A big thank you to everyone who stops in and watches our videos on everything from ridiculous stuff like this to data driven and comparative. Appreciate everyone who has subscribed as well to board this crazy train.

LS swapping a 1/2" impact would be ridiculous! Obviously, you should LS swap the D-Handle instead.

It's at this moment in the TTC channel history I realize they are going to turn into a "Hold my beer and watch this" type of channel sometimes...and I'm here for it!

Not sure if you guys realize this, but some of us power tool engineers from the major brands are paying attention to this channel.

I was watching this wile sitting on the throne and cheered loudly when the gun broke the 1000 ft-lbs mark..... my wife came and asked if everything was alright

That Makita looks even more impressive when you see what's needed to beat it..

Anyone remember seeing people put V8 on a chainsaw and seeing who can cut a log the fastest? this feels like the start of a new sport lol.

I wouldn't mind seeing you pull the hammer n anvil out of it after it's nos run just to see how beat up it got. Awesome as always

This is the perfect physical manifestation of the mythical entity known as the Tool Man. Some say that at full beans, you can hear a subsonic man-grunting noise beneath the screaming.

Imagine an apprentice showing up for their first day with this thing.

🤣 holy crap, Just seeing that mountain incline when the NOS hit and how much death shake that machine was showing was too much.

9:43 "And how is that 1/2" anvil in one piece". Asking similar questions through the whole video. >.< Keep being crazy you guys. Love it.

Dude that velocity stack in the thumbnail caught my eye, that is HILARIOUS! It looks like it belongs on a car and not on an engine that could fit in a backpack!

imagine bringing that thing in for warranty XD. TTC: oh our anvil's worn out.

RC nitro fuel. It's usually about 10% mineral oil, 70% methanol, 20% nitro. You can get it with just about any % of nitro in it. 60-80% is usually used in boats with water cooled heads. . Make sure you put a fuel cutoff because it may end up dieseling. You can get it at a local hobby shop or online. $20/quart.

Use a motor from a competition chainsaw. If it can run a 3-4 foot bar saw, it should break the current torque record as well.

Racing chainsaw, or the smarter "no replacement for displacement" option of a dirtbike engine... on the railway impact.

As far as the rail gun goes, I would bore it out, port, polish and pipe it to see how many beans you can squeeze from it while retaining it's stock form factor

So it went from an "M60" to an "M60 (Nightmare) FUEL"?

Tim Allen would be proud. Once you said "Safety first", I started grinning and laughing so much that the girlfriend had to inquire what I was really watching. You guys are doing the things I always thought would be awesome to try. Keep it up.

Fabulous madness!! Can’t wait to see what you come up with next… I loved the way (at 4:15) all the other impacts were vibrating across the bench in excitement when you showed the test shots in Logan’s workshop

You have created the Widowmaker of impact tools. Just like the old Kawasaki, lots of dudes will want to have the hottest tool in town.

I literally lol'd at "LS Swap it" 🤣🤣

This was awesome! I love the mix of legit scientific testing with the occasional balls-to-the-wall monstrosity like this. So much fun and it's been awesome to see the success of this channel. Well done and keep up the great content!

I hope this series never ends. In a few years I hope you are hooking up car engines to a 1 inch impact to see what it does!

I feel like you need the stage 3 to deal with Mercedes head bolts

I lost it when he said “Motorcycles nitrous if she have too”. I’m really proud of your dedication to this quest.

"Black Friday deal - buy an M60 NOS insanity wrench and get a free engine stand!" Some top notch engineering right here 🔥🔥🔥

Is there now going to be a "Top Fuel" division for your rank charts?

Clicked on this instantly, this is gonna be good!

Re: the "how to get more power" idea, RC 2-stroke engines burn ~30% nitromethane mix. Just an idea.

