Toyota 3K Carb to Suzuki Samurai Installation kit Product Review
Рет қаралды 31,315
5 жыл бұрынHey y'all, in this video I do a Product Review of the, Suzuki Samurai 1.3 liter to Toyota 3K Carburetor Swap Kit, that you can get off of eBay.
Direct contact Email Address for Gary Scantlin:
Gary@certifiedmachine.us
www.certifiedmachine.com/
Suzuki Samurai 1.3 liter to Toyota 3K Carburetor Swap Kit: rover.ebay.com/rover/1/711-53...
Toyota Corolla 3K Carb: rover.ebay.com/rover/1/711-53...
Suzuki Samurai Service Manual: rover.ebay.com/rover/1/711-53...
If you would like to help support the channel check out ELK Motorsports Patreon Page:
/ elkmotorsports
Equipment I use to make videos with:
Canon G7 X: amzn.to/2I5KxZm
Panasonic G7: amzn.to/2qUrc7K
GoPro Hero 6: amzn.to/2I7QqFe
SD Micro: amzn.to/2I4rIWt
SD Card: amzn.to/2qUT8sd
SunPak Tripos: amzn.to/2r0cUTd
Manfrotto Tripod w/ fluid head: amzn.to/2I5S5LN
Rode Video Micro: amzn.to/2HNaqkC
48" Camera Slider: amzn.to/2HFGTt9
Welcome to ELK Motorsports. My name is Trey Koepsel and on this channel the content will be mainly centered around the Suzuki Samurai. This content ranges from installation videos, DIYs, product reviews, varying levels of fabrication, as well as diagnosing and repairs videos. The main focus of this channel is to entertain, educate ( me as much as you), and most importantly have fun. If you enjoy fabrication, automotive modifications, and being entertained, then SUBSCRIBE to the channel to stay up to date on what I've got going on in the shop. So with that all said welcome to the channel.
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, ELK Motorsports receive a small commission at no extra charge to you. This helps support the channel and allows me to continue to make videos like this. Thank you for the support!
Channel Sponsors:
Zuks Offroad
Camp Verde, AZ 86322
(928) 567-3061
ZuksOffroad.com
Zuks of Hazard
382 CR 3662
Splendora, TX 77372
(832)9186169
Pro Stickers
5488 S Padre Island Dr
Corpus Christi, TX 78411
(361) 452-2840
@jeffwilliams5619 5 жыл бұрын
Ok well thank you sir for getting back to me, I found him & he got right back to me. Cant wait to order this & install it. Love your channel dude!
@brandonhowell6328 5 жыл бұрын
Gary and his kit is a good one. He takes care of his customers too. I’m definitely a repeat customer with him and will continue that way.
@ELKMotorsports 5 жыл бұрын
Yeah I was very impressed with the kit!
@papafred501 5 жыл бұрын
I really want this. Just bought an 86 and I’m super excited to start building on it. Btw all of your videos are such good help, thank you.
@ELKMotorsports 5 жыл бұрын
Mark Brown , I'm glad they are helpful
@alfredstaude3955 5 жыл бұрын
Hello Trey, this is a really good budget resource. Thanks!
@agoogleuser7784 5 жыл бұрын
I’m so pumped to see the dyno numbers on these different carb set ups!
@ELKMotorsports 5 жыл бұрын
a google user me too
@suzukisamurai9362 5 жыл бұрын
Just installed mine thanks for all the detailed information you give mate happy New year all the best 🎉🎊
@ELKMotorsports 5 жыл бұрын
Your very welcome!!!
@chuckkerns6320 5 жыл бұрын
looks to be a well built kit for the money. keep up the great work
@ELKMotorsports 5 жыл бұрын
Chuck Kerns, thanks. I really think it is.
