Twin-engine LADA: 2.7 liters, 8 cylinders in a row

Рет қаралды 214,746

Garage 54

Күн бұрын

Twin-engine: 2.7 liters, 8 cylinders in a row

Пікірлер: 803

@brokeboymotorsports5674 5 жыл бұрын

Garage 54 never disappoints,I love this channel and how they do the things that no one thinks of ,and if it’s challenging they don’t give up ,props to the Russians

@mvp42688 5 жыл бұрын

my dad yeah same I agree! expect the English channel doest always post all his videos 😢😢

@joemammy4309 5 жыл бұрын

Dad!?

@brokeboymotorsports5674 5 жыл бұрын

joe mammy yup

@brokeboymotorsports5674 5 жыл бұрын

mvp 42699 Ik I looked on the regular one and it has some cooler creations

@joemammy4309 5 жыл бұрын

my dad well if your my dad im joe mammy

@diegosilang4823 5 жыл бұрын

BMW - Blyat Motor Works.

@gabrielvieira6529 5 жыл бұрын

LMAOO

@slipsby2704 5 жыл бұрын

CYKA BLYAT

@aliabdallah102 5 жыл бұрын

*Blyat! Motor works?

@evolistic314 5 жыл бұрын

@@aliabdallah102 yeah

@speedyblacksheriff 5 жыл бұрын

I love you

@allothernamesbutthis 5 жыл бұрын

LS 8 ( Lada Straight 8 ) engine :)

@ruikazane5123 5 жыл бұрын

LS? Shit!

@NathanKirby2001 5 жыл бұрын

Gonna have to swap that into a corvette :D

@Lee01Mr 5 жыл бұрын

Now make a inline 12 cylinder

@ak14619 5 жыл бұрын

Inline 69 cylinders

@televisionandcheese 5 жыл бұрын

Ohho , just you wait !

@RedHeadForester 5 жыл бұрын

kzfaq.info/get/bejne/fMqUd7t3087NcoE.html

@MrLobsterity 5 жыл бұрын

He has even made an inline 16 cylinder kzfaq.info/get/bejne/bseDgLOYtbnWc6M.html

@screener545 5 жыл бұрын

16 cylinder

@vibeandride2984 5 жыл бұрын

When will he run out of ladas

@GeorgiGeorgiev-ne9ps 5 жыл бұрын

@GM Kof hard there are plenty of ladas in US. Seen few in prestine restored condition for 10k. For 5 you could get one regular in NY or anywhere craigslist have 1

@GeorgiGeorgiev-ne9ps 5 жыл бұрын

@GM Kof hard check NY craigslist. 25 year old restriction is long gone on these

@mikecorleone6797 5 жыл бұрын

We have sanctions against russia right now... no russian imports till that’s cleared up.. literally, not even mail can be delivered lol

@poptartmcjelly7054 5 жыл бұрын

@GM Kof hard then just ship the engine in from europe, but they're not as amazing as you might think. Mostly 1.5 or 1.3l, so not much power but they are pretty reliable, courtesy of their simplicity. Around where i live a good condition 1.3l lada engine goes for as low as 30€, or you can buy the whole car for 150€.

@GlamStacheessnostalgialounge 5 жыл бұрын

+GM Kof hard Trust me dude you're better off just getting a complete car. The engines are pretty small, are are adequate to pulling along the really light Lada bodies, but on a (I presume) modern pick-up? You won't be able to get the thing rolling with the larger "special variant" 1.6 engine, let alone the cheapest 1.3.

@rjs198585 5 жыл бұрын

Now I understand how the Russian car crash videos come about

@quevicular 5 жыл бұрын

AHAHAHAHAHAHAHAHA!!! GOOD ONE

@gassern121 5 жыл бұрын

BMW 0-100=5.6 sec. Lada 0-100=Yes

@romanbukins6527 5 жыл бұрын

Pfft, a good well maintained Lada (but preferably a 2105 or a 2107) can do 160 km/h my dad did 100 in a ZAPAROZEC XD he said the front wheels would no longer make contact with the ground at that speed XD

@nicovanduin1553 5 жыл бұрын

@@romanbukins6527 ok cool

@HIDHIFDB 2 жыл бұрын

@@romanbukins6527 last gen Ladas were good.

@nickkraitor6560 5 жыл бұрын

I love it, great idea. Cant wait to see how this project goes. Maybe after this is finished you guys could stick another two engines in the back so the car becomes a 4 wheel drive 16 cylinder, it would be interesting to see what kind of acceleration it could achieve, it would have to be the worlds fastest Lada then. Good luck with this project.