I like how in the opening scene the other impact drivers were backing away like “ whoa dude I’m outta here”! 😂😂

Absolutely brilliant! Love what you guys do normally on your channel, but this is just fantastic 👏

Also immediately clicked ,Torque test channel my favorite! Let er buck boys

By far the coolest unnecessary project I've seen in this platform 😂😂 I love it

Knowing how those off the self 2 cycle engines are built... I am impressed that you didn't blow the jug off the crankcase, or that the connecting rod didn't break. Let alone the crank. Sure hope you'll have your safety glasses on 🤣

I Was Honestly Waiting On The Planetary Gears To Shell Out. Or The Hammer Anvil To Explode! Thank You Gentlemen For The Great Content 👍 Next Stage 4 You May Want A Blast Shield For Your Protection 😂

With technology I wonder how long it is going to be before we see a rechargeable battery give the same results. This video had me laughing the whole time. Love your twisted thinking.👍

I love to see the people behind my favorite KZfaq channels also watch some of my other favorite channels! You're doing great work answering the questions no one has thought needed asking yet!

you should try making a ¾" Milwaukee gas gun with the exact same engine to see how much more torque it would make compared to the ½" version

A real frankenstein with some super power. Love your experiments and the results they produce. Happy to see you all reaching 200K in no time. Keep up the great work. 🙂✌❤

Wow that was cool to see no doubt, and it was impressive to see the results as well. However, the real impressive part was that you were willing to hold that thing and run it on that Dyno multiple times, each run even more sketchy than the previous one.

As a fan of power tools and two strokes, thank you

I stand in awe of your ingenuity and mild safety equipment

Part of me wants to say try a Stihl chainsaw engine, one of the larger ones since they're already setup for a max sustained torque load for running chain through hardwood. Would probably make good beans kinda where it needed to right out of the box without a whole lot of fine tuning

I wish I had this the other day. A Ram 1500 came in and one lug was overtightened by *a lot*. My Ryobi p262 couldn't get anywhere close at full beans- needed help with a long breaker bar and a strong co worker and even he struggled...

This was awesome. I Love this over the top series you guys have going on. I can’t wait for you to hit 300k subs so we can see what’s next

I didn’t know I needed this enjoyment in my life until this popped up in my feed. This is great!

That was impressive. Well done!

I'm shocked that the impact components didn't grenade 🤯

This was like 3, bad ass videos in one. Thanks fellas. Excellent content.

Spicy beans and sketch factor, a recipe for greatness

Love the videos keep them coming and heres a idea maybe do a more powerful brushless motor with a vfd running off 115volts or 220v

I now have to wonder two things. First, if you could increase or even double IPM how much does it increase capability. Second, if you increase RPM at the motor..... could you fabricoble 120volts worth of battery cells into something M12 sized impact and hit 25,000 rpm motor speed resulting in much higher IPM?

By far your funniest, coolest and most dangerous video to date. Congrats and thanks!!!

I am impressed! Hard to believe the internals of that impact survived that treatment. Now I need to start looking into small motors to have some fun.....

If you do away with the "must be hip luggable", and "is something you can get your hands on", you could see if Koenigsegg will lend you one of their 3-cylinder 2.0 liter engines. That dumps 600 horsepower and 443 lbs-ft of torque at 70 kg. Or if high RPM is the goal, maybe see of Rob Dahm has a small rotary engine he'd lend you?

Just a quick question. At work we have to take a cage apart on a screw press (1" drive 60 something mm socket.) We use air tools. Could you compare air tools to cordless? I don't think a cordless would survive the 50 odd nuts per press on a single battery but it would be interesting (for me anyway) to compare torque, old school to new.

I love the channel and your videos, are the fact that you try to keep everything equal. Keep up the great work.

Wtf?! Love it 🥰

Id love to see what you could do with a bigger motor and a 1 in milwaukee D handle impact wrench! Just why not lol

This deserves a "Real Men of Genius" award!! Love it!!

Did nothing but smile and laugh the whole time! Love all the content but this was awesome!

I think if you guys started with a 1" impact with the extended anvil you would have had a lot more power.

