын

working on them

@TheXcr800dude 2 жыл бұрын

What brand of piston do you use for 1999 to 2003 XCR 800?

@toddclyne3493 2 жыл бұрын

spi. not many options

@Welcometofacsistube 2 жыл бұрын

Just about to do my 800 storm. I'll definitely be doing the pump. What about the monoblock triple pumps?

@toddclyne3493 2 жыл бұрын

storm and mono block pumps are not rebuildable

@Welcometofacsistube 2 жыл бұрын

@@toddclyne3493 good times

@demonic2534 2 жыл бұрын

Never knew storm an mono block pumps non rebuildable I have a triple xlt

@captainmikek8695 Жыл бұрын

I have a 98 xcr 800 triple... What is a engine refresh cost? Not sure if engine ever cracked.

@toddclyne3493 Жыл бұрын

All depends but 2000 to 4000 grand is a good guess

@jacobwintersberger8434 10 ай бұрын

How often should you have the pump rebuilt?

@toddclyne3493 10 ай бұрын

Once you do it should last a long time. Just think it just went over 20 years on the first factory build

@tr4415 2 жыл бұрын

Zinc lozengers for sale ... at Walgreens or Rite Aid... help you feel better... cherry flavor is fine

@toddclyne3493 2 жыл бұрын

👍😁

@brysonmayer4235 2 жыл бұрын

Todd I tried the email link for Tim and it bounced back as an invalid email! Need to have a pump rebuilt for a 1997 xcr 600 and would like to contact him about getting something set up. Love all your sleds and videos! Thanks for any information you can give me.

@toddclyne3493 2 жыл бұрын

Tim. precisionpumps@gmail.com

@toddclyne3493 2 жыл бұрын

or me at polaris.trashcan@gmail.com

@brysonmayer4235 2 жыл бұрын

Thank you!

@vannorman1116 2 жыл бұрын

Here he is advertising for PB when in reality he put kerosene on the nutz😂

@toddclyne3493 2 жыл бұрын

Lol I really used PB. I buy it by the case 😁😁

@vannorman1116 2 жыл бұрын

@@toddclyne3493 I'm sure. Just messin with ya Todd. Ur good sh@t !!

@Z-Bart 2 жыл бұрын

Sucks for Eric's triple. Bumper looks awesome.

@toddclyne3493 2 жыл бұрын

Thanks

@GarcBomber 2 жыл бұрын

What's your interval recommendation on these pumps? Have only had maybe 5 hundred miles on it over the last 6 years. *New antifreeze annually...

@toddclyne3493 2 жыл бұрын

Depends who built it

@GarcBomber 2 жыл бұрын

@@toddclyne3493 it was a NOS OEM pump. Spinning 9k rpm I’d expect it to last a little longer than normal! Keep my coolant reservoir marked, belly pan clean, and ears keen. If you let these triple/triples get greasy, it makes it that much more difficult for preventative maintenance.

@GarcBomber 2 жыл бұрын

@@toddclyne3493 just curious from datapoints on how long these were typically lasting from the factory, a lot of variables but median averages from good sources like yourself are a great reference.

@timnalipinski4626 2 жыл бұрын

Right from the factory I've been told they were supposed to last 3k to 5k miles, however that's provided the machine gets riden constantly, and is started off and on during off season. When they sit especially without coolant they dry out and it's only a matter of time.

@toddclyne3493 2 жыл бұрын

@@timnalipinski4626 great info and a good guideline to go by. 🍻

@brandonp132 2 жыл бұрын

Oh man... This video just potentially ruined my day. 😅😬 I bought a 2000 XCR for $500 that's in mint condition... aside from the fact it died due to what they think was the water pump failing and having it over heat. I've been prepping to do the top end but now I'm assuming this could get ugly quick.

@toddclyne3493 2 жыл бұрын

Prepare yourself for the worst. That was the same issue with this engine

@brandonp132 2 жыл бұрын

@@toddclyne3493 Luckily, and I say that reluctantly, I'm friends with Terry Gilomen down here near Northfield, who has just about everything I'll need to bring it back to life but the cost looks like it could be astronomical if it is what that is... I guess I'll start by pulling the water pump and see if it let loose or if I got lucky. For $500, it just might be worth it to bring back this beast of a muscle sled. 🤷🏻

@ntivemomspridendjoy5080 2 жыл бұрын

Triple loving freak here haha

@toddclyne3493 2 жыл бұрын

Hello 😁

@ntivemomspridendjoy5080 2 жыл бұрын

@@toddclyne3493 👋

@otahu26 2 жыл бұрын

Side note. if your using a cheap oil. Your gonna get expensive. Buy a great Synthetic oil Like Shell or Amsoil pay it now and save it later. There are people who have reviews on here of the performance of oils.

@toddclyne3493 2 жыл бұрын

Agree

@reelboss737 4 ай бұрын

Link to the pump guy please

@toddclyne3493 4 ай бұрын

His contact info is in the description

@lesterburritt2038 2 жыл бұрын

Whats going on with freedom.

@toddclyne3493 2 жыл бұрын

Not much right now. Summer project now

@jeremylibby8769 2 жыл бұрын

He was from bleeping jeeps

@toddclyne3493 2 жыл бұрын

👍

@northofhwy8180 2 жыл бұрын

Another triple project.

@toddclyne3493 2 жыл бұрын

Yepper 😁

@larrywarner9314 2 жыл бұрын

That's a $3000 fix maybe he can find good used cylinders if he's lucky I've been in his shoes and it sucks .

@toddclyne3493 2 жыл бұрын

It sure does. I was just in his shoes

@larrywarner9314 2 жыл бұрын

@@toddclyne3493 I bought a 98 srx 700 from a friend and it was supposed to be rebuilt witch it was but someone ported it and fuct up all three pistons and cylinders it coat me $2200 just for the top end so I feel his pain , and no longer talk to that friend.