TRE 760 cid Big Block Chevy Nitrous Engine
Рет қаралды 12,947
6 ай бұрынLast fall while we were in Houston, we made the drive out to Cleveland, TX to visit with Taylor Lastor, owner of TRE Racing Engines. His shop specializes in machine work and building big cubic inch drag race engines like this 760 cubic inch big block Chevy nitrous engine. Find out what goes inside it in this episode of Engine of the Week brought to you by @penngrade1motoroil830, @elringdasoriginaland NPW Companies.
#engines #enginebuild #enginebuilding #horsepower #performance #dragracing #nitrous #chevy #bigblock #engineoftheweek #houston #texas #enginebuildermag
www.enginebuildermag.com/
www,penngrade1shop.com/
www.elring.us/
www.npwcompanies.com/
treraceengines.com/
@lanegeisewite1436 5 ай бұрын
Beautiful badass Chevrolet!😍😍🇺🇲🇺🇲🇺🇲💪💪💪
@jerrybennett2404 5 ай бұрын
It's cold in there or either somebody is excited about talking engines. 😂
@brianholcomb6499 5 ай бұрын
Taylor is an excellent builder! The amount of parts he has is mind blowing! His stuff has always run hard 👍🏻👍🏻👍🏻👍🏻!
@n.b.p.davenport7066 5 ай бұрын
The bigger the engine gets the more weight is thrown around, I think there'll be a limit on the size of engines and RPMs just filled the Giants slingshot
@rayfoxworth2360 5 ай бұрын
He builds fast race engines
@travisvalcourt8774 5 ай бұрын
I wish the guy from engine builder would ask more intuitive questions so we can get more information from the builders
@Bossman816 5 ай бұрын
I dont think he cares anymore.
@EngineBuilder 5 ай бұрын
What would you like to know specifically? We are always aiming to do better.
@MarkSperlik 4 ай бұрын
Questions for example... At what RPM do these engines make their claimed Horsepower??? What is a good Durable, Livable, Long Lasting, Rod/Stroke/Deck Height/Bore Size/Rod Angle Ratio are the best for engines for 632+cid and up and such as some of these 700+CID engines so they will LAST verses beating themselves to death and having to do early teardowns/rebuilds, etc.??? What are some of the better Deck Height/Rod Length/Stroke/Rod Angle Ratio combinations, etc etc for LONGEVITY???
@andrewdemoss5770 5 ай бұрын
What rpm do these big nitrous motors turn?
@maldo72 5 ай бұрын
great content ..... but you did not show the inside of the motor ...
@EngineBuilder 5 ай бұрын
Unfortunately, when the engine is already mostly put together, we don't make the builders tear it back down. This one had a few spots still open.
@rapidride2 5 ай бұрын
Aren't these engines severely valve size limited at this cubic inch at a 4.840 bore space?
@lindsaymcpherson4744 5 ай бұрын
Can you get a water block ??
@n.b.p.davenport7066 5 ай бұрын
Steve Morris👍👍
@WilliamMeece-hc1rx 5 ай бұрын
Can he build a max effort procharged Big block Chevy deal
@mback12000 5 ай бұрын
Distracting music. Just don't get it. Would like to listen to the dude, not cheap guitar loop.
International Dyno Authority
Рет қаралды 28 М.
Gufee.medalin
Рет қаралды 9 МЛН
QAZSPORT TV / ҚАЗСПОРТ TV
Рет қаралды 4,5 МЛН
Jim's Automotive Machine Shop, Inc.
Рет қаралды 334 М.
Jay Leno's Garage
Рет қаралды 444 М.
POWERNATION
Рет қаралды 1,3 МЛН
The Horsepower Monster
Рет қаралды 81 М.
Fullboost
Рет қаралды 25 М.
# мотоТаня
Рет қаралды 6 МЛН
Bohouz
Рет қаралды 2,1 МЛН