@magdiel007 3 жыл бұрын
I got one in NZ, installed it, very easy install, it goes very well, starts first pop, and goes hard. Pity the postage let them down, went to japan and back like 2 times, lol. No bad lag or cut out the old one had. Good deal
@olyndasams5327 5 жыл бұрын
Hey thanks for the info on this,I just installed mine today with the kit. It would be cool to see an install video or at least a quick recap on this.cant thank you enough for the footage you’ve put out
@ELKMotorsports 5 жыл бұрын
This will be getting installed on the budget build as soon as I get the stock setup dynoed
@olyndasams5327 5 жыл бұрын
Can’t wait to see the results, mine has more power and I haven’t perfected the art of tuning carbs so I’m sure there’s more to be had from this.
@alexisssyeehaw6504 5 жыл бұрын
IM YOUR NUMBER ONE FAN
@ELKMotorsports 5 жыл бұрын
Alexis Patterson, thank you so much Alexis!!
@ruckusjams 3 жыл бұрын
Great info in this video. Thanks, just ordered the carb and kit. Is the install in one of the build videos?
@ELKMotorsports 3 жыл бұрын
Not yet, I've been really bowed up this past yr, and as a result I haven't even touched ether Sammy. My plan is to get back into the groove and pick up were I left off though
@AGuidottiR 2 жыл бұрын
Great video, but i'm wondering about what is the improvement for tue Zuk?? i've seen a couple of videos talking aout this swap; but there is some mileage upgrade? more power? i hope so. This swap looks easy to DIY.
@bigbossbyu2755 4 жыл бұрын
Wow. Seriously thank you so much for the vid. Was just gifted my dads total stock 86 Zuk!! It sat on the side of the house for almost 2 years but still runs great except for some issues with the fuel/carb system. Literally almost spent 3-4x the amount for a CV Myside carb and kit but decided to go the more convenient route and purchased the 3K carb and install kit from Certified Machines. So stoked. I’ve driven this guy hundreds of times over the years but now that it’s mine I can’t wait to get to building it up as my daily/weekend warrior with these Utah trails here. Again thanks for the video and your channel in general. I’ve never been great with tools/mechanical work, but these past 2-3 years I’ve learned so much just from helping my dad with the Samurai on and off. The last 5+ years I’ve been looking around for more help/info on these Zuks and your channel is exactly what I wanted to find! How has everything held up since posting this video?
@ELKMotorsports 4 жыл бұрын
Honestly I haven't done much. I've been working some crazy hrs (yesterday was an 18hr day) but I've had the samurai and the channel on my mind, and want to get back to posting vids.
@billpascoe9655 5 жыл бұрын
Thanks for the quick reply, well appreciated. I know you mentioned on your review video that you didn't feel it necessary to do the replacement. My mechanic skills are limited even though I'm a licensed Industrial Electrician and would love to see just which vacuum hoses are removed and if only vacuum advanced is used and if so does the timing change from the specks. I'm from a small Rural Town so any technical help here is limited so your expertise would be welcome. Thanks again for your educational videos. Bill
@ELKMotorsports 5 жыл бұрын
Bill Pascoe , if your talking about the 3K it actually does have enough progressive vacuum tio run the vacuum advance. So you don't need to hook it up.
@2012escapee1 2 жыл бұрын
My Weber kills the engine on a steep slope. My mechanic says it's because the float valves are on the wrong side. Would a Toyota 3k solve that problem?
@TheAlaskaCajun 3 жыл бұрын
yo man, it looks like you stopped posting on youtube and FB. Hope everything is OK. I bought this carb set up on my samurai, and was hoping you would do a follow up install and set up video.
@whatisdreup2 Жыл бұрын
That screw at the end is to hook the throttle cable knowing it end of it dont fit to those carbs lol
@jeffwilliams5619 5 жыл бұрын
You said he was on FB??? I looked but found sever Gary Scantlins. Do you know which one? I'd love to jump on this kit. Loved the video!!!!
@ELKMotorsports 5 жыл бұрын
I put his direct contact info in the description of the video, now you should be able to email him directly.
@jeffwilliams5619 5 жыл бұрын
Thanks Dude, did you have a video of you installing it? Do you like it?