I feel like a turbo could help, especially when hard under load, seeing as the rpm jumps pretty early, and the nitrous can be sprayed in to give it more of a kick, I think a turbo wouldn't hurt down low, but easily help push it further in the mid to top range torque

I haven’t laughed harder at at YT video in a while. Excellent work. Thank you.

Oh this was fun. Thanks for the great content TTC.

THIS is the second thing the internet was invented for, boys!

So I'm slightly confused about the differences in "static" torque measured vs TQ @ RPM. What you described sounded much more like horsepower than torque when you do your measurements, but obviously I'm missing something. I might have misheard you, but I thought you said you basically sum/integrate the torque over time and factor in RPM to get the "max" torque on your plots. But that doesn't make complete sense to me as that number would just increase based on duration. If someone has a good article on this, that would be great as I get confused between the relationship of what I guess is called "dynamic" torque vs. "static" torque and how RPM factors into all this. Gear reductions aside, I thought the TQ to RPM relationship given on Impact Wrench e.g. (200 ft-lbs @ 1500 RPM) was analogous to the torque rating of an engine. And that reductions aside, whatever that number was would be the "max" torque measured or the highest torque value you could break free.

This Channel and Project Farm are really the true heros.

This is the coolest test ever.

What I think would be the next awesome evolution of this is to put a car electric motor on it, maybe a Tesla, that way you get the torque and high speed.

Although fun as hell, in 10 years this video will be shown as an example of our fossil fuel madness.

"Hey, can I borrow Your impact wrench?" "Sure, but remember not to leave the choke on" "what"

You guys are nuts! I love it!

After some investigative work, I feel this channel (TTC) is bias towards this one's manufacturer (TTC). Take those rankings with a grain of salt. COINCIDENCE TTC ranks theirs high?! I think not!* *sarcasm for those who don't pick up on it.

Ok. Adding nitrous is just beyond awesome! Outstanding!!

When I saw the video title I thought of Cleetus. Man I was not disappointed! You should look into upgrading to any kind of 4 stroke engine on the next version for sure as well. I don't care what you put on any other impact gun because it will be freaking awesome🤘Keep it up guys!

Just found this channel, and super happy to be part of your 200k subs!

Excellent job Mr Frank n. Stein I like the idea of the Milwaukee, they are very tough tools and it just goes to show what they will put up with. I run the older 18 volt stuff and I'm had very good success with them thanks for sharing. Bob from Virginia USA

I started to smell 2 stroke smoke in my room after you turned it on, wow

Love the Cleetus reference :D great video!

That’s one fun project. Impressive!

What an awesome Video and Test. This is proof that a goal, some money and someone saying it cannot be done, is all you need to accomplish something pretty cool. If it was put into mass production, it would probably need a Kevlar wrapper. Impressive what the Milwaukee Internals can take. I also like that you still logged it with the other equipment, no bias. 👍🏻👍🏻

That was awesome, and hilarious!

you guys are insane , brilliant, love it.

300k subs can't come quick enough. I can't wait to see the next creation you guys come up with.

After a horrible day of life,I randomly found this channel. Definitely brought a smile to my face.

We never expected a nuclear powered 1/2" impact gun tested, but we the viewers were ready for this moment of history!

This...this is one of the most beautiful things I've ever seen.

I absolutely love the Cletus callback😂

This is one of the most metal things I have ever seen 🤘

Tim the tool man Taylor would be proud!

i barely even use a 1/2 in impact and get away with using a kobalt xtr when i do but now i wanna build one of these just to build it out at the dragstrip to change out tires just to see how many heads turn absolutely love this series keep it up man

I like how you have the exhaust blowing directly in the user's face.

I like your approach on your video layout . Thanks for not copy and paste like everyone else . You got my sub

Awesome video. Great job. Live confidently and peacefully

Two channels who must never meet, lest hilarity ensue. Gray still plays and Torque test channel ALLLLL OF THE ZEROS!

The TTC should have several millions subscribers. These guys are having too much fun. I'll check in next Friday.

You absolutly love to see it !