Hey Ben, I’m sure I speak for most DIYers that this video and commentary is priceless to us. I’m replacing my CDF drum and installing new clutches and steels. Thank you so much for this information. It makes it a whole lot easier.
@BigBensCarsAndCycles4 ай бұрын
Awesome, I'm glad it helped!
@paullatham341111 ай бұрын
Nice work, I’ve got to do one of these next week. Thanks for the tips!
@BigBensCarsAndCycles11 ай бұрын
You're welcome! Thanks for watching
@raymiller90683 ай бұрын
Hey mate Ray here from Western Australia well done better than any manual Ben great video
@BigBensCarsAndCycles3 ай бұрын
Glad to help!
@monka13245 күн бұрын
I’m having mine replaced at the dealership as we speak. 2019 F150 only 39,000 miles on it. Still has a month and half left on the manufactures warranty. This seems to be a common problem.
@fernandogutierrez1133Ай бұрын
Como se afloja la tuerca convertidor
@pablosproduction938710 ай бұрын
You save my life lol I work at a Chevy dealership and they sold a Use car with a bad transmission Customer tried to Sue the Dealership So the owner Gave to me to doit Cause he’s transmission Guy it’s busy with Warranty work lol Soo I’m stuck with this truck so that been said Thank you for this Video it’s going to help me a lot and I Can keep my Job a little longer 😂
@BigBensCarsAndCycles10 ай бұрын
Oh wow! Glad to help. If you have more questions I've got a Facebook group, link is on my channel page
@pablosproduction938710 ай бұрын
@@BigBensCarsAndCycles Thank you i will I got it done it wasn’t that bad thank you again just one question when I get the new one this trans come pre-filled with fluid comes top off or I have to top it off
@BigBensCarsAndCycles10 ай бұрын
@pablosproduction9387 I would double check the fluid level to be sure
@pedellbills1306 ай бұрын
I’m having mine replaced a 2017 f150 10 speed. I wish you were doing it!!!!
@BigBensCarsAndCycles6 ай бұрын
Thanks for your confidence in me! Thanks for watching
@arielpintado12110 ай бұрын
What did you use to take out the bolts out of the torque converter? And did you go through the drivers or passenger side?
@BigBensCarsAndCycles10 ай бұрын
Shallow 15mm socket, 3/8 ratchet. There's a black sheild behind the starter on some models you have to remove. If you don't have that you may have an access plug on the opposite side of the Trans up front to access the nuts
@TheTechGuider2 ай бұрын
Jeeze what a chore. This may be the last ford I buy lol.
@BigBensCarsAndCycles2 ай бұрын
I don't blame you!
@williamgoodman69696 ай бұрын
Wow big job! My 18 F 150 4x4 is leaking from front 61, 500 kilometres, how long to remove?
@BigBensCarsAndCycles6 ай бұрын
Hi, they can be removed in a half a day
@williamgoodman69696 ай бұрын
Thank you for great video!
@bradleyhomer359010 ай бұрын
I stripped my o2 sensor, so I price checked it and just cut the wire
@Gtechvid2 ай бұрын
Question, there’s two short Bell housing bolts I didn’t see where they came from. Do you know where they go
@BigBensCarsAndCycles2 ай бұрын
On the front next to where the starter bolts in
@Gtechvid2 ай бұрын
@@BigBensCarsAndCycles got it thanks!
@patbonilla99604 ай бұрын
Awesome video. After it’s installed does it have to be programmed or anything? Can I drive it to the dealer to clear codes?
@BigBensCarsAndCycles4 ай бұрын
Hi, yeah you can drive it to the dealer. If its a new transmission, the solenoid strategy will need programmed to improve shift quality. And the adaptive strategy needs reset too
@patbonilla99604 ай бұрын
It’s a used transmission. I installed it in my driveway thanks to your video
@patbonilla99604 ай бұрын
So on a used transmission all they are doing is clearing codes?
@BigBensCarsAndCycles4 ай бұрын
@@patbonilla9960 On a used one, they still need to program the different solenoid strategy and reset adaptives
@patbonilla99604 ай бұрын
Can I do that myself with forscan?
@kendavis11989 ай бұрын
HEY BEN, I came back to watch this Video again, It appears as tho the Tech's can't Find / Hear the Rattle I have since they did the Tranny replacement on my 2022 F-150. I been Looking, and going back and forth with the service writer for what good that's doing, I have Video's of the Noise and it sounds like it's coming fro outside the truck at the Fire wall area and seeming right at the top at the Dash, that's where I hear it. And it wasn't there before they did the Tranny. 🥺. Would you have any Ideas maybe? If they can't figure it out today, they wan me to come by 2 morrow and ride with (the Tech I'am told)???
@BigBensCarsAndCycles9 ай бұрын
Can you send me the clip? I've got a Facebook group you can upload it to. Or can upload to KZfaq and send me the link
@kendavis11989 ай бұрын
I dont have any social media accounts except this youtube channel. i dont know how to upload something to youtube from my photos and stuff.
@jairosendsit86672 ай бұрын
Probably the more for the torque converter
@jairosendsit86672 ай бұрын
Nuts
@kendavis11989 ай бұрын
I came by here to see just what was happening to my 2022 F-150 4X4, mfg date of 03/22, That (4) Technician's have Determined (at one Dealership), that the NOISE I been hearing, (a knocking noise) altho very slight, is coming from the Transmission??? I'am Really bummed out that my New F-150 with 4600 Miles on the ODO has to be torn apart this far already due to a Manufacturing Defect inside of this 10R80 Tranny??? I been told that my Truck's Transmission should be an "updated" unit from the build date?? The dealer got the new transmission last Monday 09/25/23 and finished the Install Friday 09/29/23 and reported to me that the noise is gone? 🤞🏻. I just hope the Technician got all the Parts and hardware, nut's Bolt's, Washers, connectors ,covers and all put back correctly and Torqued properly, and the Transmission fluid level is correct. That is my biggest fear, that something wasn't finished properly and something happens down the road on my new F-150 4X4? Great Video here, and a TON of work to do this Job. Thanks.
@BigBensCarsAndCycles9 ай бұрын
Hey, not to worry.. it would be pretty difficult to mess this job up. It's all nuts and bolts, it should be obvious if something wasn't done right. Good luck to you with your new transmission!
@kendavis11989 ай бұрын
Thanks BigBen, I'am guessing with all the 10R80 Issues that these guy's have done a Number of these. I am just a Picky Customer that worries about everything 🤔. If I was closer to my Brother, I'd go up to his Joint and put it on his Rack when I get it back and he and I would go over the Job. But, that ain't gonna happen. I'll just have to trust these guy's know em like the back of there Hand's by now. Thanks again, It does help me have some kind of faith in these guy's down their knowing that the Job is pretty straight forward. 👍🏼👌...