WATCH IN 4K HD Trucker Ray - How to Drive 13 Speed Transmission - Shifting NO CLUTCH plus JAKE BRAKE ON Follow me Below Guys / raysvlog www.instagram.... Google my name: Raymond Harlall www.google.ca/...
Пікірлер: 89
@ericm14304 жыл бұрын
no matter how good you are. do not switch gears in a turn, especially in the snow. You have 40,000lbs that wants to go straight, you need power to pull it through the turn. I pull 5 axle trailers like 90,000lbs and it will push you and put you into a jackknife if you roll/coast through a turn. Bad habit to get in switching gears in a turn
@b.atwater39045 жыл бұрын
I could float gears fairly well and one day on a trip from Maine to Alabama, the clutch went out on the FL Classic I was driving just before the border of Maine and I had to get the truck and 53 reefer back to the shop... All the way, No Clutch at all, shut down at every full stop, start in gear and float every one, up and down, in traffic and pulling hills too. 10 days experience in a 13 speed. Previous truck was a 10. No problem.
@sarfarazpatel96066 жыл бұрын
Very few canadians have there driving videos mostly all you tube videos are USA drivers. Good to see Canadian showing thing or two to all new drivers like myself.
@raymondharlall6 жыл бұрын
sarfaraz patel that’s is very true... most of my viewers r from the us too
@magundasempala35332 жыл бұрын
good morning ray am moses watching from africa uganda 🇺🇬
@trevinocorina26233 жыл бұрын
Idk but he is fun too look at an explain this trucking gear stuff
@SternDrive Жыл бұрын
Excellent driving, but I have a question. In my 48 years of driving I have never shifted with the Jakes on. It can mess up your shifts and wreck stuff real quick. In my recent job I was given a Peterbilt 379 with a Cummings engine, and too my complete surprise I could shift with the Jakes on. They have a small delay in the Jakes that allows this, but in most engines, I don't think it is a good idea. Shut the Jakes off. I do downshifts with the Jakes on. BTW, I pull Super B flat decks with heavy steel loads and I often start off in low gear, and I sometimes split some of the low range gears. It's easier on the engine and saves fuel.
@truckingwithfauz7089 Жыл бұрын
True...I have been driving 13spd for a month and its hard with jakes
@raynay512911 ай бұрын
You got about 12 years on me, but YE! I'm the very same way. I tend to throttle back too much and the Jake kicks in LOL
@marcuswrayboi5 жыл бұрын
Does anyone else think he looks like Carlton from fresh prince of bel air? 😂🤷🏽♂️Seriously tho.
@graymikep645 жыл бұрын
He looks like Aknad from Ahmed goes to turkey
@jeantyhiguaine46744 жыл бұрын
Yes good
@novjet75094 жыл бұрын
Yes, he does look like Carlton
@wilsonrosa69344 жыл бұрын
Factssss
@xangvongsamphanh80454 жыл бұрын
thanks for the video, I m a student in bc. your show might help me shift drive better. and thanks for your tips on how to pass driving test.
@raymondharlall4 жыл бұрын
Happy to help! be sure to Subscribe
@divyasieudarsan9896 жыл бұрын
Good job👏🏽 be careful in the snow and stay safe 😎
@raymondharlall6 жыл бұрын
thanks to watching @divya
@sarfarazpatel96066 жыл бұрын
I watched few of your videos you are good bro
@raymondharlall6 жыл бұрын
appreciated you taking the time to leave a comment for me! thank you Very much! !!
@kangeabubakar58796 жыл бұрын
This is redicurous amazing thanks men...Am in love with heights master of the road.😘😘😘
@graymikep645 жыл бұрын
Woww sounds gay
@rossawood5075 Жыл бұрын
Don"t let the manufacturer know you"re floating an R/ Ranger, warranty will be dishonoured, generally floating any Eaton or similar box does cause extra wear on shafts , gears and synchronisation normally having friction stress removed by half depress of clutch. Eaton specifically state in manual, do not do clutchless gear shifts! There is a good reason for this, life of transmission and damage albeit inadvertent when a shift goes wrong! Having said that i I have been known to clutchless shift! But with three and four trailer roadtrains (140 ton plus) we run here in Australia I would be ultra carefull with any RR under the high torque and weight loads imposed on a drive train under these conditions. The gearbox was designed for the use of a clutch, otherwise buy an auto. Jus sayin'
@ExtremeRecluse6 жыл бұрын
I do floating all the time. Much eaier. Use the clutch during first acceleration.
@raymondharlall5 жыл бұрын
100%
@martinharris51076 жыл бұрын
Good driveing bro be safe
@raymondharlall6 жыл бұрын
Martin Harris thank you
@aahmad3414 жыл бұрын
Now that's some trucking
@albertoturrado18636 жыл бұрын
Thanks for your video's good help.gracias por tus videos son de mucha ayuda para mi.👍
@charlesalves53676 жыл бұрын
Good for me to learn from the video clip. Thanks.
@raymondharlall6 жыл бұрын
Charles Alves awesome
@PDMcG10915 жыл бұрын
CAS-CADE-EY-YA not cascada. It’s also “Freightliner”
@waltercontreras26085 жыл бұрын
thanks for the video and input from las vegas nv
@raymondharlall5 жыл бұрын
Walter Contreras awesome my friend
@rhajeedsharpe44413 жыл бұрын
At the starting of the video it said drivers wanted.. I know its a long time but any vacancy available??
@raymondharlall2 жыл бұрын
yes. where you located. thank you for you comment. I really appreciate you. Be sure to support my channel by Subscribing :) Raymond
@rhajeedsharpe44412 жыл бұрын
@@raymondharlall I'm from Jamaica
@sarfarazpatel96066 жыл бұрын
Thank you bro.
