Рет қаралды 35,971
Buy Now!
New Accessory Drive Belt Tensioner from 1AAuto.com 1aau.to/ib/1AEB...
This video shows you how to install a new belt tensioner in your 2008-2013 Nissan Rogue. A weakened or seized belt tensioner can lead to worn, damaged, or even broken belts. It is important to replace the tensioner as part of a semi-annual service to avoid problems and damage.
This process should be similar on the following vehicles:
2008 Nissan Rogue
2009 Nissan Rogue
2010 Nissan Rogue
2011 Nissan Rogue
2012 Nissan Rogue
2013 Nissan Rogue
Tools you will need:
• Phillips Head Screwdriver 1aau.to/obge/1A...
• 14mm Wrench 1aau.to/oTB/1AX...
• 13mm Socket 1aau.to/obnG/1A...
• 14mm Socket 1aau.to/obnG/1A...
• 16mm Socket 1aau.to/obnG/1A...
• 21mm Socket 1aau.to/oadb/1A...
• Trim Tool Set 1aau.to/o7K/1AX...
• 1/2 Inch Impact Gun 1aau.to/ory/1AX...
• T20 Socket
• Ratchet 1aau.to/obvR/1A...
• Socket Driver
• Socket Extensions 1aau.to/obnG/1A...
• Swivel
• Torque Wrench 1aau.to/oazG/1A...
• Block of Wood
• Gloves 1aau.to/oV4/1AX...
• Safety Glasses 1aau.to/oPe/1AX...
• Floor Jack 1aau.to/oZj/1AX...
• Hammer 1aau.to/oRZ/1AX...
• Jack Stands 1aau.to/oQQ/1AX...
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.