@ELKMotorsports 5 жыл бұрын
Jeff Williams, not yet I haven't installed it.
@patrickbourgeois7215 5 жыл бұрын
Mine worked great still put the oil filter o-ring too on top of the spacer for proper fit of stock breather. But worked flawless I loved it saved me a ton of running back and forth to a hardware store... BTW the screw and nut is for the throttle cable the keeper block on the sammy is too big for the 3k so that allows you to put that bolt and lock nut where the keeper would go putting the keeper though the throttle housing past the keeper so the bolt holds it in so it cannot come out. Only other way is to drill out the throttle cable bracket on the 3k
@ELKMotorsports 5 жыл бұрын
Patrick Bourgeois , that’s what I figured the bolt was for. Thanks for letting me know.
@bogsferrer8925 3 жыл бұрын
Hows the performance of the 3k carb now?
@bryanmarcelino5667 5 жыл бұрын
Hi Thank you for all your videos!!! Will i pass smog in CA if I change my original carburetor to the 3k? And will the 3k fit my 1988 samurai?
@ELKMotorsports 5 жыл бұрын
Bryan Marcelino it will fit your 1988 zuk, but it deletes all the emissions on the truck, so it won't pass a smog.
@juliosarabia5541 Жыл бұрын
How it behaves on the ups and downs on the road?
@OBHOBBY 8 ай бұрын
Hello sir, how much to set the air mixture screw 3k carburettor on the samurai? It is open 1 and half rotate or how?
@Z-Bart 2 ай бұрын
$100 five years ago. Wonder what they cost in 2024? Looks like a great kit.
@micklaporta4503 5 жыл бұрын
were there no install instructions with the kit ? great vid
@ELKMotorsports 5 жыл бұрын
not in mine, but I know that the kit does come with instructions.
@nunyabiznatch9312 5 жыл бұрын
Just picked up a 3k and will order the rest of the kit soon, but have a question: what does one do with the evap/charcoal canister line for the carb? This would also apply to a Webber, no? Can I plumb it into the air filter housing?
@ELKMotorsports 5 жыл бұрын
If you want to keep it you could, but the two ports that are already there use a different type of mechanism than just standard vacuum due to the fact that they are used for operating the flap to allow hot air from around the exhaust manifold for helping warm up the motor. You would have to add a port to the box or the into the pcv line that is running to the air cleaner box.
@riseandshootrecreations6524 3 жыл бұрын
Where’s the install video? I’m a rookie here and could definitely use the help! Thanks!
@richardt.4224 Жыл бұрын
Great video 😀 But the music was/is a pain!
@suzukisamurai9362 5 жыл бұрын
Great review but do you get any difference in performance because I have an su carburator and the engine is a bit rough and after seeing this I'm thinking about getting one
@ELKMotorsports 5 жыл бұрын
suzuki zuk , ppl say it's better but there isn't any dyno numbers out. You really do this to get rid of the finicky emissions that are on the truck stock.
@suzukisamurai9362 5 жыл бұрын
Thanks for the reply man I appreciate the info 👍
@julesgaudin5844 2 жыл бұрын
Best budget air cleaner to get ?
@johndudley5987 5 жыл бұрын
Very interesting Trey been thinking of another set up I’m not liking my Weber with the water choke. 👍. What does the whole thing run carb and kit if you don’t mine.
@ELKMotorsports 5 жыл бұрын
the carb is $50.40 kit is $87.50 plus $10 for the stock intake spacer
@johndudley5987 5 жыл бұрын
$165 I think you said
@ELKMotorsports 5 жыл бұрын
yeah the carb I linked in the description is $10 cheaper than what I payed for mine.
@iulica1691 3 жыл бұрын
Hi there!! 4K , 3k or weber 32/36 carb for my g13a sam?
@micklaporta4503 5 жыл бұрын
just wanting to see if youve had any progress on the install, thanks
@ELKMotorsports 5 жыл бұрын
mick laporta, I'm picking up the budget build this weekend and bringing it to corpus. This is the truck in going to install the lights on. So I can get to installing them. I've also got the relay harness I like to use in Houston as well so I'll pick them up while I'm there.