@mage53712 жыл бұрын
You should be a pirate
@raymondharlall2 жыл бұрын
y you say that?
@onelifenoregrets2913Ай бұрын
Your jakebreak on and you said it snowing? 😂 ok boss
@fjcarmo03695 жыл бұрын
Sounds like Star Fox 64 music.
@sarfarazpatel96066 жыл бұрын
Thank you brother
@nelsondeleonf75496 жыл бұрын
Quien me dice el rpm correcto para cambiar una transmisión de 13 velocidad
@donovanevans30193 жыл бұрын
clutch is only for stopping and starting tbh
@raymondharlall3 жыл бұрын
Thank you for your feedback and be sure to Subscribe 👍
@dollypooran42676 жыл бұрын
nice
@geneimperialvlog50524 жыл бұрын
i watching from Philippines i Want to apply as a Trailer Truck Driver...your Company..
@raymondharlall4 жыл бұрын
THank you for Subscribing!!!
@raymondharlall4 жыл бұрын
You got it my friend. Glad it was helpful! Watch my other videos too. I have over 100 videos. Please support my channel by Subscribing to my channel. Thank Ray.
@mikecioka11804 жыл бұрын
Man I when to try my first time and shifting was not easy, specially trying to get the sweet spot:( i hope today go better
@raymondharlall4 жыл бұрын
You got this! up shifting is much easier than down. try to change between 13-1400 rpm
@HPX5843 жыл бұрын
did you get better now??
@sarfarazpatel96066 жыл бұрын
I dont have truck gps, is there any other way i can find my way around my route while i am driving?
@raymondharlall6 жыл бұрын
sarfaraz patel well if I drive tractor trailer u will need one for long distance and in cities as there are routes u r not allowed to drive on or a bridge might be too low n u hit ur roof off!! But a good one is over $500. A general rule is to drive on roads that have a #. Meaning it’s a major road.
@larrycobb31025 жыл бұрын
Invest in a truckers Atlas. It doesn't break down. Lol.
@BibleLovingLutheran Жыл бұрын
You spelled Freightliner wrong
@sleepdivision3882 жыл бұрын
Of course now he can afford marriage and 25 kids
@miguelnunez51356 жыл бұрын
hi Trucker Ray, do you have any information how can I go to canada as a semi driver or know of any companies who would sponsor me to go there.
@QCorleoneTopic6 жыл бұрын
I’m in Detroit and I’m a cdl a driver
@robie77896 жыл бұрын
Do you have any tips on how a Jamaican trailer driver can get employment in Canada.
@seantowingandrecoverytowin25043 жыл бұрын
Yes go to Jamaica 😂
@realastalamuerte97806 жыл бұрын
👍👍👍
@lrodriguez93155 жыл бұрын
homeboy says its snowing using jakebreak? rookie
@02thetracker275 жыл бұрын
Cascada 😂😂😂😂😂
@gillsaab1594 жыл бұрын
why my driving school instructor told me use double time clutch to shift gears
@raymondharlall4 жыл бұрын
becuase this is what the examiner wants to see. you cant keeping doing that. then you will have now knees left
@alexb-os3qz6 жыл бұрын
so you only use splitter down when you down shift but not when going 4 th to 5 low and then 5 high?
@raymondharlall6 жыл бұрын
alex montalvo. A splitter only splits 1 solid gear. 4 high to 4 low. To 3 high to 3 low. To 2 high to 2 low. To 1 high to 1 low.
@by_gravityz20633 жыл бұрын
At wat rpm do you shift
@raymondharlall2 жыл бұрын
depends if you are going up or down hill. and if loaded or empty, generally between 12-1500 to upshifting and 1000-1200 for downsfiting. thank you for a great question Be sure to hit SUBSCRIBE :) -- Raymond Harlall
@sarfarazpatel96066 жыл бұрын
Which RPM is good for floating gears
@raymondharlall6 жыл бұрын
sarfaraz patel that’s for that question! Will make a video for u soon ...🎥
@adamthayer99955 жыл бұрын
1500 RPM is the safest way float gears in a big rig then to downshift wen its at 1300 rpm then take it out of gear and rev it up to 1500 rpm to downshift
@SternDrive Жыл бұрын
In low range you can shift at 12 or 1,300 RPM. When you get into the higher gears you can run it up to 1,500 RPM. There is no need to run a modern truck any higher unless you are climbing a hill. In that case I might run it up to 1,700 RPM. This is called progressive shifting.
@graymikep645 жыл бұрын
Akmed! Your not talking aboutb13 speeds! Your doing other shit... I figured mine out the 1st day no help.
@slimthoed5 жыл бұрын
Michael Trucking Gray lmao really tho 😂
@jonnatanavelino44944 жыл бұрын
Do you always have to use the glutch when ur higher then 3rd?
@raymondharlall4 жыл бұрын
not quite. for first and revers mainly
@yousifyoukhana99475 жыл бұрын
Hi brother how you 🌟🌟🌟👍🇨🇦🌟🌟🇨🇦🇨🇦
@Loud_Thinker3 жыл бұрын
Those who drove a semi truck and make videos for you tube at the same time should be prosecuted and your license should be revoked! You're a danger for the public! Your attempt to gain KZfaq followers and fame isn't more important than safety of others driving around you!
@MrOrientalism3 жыл бұрын
You have no idea what you talking about
@raymondharlall2 жыл бұрын
lol. its legal my friend. im not holding it in my hand. its hands free. but i do value your safety concern and appreciate you taking the time to leave a comment. thanks Ray.
@jonathancubano5752 жыл бұрын
If you guys wants to float, just drive an automatic truck instead of damaging gears. You guys are a liability to the company.