Sausan Academy of Egyptian Dance Hi. Sorry, i haven't sold things. Just making these sometimes, just for fun. I have an Fb page if you want to check it out: facebook.com/kadanjalkia/ And, thank you!

Thank you very much!

Thanks. After little practising you'll notice that it is easy. After couple hours handling the tool comes easier and easier.

Sleepydog Thanks for watching it. 😊

One Nana Three Kids Thank you!

Wendi Decker Miller Thank you!

John Simonetti Thank you!

({:

Glen mckelvey Thanks. I have used handles for making lures for ice fishing. 😊

Tuomas Soikkeli I just home from ice fishing .

Donna Redman Thank you!

Thank you very much. I kind of forget the time when im making something small. Its very relaxing.

Thank you my friend!

Jérome C Thanks!

angelicinspirations Thanks. Cut off wheels works like grinding stones, those remove material with friction. So, those ain't so dangerous than saw blade's are. I also use slow rpm ( if you look the video, there's no sparks), so if the wheel slips it hardly makes a mark to my trousers. Of course its good to be carefull, but its not so dangerous as it looks. Those wheels usually break if hit something.

That's useful to know. Thanks :-)

angelicinspirations You're welcome. But, also know that with full speed situtation is whole different. 😊 So, its good to be carefull, even there's no need to be afraid.

Tungsten carbide cutters or diamond wheel points. Tungsten carbide cutters are better if you want to make deeper engraving. Diamonds for "etching" the surface, or finishing / fixing engravings made with tungsten carbide cutters. Materials hardens from friction, alumine, brass, copper and stainless steel, hardens easier than mild steel. Using wax ( that dremels red polishing wax works too) to cool the bit helps. Dip spinning bit to the wax after couple minutes of engraving, that avoinds bit to get stucked. Specially alumine can easily fill teehts on tungsten carbide cutters. I use 10-15k rpm with soft materials, 15-20k rpm with mild steel.

Carmen Alicia Torres Londoño Thank you. Used tungsten carbide cutters 9910 and 9903 shop.dremeleurope.com/gb/en/products/accessories?price=2,75&APPLICATION=engrave&MATERIAL=metal&SYSTEM=multi-tool-system Cut of wheels shop.dremeleurope.com/gb/en/productdetails/heavy-duty-cut-off-wheel-24-mm--185

Nikos Karavas Thanks mate!

Lazy watchsmith Kiitos!

Moro. Jos jossain vaiheessa kerkeet, niin käyppä testaamassa se meikäläisen uusin video suomalaisella tekstityksellä. ;)

Lazy watchsmith Toki.

Lazy watchsmith Toimivat hyvin. Hyvä idea. En edes tiennyt että toimivat puhelimessa. Pitääpä perehtyä aiheeseen itsekin.

Tuomas Soikkeli oli ihan hauskaa niitä tehdessä

Peter Compton Thanks Peter. No worries mate! Actually i don't use pliers because then i feel when spoon starts to get too hot. Also those type of cut off wheels usually broke if slipped and hit somerhing, and those doesn't cut skin very well. So, it makes just a little scratc if something. I work everyday with hot / melt steel at work, heavy materials.. I allready have some nice "marks" to my shoulders and arms from splashed hot steel... After twenty years im used to thoses little scratches. Of course im carefull, but i know what i need to afraid. 😁 ( circular saw's are scary)