@jonathanbrain9789 5 жыл бұрын
What kind of power increase over stock carb? Compared to a weber carb, which would be best for a daily/light off-road use? Thanks, Love the Channel
@ELKMotorsports 5 жыл бұрын
that is something that I'm going to find out. I'm in the Houston area for work and trying to line out a day , trailer, and street tires so I can take the BB to the dyno and get a base Hp on the stock carb. Then I'll do an installation of the 3K and then dyno it. I also have a Weber that I can do an install of then dyno run, and then a CV install and dyno. This is the plan anyways.
@jonathanbrain9789 5 жыл бұрын
Awesome, looking forward to those vids.
@WanderingDad 5 жыл бұрын
I'm definitely interested in the torque curve. Not sure I can tell 40hp from 41, but torque is like Christmas. More early, more better. Also it's over 200 degrees in Houston right now, please include a power correction for the rest of the world.
@ELKMotorsports 5 жыл бұрын
lol Yeah, its pretty hot here
@EivinSukoi 5 жыл бұрын
xHECKx lucky you guys , it’s here 460 degrees , humid as hell . Greetings from Matagalpa , Nicaragua.
@jacktrade3746 4 жыл бұрын
Hey, thanks for your video, the link to the swap kit doesn't exist, do you happen to have the updated link to where I can purchase? Thank you.
@ELKMotorsports 4 жыл бұрын
You can actually get everything from www.certifiedmachine.com
@1shotbarbeque881 5 жыл бұрын
So I found an 88 Sami. Mod jmb422j it is an unmolested barn find .parked in 03.. stock carb is gushing fuel from the little black boot on top pass.side.😳 should I rebuild it. Or go with Toyota, harley.? It's going to be a weekly driver..hunt rig ..what would you do..thanks for any info .love your channel..👍
@ELKMotorsports 5 жыл бұрын
1shot barbeque, so it comes down tio how much you want to spend. The Toyota 3K is a great setup for less. You can get everything you need from Gary Scantlin off of Facebook. But he's had been having trouble getting the carbs themselfs because of the new import taxes andtariffs. Best performance is going to be a MY-Side with a 40mm carb naturally aspirated / 44mm future turbo build. Either of these I would do and I have done. The choose is yours. The stock carb is also a great carb but with a rebuild being approximately $300 you might as well go MY-Side of emissions isn't an issue
@davidashbrook5624 Жыл бұрын
How do I get the kit..is it on ebay as kit for 3k carb for suzuki can not locate thanks Dave A
@whitewolf9299 2 жыл бұрын
The bolt you couldn't figure out is for the throttle cable.
@martinrivera9575 Жыл бұрын
What's the name of the kit for the 3.k cabulator I got a samurai
@EivinSukoi 5 жыл бұрын
Yo dawg Quick question , will this carb set up work on a 1.3 l motor ?. I own two Zucks both with a 1.3 l , I can do 0 - 60 in two weeks .
@ELKMotorsports 5 жыл бұрын
It's intended for the Suzuki Samurai 1.3L motor.
@daviddavenport4766 2 жыл бұрын
Where can I find this adapter kit ??
@lesterrodriguez5833 4 жыл бұрын
Hello l have a 1988 and half suzuki samurai, l want to install the 3k carburetors but l don't find the kit in ebay you know where l can find it,,thanks, excellent video
@ELKMotorsports 4 жыл бұрын
www.certifiedmachine.com/
@johnkoga1 7 ай бұрын
Beste ..waar kan ik deze carburetor en kit bestellen...mijn Samurai is van het bj.1992 ..1300 cc..
@jeffwilliams5619 5 жыл бұрын
For some reason I stopped getting videos from you on KZfaq. Did you do your swap yet? If so is there a video?
