How to Replace Harmonic Balancer 1997-2006 Jeep Wrangler

Рет қаралды 5,259

8 ай бұрын

Shop for New Auto Parts at 1AAuto.com 1aau.to/c/82/F/harmonic-balancer
This video shows you how to install a new harmonic balancer from TRQ on your 1997-2006 Jeep Wrangler. For many vehicles, the harmonic balancer not only helps balance the engine, but also drives the accessory belt. If your engine is vibrating, or belts are slipping, you might need a new harmonic balancer.
This process should be similar on the following vehicles:
1997 Jeep Wrangler
1998 Jeep Wrangler
1999 Jeep Wrangler
2000 Jeep Wrangler
2001 Jeep Wrangler
2002 Jeep Wrangler
2003 Jeep Wrangler
2004 Jeep Wrangler
2005 Jeep Wrangler
2006 Jeep Wrangler
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obsx/1AXAA00013
• Pry Bar 1aau.to/oYn/1AXAA00020
• 13mm Wrench 1aau.to/o2L/1AXAA00010
• 10mm Socket 1aau.to/obmr/1AXAA00017
• 17mm Socket 1aau.to/obGY/1AXAA00015
• 19mm Socket 1aau.to/oao3/1AXAA00043
• Harmonic Balancer Puller 1aau.to/o7/1AEHB00094
• Pliers
• Ratchet 1aau.to/obKf/1AXAA00016
• Socket Extensions 1aau.to/obGY/1AXAA00015
• Torque Wrench 1aau.to/oaPB/1AXAA00044
• Cloth Rags 1aau.to/oFD/1AXSS00035
• Gear Oil
• Gloves 1aau.to/oaq4/1AXSS00048
• Liquid Thread Locker
• Safety Glasses
• Drain Pan
• Floor Jack 1aau.to/oadJ/1AXAA00068
• Hammer
• Jack Stands 1aau.to/o2h/1AXAA00065
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 7

@TRQ 8 ай бұрын

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@josefranciscoesquertalaman3827 8 ай бұрын

Presente en las aventuras de mecánica automotriz de *TRQ* gracias por compartir información muy buen contenido, cordial saludo desde Navojoa Sonora México 🎉

@aquaticontent 6 ай бұрын

you shouldn't use the balancer nut to retighten the balancer on, it's only there to keep things in place once it's on. most puller kits will also come with a nut or tool to force the new balancer back on. tightening it with that nut can deform the washer or damage the threads inside the crankshaft, which would be a nightmare to fix properly.

@codyelo6936 8 ай бұрын

Found your channel nice content, very useful! I'm curious if youll be doing a gas tank, fuel sensor, fuel filter on the jeep wrangler?

@anticat900 4 ай бұрын

Hello, Could someone advise what is the exact spec of the main bolt, the diameter, length, thread and material type?

@cantfixstupid5503 7 ай бұрын

whyd you put an old a55 balancer on? that thing looks like its on its last leg, the other pulleys also on their way out. sheesh

@plsniper 7 ай бұрын

If the threaded shaft that goes in the center of the puller would be half the length, or maybe even shorter, the radiator would not have to be removed. That damn thing is way too long.