How to Replace Rear Brakes 10-17 Chevy Equinox

Рет қаралды 33,067

5 жыл бұрын

Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com 1aau.to/ib/1ABFS02601
This video shows you how to remove old, rusty, seized, or grinding rear brake pads and rotors from your 10-17 Chevy Equinox, and replace them with new, quality, engineered to fit parts from TRQ.
• Check here for more videos on the 2010-17 Chevy Equinox: • Chevy Equinox 2010-201...
This process should be similar on the following vehicles:
2010 Chevrolet Equinox
2011 Chevrolet Equinox
2012 Chevrolet Equinox
2013 Chevrolet Equinox
2014 Chevrolet Equinox
2015 Chevrolet Equinox
2016 Chevrolet Equinox
2017 Chevrolet Equinox
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oCz/1AXAA00013
• Pry Bar 1aau.to/ohX/1AXAA00020
• 10mm Wrench 1aau.to/oiu/1AXAA00010
• 15mm Wrench 1aau.to/oiu/1AXAA00010
• 14mm Socket 1aau.to/oCA/1AXAA00015
• 15mm Socket 1aau.to/oCA/1AXAA00015
• 19mm Socket 1aau.to/onI/1AXAA00043
• Complete Torx Bit Set 1aau.to/of6/1AXAA00008
• 3/8 Inch Breaker Bar
• A Piece of Pipe (for leverage)
• Ratchet 1aau.to/oFa/1AXAA00016
• Torque Wrench 1aau.to/oss/1AXAA00044
• Brake Grease
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oeF/1AXSS00035
• Safety Glasses 1aau.to/ocT/1AXAA00343
• Hammer 1aau.to/oih/1AXAA00091
• Large C-Clamp
• Wire Brush 1aau.to/oc3/1AXAA00079
Subscribe: / @trq
Check out our playlist:
Chevy Equinox 2010-2017 2nd Gen: • Chevy Equinox 2010-201...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 17

@TRQ 3 жыл бұрын

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

@jeffswanson4563 3 жыл бұрын

Just competed installation of rear brakes on my 2011 chevy equinox. Watching this video prior to doing the job, it has by far the easiest rear brake job ever. Great video with explanations. Thank yoh!

@billro6665 4 жыл бұрын

Very good video you took your time and explained process very well. Thank you.

@ldamagez Жыл бұрын

Hello, changing rear brakes myself for the first time tomorrow. Just curious if there is much difference in changing rear and front brakes and rotors

@HagersvilleHunk 2 жыл бұрын

wait a minute....something not right. HOW did you get the rotor to slide over the parking brake shoes? My rotors are hung up on the shoes and dont want to budge at all!

@keith.keepness3106 3 жыл бұрын

Really good, now I'm gonna do my brakes!!

@SpecterTM3 5 ай бұрын

I wish I didn’t have rust everywhere while doing this lol

@a4shaun169 3 жыл бұрын

What’s the best thing for tightening the sliders to 20lbft, my torque wrench starts at 25 so what should I do?

@julianperez1270 Жыл бұрын

TQR guys sells good stuff but the Axles for Honda civic from 02 to 2012 doesn't hold more than 350hp.i already went through 2 sets had to upgrade for 500hp insane shaft