Toilet Shut Off Valve Mistakes and How You Can AVOID Them

Рет қаралды 8,453

Ай бұрын

This video shares toilet shutoff valve mistakes. You'll see how to install a shutoff properly and leak-free. For more bathroom remodeling tips visit homerepairtutor.com
#plumbing #howto
Toilet Shutoff Valve Mistakes
0:22 How to turn the water off to the house
0:38 Drain the water from faucets
0:58 How to remove toilet shut off valve
1:18 Compression valve removal tool tip
1:45 How to prep copper pipe for shut off valve
1:57 Sharkbites shut off valve installation
3:23 Compression and PEX A shut off valve tips
These supplies were used in our video:
-Pasco Compression Sleeve Puller
-AutoCut Pipe Cutter
-SharkBite Shutoff Valve
-Oatey Megaloc
Some product links may be Amazon affiliate links. As an Amazon Associate we earn from qualifying purchases at no additional cost to you.
Want our newest DIY videos? Subscribe to our channel and hit the notification bell to see every upload. We upload new videos every Saturday.
Disclaimer:
Videos produced by Home Repair Tutor are provided for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. Home Repair Tutor does not make any claims of the safety of the projects, techniques, or resources listed on this site and will not take responsibility of what you do with the information provided by this site. Viewers must be aware by doing DIY projects on their homes they are doing it at their own risk and Home Repair Tutor cannot be held liable if they cause any damage to their homes. Home Repair Tutor cannot claim liability with all applicable laws, rules, codes and regulations for a project.

Пікірлер: 22

@HandymanLand Ай бұрын

Great video👍

@HomeRepairTutor Ай бұрын

Thank you 🙏

@AndresMorales-zm9yr Ай бұрын

Muy bueno tu video, bien explicado

@HomeRepairTutor Ай бұрын

Gracias 🙏🙏🙏❤️

@SchurrAquatics Ай бұрын

Love it!! I have a few i have to replace so this is perfect!

@HomeRepairTutor Ай бұрын

You’ll rock it out buddy 🙌🏼🙌🏼🙌🏼

@TR4Ajim Ай бұрын

It’s also a good idea to replace the toilet supply line as well. They usually have some type of compression O ring or plastic washer that are designed to be tightened once. Also if the supply line has been in place awhile, those seals will harden and not seal well if reused. Cheap insurance.

@HomeRepairTutor Ай бұрын

Great tip 👍🏼

@randallsmith7885 Ай бұрын

How long does a sharkbite connection hold pressure?

@HomeRepairTutor Ай бұрын

It shouldn’t fail if the pipe was prepped properly. I’ve had several last 10 years with no leaks, and they were still working perfectly. I’m not saying I use them exclusively. I like compression valves and PEX valves as well.

@rzh3443 Ай бұрын

I have had them over 15 years with no issues. In Australia (where they were invented duringWW2) and Europe they are used a lot. The key is to prep the pipe and mark the insertion depth to ensure you get it on the pipe the full amount .

@michaelsmithers4900 Ай бұрын

Don’t forget to flush the toilet first and hold the handle to empty the tank👌

@troyhomann533 Ай бұрын

I really enjoy this person’s videos but I would have done things a bit differently. I wont comment on that because the man is trying to help others. I think. Been plumbing for over 30 years. Fact is , three plumbers couldn’t come up with three different solutions for the same problem. For example, I don’t care for push ( sharkbite ) fittings. Maybe I’m old fashioned. Thanks for the post. Keep it up.

@jose2226 Ай бұрын

You should share. Those are the best kinds of comments I think, you might help someone down the road, which as a handyman should be something you're used to

@sorsha_sky Ай бұрын

I think you meant to type that 3 plumbers COULD not couldn’t )come up with 3 different solutions. But I could be mistaken

@BillHart46 Ай бұрын

And after you do all of that the toilet still won't flush! One little, but very critical, step what's left out. lol

@HomeRepairTutor Ай бұрын

It will flush if there’s water running from the valve to the tank. If your toilet doesn’t flush properly, it’s likely a fill valve problem, venting problem, or obstruction.

@BillHart46 Ай бұрын

@@HomeRepairTutor it is a valve problem. And not the one that you replaced. You left out a very critical step.

@sorsha_sky Ай бұрын

@billhart46 Don’t keep us in suspense… what was the very critical step left out?

@BillHart46 Ай бұрын

@@sorsha_sky @HomeRepairTutor Turning the main water valve back on!

@sorsha_sky 24 күн бұрын

@@BillHart46 😄