@ELKMotorsports 5 жыл бұрын
Jeff Williams you probably haven't got a video yet because I haven't put anything out in a while. I apologize for that. But it will be coming soon.
@johnwil5397 5 жыл бұрын
hello, Im john from bolivia, go ahead
@EivinSukoi 5 жыл бұрын
John Wilder Tito Silvera Hello John , this is John from Nicaragua nice to meet you mate .
@Aerialit 3 жыл бұрын
Were is the idle jet
@dr.isaaccg959 5 жыл бұрын
and the installation ??
@herguzboy 3 жыл бұрын
donde lo puedo encontrar actualmente? el link está roto amigo
@fujitsubo3323 5 жыл бұрын
how does the fuel cut solenoid work on this 3k carb ? i know the 4k has a plug hanging off it you hook 12v up to but i cant see anywhere on that carb where the fuel cut solenoid would be ?
@ELKMotorsports 5 жыл бұрын
The 3K doesn't have one. But it is machined to accept one, the area is blocked off with a plug.
@fujitsubo3323 5 жыл бұрын
@@ELKMotorsports but is it needed for the car to run smoothly ? The stock carb has one.
@ELKMotorsports 5 жыл бұрын
fujitsubo no, the carb runs fine without one.
@billcampbell9949 4 жыл бұрын
cant find any contact info for carb mounting kits at ebay or certifiedmachine.us any new info thanks Bill
@ELKMotorsports 4 жыл бұрын
www.certifiedmachine.com
@mariomaldonado9467 3 жыл бұрын
Not find on ebay need part n.
@milleniumclub827 4 жыл бұрын
just installed mine, it doesnt start my engine, i have electricity from the candles, fuel is coming into the carb, but no start..;sad
@ELKMotorsports 4 жыл бұрын
MILLENIUM Club have you sprayed starter fluid down the carb? Mr not be getting enough fuel
@anandkvinu2832 4 жыл бұрын
Hey can i seal all the lines except the vacuum advance .my stock samurai carb wont alloy my engine to idle..it stalls when i manually tries to idle.
@ELKMotorsports 4 жыл бұрын
Anand K Vinu, ppl have done this to eliminate all the emissions from the truck and have run the stock carb, but I should warn you that your gas millage will suffer, and this could cause the motor tio run rich and/ or lean. Which both are not good to run for an extended period of time.
@anandkvinu2832 4 жыл бұрын
@@ELKMotorsports i should buy a new carb right?
@billpascoe9655 5 жыл бұрын
There was no mention on what years it works on. I have a 1988 Samurai and before but looking for more information. Also any input on the Toy-250 replacement for 1986 to 1988. Thanks for your videos good stuff.
@ELKMotorsports 5 жыл бұрын
This kit will work on any carbed samurai. From what I can tell, the TOY-250 is like a replacement for the stock emissioned controlled carb. It maybe very similar to this one.
@billpascoe9655 5 жыл бұрын
@@ELKMotorsports Thanks for the quick reply, well appreciated. I know you mentioned on your review video that you didn't feel it necessary to do the replacement. My mechanic skills are limited even though I'm a licensed Industrial Electrician and would love to see just which vacuum hoses are removed and if only vacuum advanced is used and if so does the timing change from the specks. I'm from a small Rural Town so any technical help here is limited so your expertise would be welcome. Thanks again for your educational videos. Bill
@juanbeltran3634 4 жыл бұрын
Hey man do you have a video of setting this 3k??
@ELKMotorsports 4 жыл бұрын
, no not yet
@juanbeltran3634 4 жыл бұрын
Thank you
@raulbc6643 3 жыл бұрын
eBay links are broken
@owenjones8075 5 жыл бұрын
Clicking on the link for the swap kit it says the item is no longer listed.
@ELKMotorsports 5 жыл бұрын
Owen Jones I'll have to update the link
@owenjones8075 5 жыл бұрын
ELK Motorsports thanks!
@dannynorth194 5 жыл бұрын
What do you do with coolant lines on the back of the carb?
