Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com 1aau.to/ib/1ABFS00358
This video shows you how to install rear brake pads and rotors on your 2001-2007 Toyota Highlander. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes.
This process should be similar on the following vehicles:
2001 Toyota Highlander
2002 Toyota Highlander
2003 Toyota Highlander
2004 Toyota Highlander
2005 Toyota Highlander
2006 Toyota Highlander
2007 Toyota Highlander
Tools you will need:
• Pry Bar 1aau.to/oft/1AXAA00020
• 14mm Socket 1aau.to/otp/1AXAA00015
• 17mm Socket 1aau.to/otp/1AXAA00015
• 21mm Socket 1aau.to/oiE/1AXAA00043
• Brake Caliper Compressor Tool. Single Piston. Lever Style. 1aau.to/os/1AXAA00288
• 3/8 Inch Air Impact Gun
• Torque Wrench 1aau.to/omT/1AXAA00044
• Brake Grease
• Brake Parts Cleaner
• Copper Anti-Seize
• Wire Brush 1aau.to/obQ/1AXAA00079
Subscribe: / @trq
Check out our playlist:
2001-2007 Toyota Highlander 1st Generation: • 2001-2007 Toyota Highl...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.