Buy Now!
New Catalytic Converter from 1AAuto.com 1aau.to/ib/1AEEM00725
This video shows you how to install a new TRQ direct-fit bolt up catalytic converter assembly on your 2003-2008 Subaru Forester. This vehicle uses an integrated exhaust manifold and catalytic converter assembly. That means you can replace the manifold, or the catalyst, without needing any cutting or welding.
This process should be similar on the following vehicles:
2003 Subaru Forester
2004 Subaru Forester
2005 Subaru Forester
2006 Subaru Forester
2007 Subaru Forester
2008 Subaru Forester
Tools you will need:
• 14mm Wrench 1aau.to/o2J/1AXAA00010
• 14mm Socket 1aau.to/obGR/1AXAA00015
• Exhaust / Muffler Hanger Removal Pliers 1aau.to/oh/1AXAA00151
• O2 Sensor Socket
• Ramps
• 3/8 Inch Drive Ratchet 1aau.to/obGR/1AXAA00015
• Swivel
• Exhaust Sealant
• Gloves 1aau.to/oaqV/1AXSS00048
• Safety Glasses
• 8mm Allen Wrench
• Floor Jack 1aau.to/oadC/1AXAA00068
• Jack Stands 1aau.to/o2b/1AXAA00065
• Wheel Chocks
• Wire Brush 1aau.to/oux/1AXAA00079
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.