@ELKMotorsports 5 жыл бұрын
Danny North, on the stock carb?
@dannynorth194 5 жыл бұрын
Got it figured out man just re route them together talked to the guy who made the kit on facebook! Need to go ahead and put yours on it runs great!
@ELKMotorsports 5 жыл бұрын
Danny North, yes. I'll bring the truck to corpus and I'll dyno the stock carb and then put the 3K on and dyno it.
@padenstone4282 5 жыл бұрын
Do you have to adjust on the carb after installing ?
@ELKMotorsports 5 жыл бұрын
Paden Stone, you will defiantly have to adjust your idle, after the engine is warm.
@padenstone4282 5 жыл бұрын
No mixture screws? Just idle screw?
@ELKMotorsports 5 жыл бұрын
Paden Stone, there is a mixture screw that thou set with a vacuum gauge
@padenstone4282 5 жыл бұрын
Thou as in me? Or they already set it?
@ELKMotorsports 5 жыл бұрын
Paden Stone, you. Sorry for the typo. But they come very close to set already.
@runnikcatti5997 4 жыл бұрын
The ebay link for the kit you posted is a dead end :( Is he still selling them?
@ELKMotorsports 4 жыл бұрын
www.certifiedmachine.com/
@runnikcatti5997 4 жыл бұрын
@@ELKMotorsports thank you amigo!
@fujitsubo3323 5 жыл бұрын
4k vs 3k carb, for my 1992 tin top serria with the g13ba i want reliability.
@ELKMotorsports 5 жыл бұрын
3K appears to be the best carb for reliability. www.certifiedmachine.com/ offers a carb that they have worked through that just bolts up and runs without any fiddling.
@fujitsubo3323 5 жыл бұрын
@@ELKMotorsports thanks dude appreciate it, I'm going to try install using this kit on my right hand drive serria 😂😂 wish me luck
@ELKMotorsports 5 жыл бұрын
fujitsubo you got it.
@tracertyco 5 жыл бұрын
I have searched on eBay and it looks like the 3K carb conversion kit does not come with the Air Cleaner Spacer anymore. It looks like it is sold as a separate kit by itself, however the Air Cleaner Kit does not seem to be listed anywhere on eBay either. Does anyone know where else I can get this spacer kit? I am not on Facebook so I am not sure if the guys who made this kit has another website that I can purchase their air breather spacer from. Thank you.
@ELKMotorsports 5 жыл бұрын
tracertyco I'll talk to Gary and see if I can get some contact info for y'all.
@ELKMotorsports 5 жыл бұрын
You can email Gary Scantlin directly for ordering the kit & air cleaner adapter at: Gary@certifiedmachine.us
@tracertyco 5 жыл бұрын
ELK Motorsports Thank you for the reply! I already talked with Gary and boy is he helpful. Now I have a new dilemma! I am seeing fuel seep past the fuel plunger on the 3K carb. I put a little red rtv around that to see if it stops. If it doesn’t then I will have to find an alternative solution! I am not sure if I need a fuel regulator or not? What are your thoughts on a fuel regulator for the 3k? Im not sure how much pressure the new carb is seeing.
@ELKMotorsports 5 жыл бұрын
There have been some guys on facebook talking about how the 3K carbs that you get off of eBay for real cheap have some problems with them, and there is a guy that gets them and fixes them and is selling them. its kinda of hit or miss with the ones that you pick up off the enterweb.
@tracertyco 5 жыл бұрын
ELK Motorsports thanks man I appreciate your input and help! I might just buy a rebuild kit from Rock Auto. Gary had mentioned in one of his emails to me that I should not buy the Auto Zone version re-build kit because the plunger is the wrong size or type.
