Your video was a BIG HELP toward saving me money on getting repairs done to my 1994 toyota camry. THANKS SO MUCH. PLEASE KEEP TEACHING US about our cars. Your a very smart man. LOVE YOUR ACCIENT!!!

Awesome video. This guy makes it look so simple and easy. Thank you very much. The dealer wants 79.95 for this service and 199.99 for EFI service.

Followed your directions, changed the air filter also and gave the car a chance to recalibrate and is working fine afterwards. Thanks for the video on MAF!

My 2002's MAF has never been cleaned in 20 years. Like the video author said, it lasted this long because it was driven gently with good air quality conditions. So that might answer one of the viewer's questions. I had a vacuum leak right near this sensor too on the fat rubber boot, someone didn't tighten it up maybe when they changed the air filter. Now it has P0174 and P0171 codes. The car runs too rich and guzzles gas right now. I ordered the same cleaner. Thanks for the fantastic video. You are very helpful sir thank you.

Thanks so very much for that part where you said one shouldn't freak out when you start the car and it revs up way higher than it was. I cleaned mine last week just like you did in the video and boy, the rev shot up so dramatically which got me so scared that I thought I'd done more harm than good. I took the car on a very long drive for about 3 hours in some heavy traffic jam and when I returned home, it was back to normal. Thank God I didn't waste my money earlier going to a mechanic to tone down the revving.

Outstanding video. Well explained. Enormously helpful. Thanks!

Your videos are a great resource for us Toyota owners... thanks!

Truly appreciate the specific detail and patient explanations you give. Thank you.

Thank you so much for clearly and concisely explaining what needed to be done to clean my MAF!

This was the most detailed video on this topic. Thank you. 👌👌👌

You honestly save my life from taken it to my mechanic the part might be expensive but Easy fix thank you good job on the videos

Excellent Tech! Very thorough, informative and helpful. Adds tips along the way. Thanks for taking the time to do this! Bravo!

Thank you! Linking to this video from my own! Following your instructions helped reinforce that I used the correct cleaner and to not touch the sensor. Simple maintenance that made a difference in my car's performance!

I just cleaned MAF and TB on 2003 Camry. Yep, idle went up to 1100 rpm. Hopefully will drop to normal RPM after few drive cycles. Appreciate and enjoy this channel.

Nice 1 yr later we still use your video that is my problem thanks

Nicely done! 💡👍🏻🔑 Im going to do the same procedure on my 2015 Honda Fit Thank you Mr. T.M

You should change the MAF Sensor depending on your travel. Normal street use: inspect the sensor every 30,000 miles. If it's dirty then clean it. Thanks for that tip!

it’s good when people figure out their problems that their happiness lets them help others by sharing, wish the manufacturers and political systems would do the same

Thanks, well done and got me through the process perfectly.

Great channel, really appreciate you. Thanks!

Great video! Your accent is fantastic.

Nicely done. Can you state some symptoms of a dirty MAF sensor on particularly Camrys?

this is a big help thanks for showing us how 🙋‍♂️

Very thoroughly explained and demonstrated.

Wow, came across your channel I own a 2008 Camry LE same exact engine 2az-fe. Sitting at 118xxx miles just noticed at red lights it idles a little rough. Definitely going to give this a try, thank you so much for the post

Great video. Very helpful. Will try on my own.

Thank you for video. Very thorough.

Can I use the CRC MAF cleaner on the outside of the MAF sensor after cleaning the inside wires? Mines super dusty outside.

Very nice clear instructions.

Great info. Tks. My camry engine stalls when I slow to a stop. Is this the sensor problem?

Excellant vlog!

Thanks for sharing this information.

Thanks for the great video. Have a good weekend!❤

Very well explained man, thanks for making this video 🙏🙏🙏

Can I use window cleaner or WD-40 to clean the MAF sensor? Just kidding, thanks for the video, nicely done !

Muy buen video me gusta .gracias ..gud vídeo ..thenkyo

GREAT video. Thank you!

I always took the air duct apart with the sensor still attached. I'll start taking the sensor off from now on to clean like in the video.

