Buy Now!
New Tie Rod from 1AAuto.com 1aau.to/ia/1ASTE00481
This video shows you how to install new TRQ outer tie rods on your 1997-2006 Jeep Wrangler. Outer tie rods, sometimes referred to as “tie rod ends,” connect the steering rack to the steering knuckle. Their joints can wear out over time, causing loose steering, vibrations, and uneven tire wear. They are also a common failure point in localities with safety inspections.
This process should be similar on the following vehicles:
1997 Jeep Wrangler
1998 Jeep Wrangler
1999 Jeep Wrangler
2000 Jeep Wrangler
2001 Jeep Wrangler
2002 Jeep Wrangler
2003 Jeep Wrangler
2004 Jeep Wrangler
2005 Jeep Wrangler
2006 Jeep Wrangler
Tools you will need:
• Pry Bar 1aau.to/oYx/1AXAA00020
• 15mm Wrench 1aau.to/o2T/1AXAA00010
• 14mm Socket 1aau.to/obHi/1AXAA00015
• 18mm Socket 1aau.to/oapm/1AXAA00043
• 19mm Socket 1aau.to/oapm/1AXAA00043
• Pliers
• Wire Cutters
• 1/2 Inch Impact Gun 1aau.to/ovx/1AXAA00252
• 3/8 Inch Drive Ratchet 1aau.to/obHi/1AXAA00015
• Torque Wrench 1aau.to/oaP2/1AXAA00044
• Copper Anti-Seize
• Gloves 1aau.to/oart/1AXSS00048
• Safety Glasses
• Floor Jack 1aau.to/oad6/1AXAA00068
• Hammer
• Jack Stands 1aau.to/o2B/1AXAA00065
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.