@1shotbarbeque881 5 жыл бұрын
And how do I determine what kind of carburetor it is that's on it now
@ELKMotorsports 5 жыл бұрын
1shot barbeque OMG allot of research. If you entail me pictures I'll try to help you the best that I can. Could even call and talk to you
@1shotbarbeque881 5 жыл бұрын
@@ELKMotorsports thanks partner
@ELKMotorsports 5 жыл бұрын
1shot barbeque you're very welcome
@micklaporta4503 5 жыл бұрын
did you say where you got the carb from
@ELKMotorsports 5 жыл бұрын
mick laporta, in the description of the video I have a link to the carb on eBay.
@micklaporta4503 5 жыл бұрын
sorry thanks
@ELKMotorsports 5 жыл бұрын
mick laporta it's no problem
@grigorsch158 2 жыл бұрын
Can i put this carburetor on a 1,6 8v?
@ELKMotorsports 2 жыл бұрын
Yeah, there isn’t much different between the 1.3L 8v and the 1.6L 8v. I think it’s just a slightly longer stroke on the 1.6L, like by 10mm or something like that. You can actually use the 1.6L 8v head on the 1.3L but not the other way around.
@grigorsch158 2 жыл бұрын
@@ELKMotorsports and i need to adjust the gas volume intake or the Air flow intake?
@arizonaadventures4183 4 жыл бұрын
Is this possible with a 1995 16v 1.6L sidekick?
@ELKMotorsports 4 жыл бұрын
Arizona Adventures , yes. But you'll need to get a intake manifold for a carburated model.
@ELKMotorsports 4 жыл бұрын
If your talking about a intake manifold, give Andrew Hall a call at Zuks of Hazard. (His info is in the description of the video and is on my channel summery tab). You can can find him on Facebook, Google, etc. Tell him I recommended you. He is a great guy that has a lot of parts for these amazing rigs.
@ltlewis15 3 жыл бұрын
Thanks for the video but the background music is annoying. Prefer to just have you talking.
@tomsullivan536 2 жыл бұрын
I contacted Gary Scantlin because I only want/need half of his kit. I have a small machine shop at home and I made the EGR block off 20 years ago. It turns out that Gary is an ass and wont sell me the parts that would save me time. Well I had to spend the weekend making the parts that I could have just opened a box to get. I saved some time in the shop by viewing your video, thanks.
@apicolatremoladalamercedch1039 2 жыл бұрын
Y porque no el 4k ?
@juliosarabia5541 Жыл бұрын
3k y 4k con iguales, sólo cambia que en el 4k hay una válvula que corta o permite el paso de la gasolina, en lo demás son prácticamente iguales.
@junybeltran4920 5 жыл бұрын
Who makes this kit??
@ELKMotorsports 5 жыл бұрын
Gary Scantlin www.certifiedmachine.com/
@junybeltran4920 5 жыл бұрын
Thank you have you done a video setting everything up??
@ELKMotorsports 5 жыл бұрын
Juny Beltran not yet
@sevensenseification 5 жыл бұрын
Hi whats up? I miss a new video. Whats going on?????
@ELKMotorsports 5 жыл бұрын
Off Driver, hey buddy!!! I'm still here, I've just been working out of town, and it's been hard to film and edit. I've got a video I'm working on now but I unfortunately don't have an ETA on it.
@sevensenseification 5 жыл бұрын
@@ELKMotorsports Oh. I am glad you go on with your videos
@EivinSukoi 5 жыл бұрын
Wtf is going on with all Johns today , they popped out like prairie dogs all over 😬.
@keyworksales6241 3 жыл бұрын
This video is literally just you pulling stuff out of the box. Its pretty useless.
@ELKMotorsports 3 жыл бұрын
But it's not useless, because it's samurai stuff!
Uncle Tony's Garage
Рет қаралды 199 М.
Fabbin Adventures
Рет қаралды 36 М.
Hwy83 SUZUKI
Рет қаралды 3,1 М.
Berkeley Suzuki Customs
Рет қаралды 741
Shiyin Li
Рет қаралды 22 МЛН
RusMovies
Рет қаралды 543 М.
20% nano ceramic tint installed on this brand new Audi S5! FACTORY finish on these frameless windows
Tint God
Рет қаралды 3,8 МЛН