Amazing explained thanks

Amazing channel 🎉 Keep up the good work

You did very good job.... I learn something from you...thank you

Thank u this was very helpful 😊much appreciated

Awesome video dear friend. I hope this video is helpful. Keep posting such helpful videos. Thank you.

Can you use this spay as a manifold cleaner as well as a starter Spray if you need too as well can it do that as well or do I need to buy a Spray starter for that.

What is the normal idle for 2004 Toyota sequoia sr5 8 cyl vvt?

VERY NICE VERY NICE VIDEO MY GOOD SIR

That engine bay is clean af

Aloha, I am going to try this on my 2001 Toyota Camry seeing to how spark plugs, wires and coil paks where done but I still have a odd boggling every now and then. I really hope that it isn't anything like piston ring problems. Ugh. It's just been a 4 month challenge since I bought this car. It's like a bad Toyota relationship for me and I know that these cars just the best running family car.

Thank you.

Thanks a big help 🙏

That you for making this video

great video. thankyou

Great video

Hello my friend where do u have ur shop???

Very clear thanks!

Thanks for the video..

Would this work on a 2010?

Well since you do not recommend cleaning both the maf and the throttle body at the same time I think I'll start with the maf one weekend and the throttle body the next..I got a hesitate at low speed maybe that would fix it..

What is the car symptoms if dirty will it run rough or idle die when come to stop of sensor dirty?

Is it okay to remove the sensor? Will it not reset the computer like removing the throttle body would?

Can you clean with rubbing alcohol?

Legend

Would you recommend cleaning both the MAF sensor and the throttle plate at the same time ?

I changed mine and the first drive it pulled back several times when I pressed the speed. Is this normal?

Does the check engine light automatically reset itself. Or do you still have to do it manually

Is it good for 99 Toyota solara

Hei, I know the best is Sensor Cleaner but its hard to find from Finland. Is it ok to use Contact Cleaner ? This is good for cleaning contacts but essencially sensor is also an contact.

can I use my brother's tooth brush

Hi. I have same Toyota camry xli 2.4 vvti 2005. Problem is starting in the morning. Not in the morning like if you not start the car 3 hours after not start. If some people is push is going to be start same time. Plz explain me what is the problem

I cant seem to find it for a 1994 toyota camry, anyone know where its at?

I usually turn key without starting 2 times then I start it up...so computer can recognize part

nise man

I would use a magnetic screwdriver to remove those screws if it was me, so as not to drop them. Otherwise, a good video on the MAF sensor cleaning.

Question my code is P0113 IAT sensor is it the same sensor? I have a 2011 4 cylinder Camry

When cleaning how long dose it last

The red straw they give you with the cleaner is meant to be used it produces more pressure when your hitting the wires.

What code is this?

Seriously asking, I am from a 3rd world country where these cleaners are not available. What other solutions are somewhat doable for me?

Like

I used a toothbrush like you said and it turned out 👍 great

And guys, listen to this guy, DO NOT USE BRAKE OR OTHER KIND OF CLEANER.

Can I use degreaser to clean my MAF sensor? J/K!😆😆 Great Video!

MAF Sensor Cleaner is simply methyl alcohol. Definitely SPRAY ONLY or soak/splash with alcohol in a glass/porcelain/stainless container.

Fuck… okay so after everything i turned the car on and it ran and idled well. It shook a little bit but seemed to just be calibrating. Turned it off let it rest. Now I’m trying to turn it on and it seems very week and shakes a bit and turns off. Don’t know what to do now and am a little frightened and concerned. Please help.

you VILL USE DA SPRAY ONLY! 🤣

After cleaning can i use hair dryer to dry the sensor

I sprayed it 6 times then dynoed it. I didn't get the 36 wheel horsepower, TRASH! J/K thanks for the video.

Don’t let your wife watch this ! She now follows me around with a can of air freshener! Says “my” m-ass air flow works to good 🤣💨

Hey, can I use "brake cleaner" ??? 😂🤣😂🤣😂🤣😂🤣😂🤣😂

I cleaned my throttle body and now the car runs worse than it did in the first place

Is it ok,if i use WD-40 instead?

Guys, I flossed and used my toothbrush. It was fine

Great video. Thank you.