@ak14619 5 жыл бұрын

A lada veyron

@nickkraitor6560 5 жыл бұрын

Yes, I think it would be amazing to see

@ak14619 5 жыл бұрын

Samsung Galaxy S7 Chiron has a W16

@micowikstrom7182 5 жыл бұрын

kzfaq.info/get/bejne/oqiAhaWL2qnddGg.html

@jamestepesh355 5 жыл бұрын

Sounds a realy great idea :)

@darthbolloful 5 жыл бұрын

I think we should take a moment to appreciate the engineering that goes into some of their projects

@TheSocialGamer 5 жыл бұрын

Even the next generation of car enthusiasts are Gods in fabrication and inventiveness..! Cheers to the young builders!

@_i-kr6eg 5 жыл бұрын

R.I.P transmission, R.I.P differential 😂😂👍👍

@TheGeezzer 5 жыл бұрын

They'll run...and work...but not for too long! 😆

@arba71 5 жыл бұрын

I bet the thing that connect the 2 engines will be broken before the drivetrain.

@HGSolberg 5 жыл бұрын

Nah. It will only be like 120 hp anyway at best, and the drivetrain on old Ladas are pretty solid. It won't be a problem.

@Digidi4 5 жыл бұрын

@@HGSolberg no way it's ever gonna have 120 hp maybe 90 at max

@paulwoodman5131 5 жыл бұрын

The clutch is not long for this world. And two radiators would be better for long term "reliability" . There will be vibration, and it might be violent, can't wait.

@MixMastoras 5 жыл бұрын

A guy in my neighborhood had 2-3 of this Lada model and he somehow managed to fit a second engine in the trunk of one of his. I don't know how was that even possible but I remember him working everyday on it while I was returning from school. I can assure you the sound of it was something angrier than a stock Lada engine!

@grrr3070 5 жыл бұрын

Next Turbo lada?

@gerrymcs5195 5 жыл бұрын

Next turbo lada v 12 lol

@Kristo99 5 жыл бұрын

plenty of turboed ladas out there, the engines can take the boost

@boostedlawnmower9955 5 жыл бұрын

@@gerrymcs5195 v16*

@gerrymcs5195 5 жыл бұрын

Lol

@drfrenchfrythe3rd 5 жыл бұрын

No. 6 turbo lada

@teardowndan5364 5 жыл бұрын

An actual I8 engine would fire a cylinder every 90 degrees of crank rotation for smoother power delivery, not a pair of cylinders every 180 degrees. Should have offset the two engines by 90 degrees instead of aligning them on TDC. Though it probably won't matter much due to how roughly everything is put together.

@SpaceShipDeathstar 5 жыл бұрын

Best comment here

@jonasthemovie 5 жыл бұрын

I think that how roughly they were put together is an argument for firing in pairs

@philtripe 5 жыл бұрын

its not really a straight 8 so it really doesnt matter at all

@TheMechanicalKoopa 5 жыл бұрын

I agree with this idea as well.

@robertr7923 5 жыл бұрын

You can't offset the engines with 90 degrees. They vibrating pattern is periodic with 180 degrees so the vibrations would destroy the crankshaft or the whole engine

@michael_the_chef 5 жыл бұрын

the best car-related youtube channel, i like that :)

@davidotto3242 2 жыл бұрын

Hey I just want to say I can't express how much joy you bring to everybody when you showed these videos you're really warm everybody's hardsub you're an awesome guy keep it up you and your Young Buck mechanic there you guys are awesome keep up the good videos we love you

@tdgreenbay 5 жыл бұрын

Makes me wanna import a couple ladas

@damienblackmore5318 5 жыл бұрын

Hey gentlemen! G'day from Australia! Love the channels progress so far, lots of laughs and needed information when you read between the lines. (: Thank you for your uploads and continued dedication to providing entertaining material and using your talents to do crazy things! :D

@DetroitMuscle440 5 жыл бұрын

You guys are nuts, I love it. Thanks for the videos!

@cky2k244 5 жыл бұрын

This guy makes me smile with every video. His humour and content is awesome. I really need to binge watch his channel.

@oddballdynamics.9658 5 жыл бұрын

You guys are amazing mechanics. Thanks for the vids.

@mb8804 5 жыл бұрын

I love this channel, provided it hangs together and the timeing is right, it's got to go faster, either way I can't wait for the next episode.

@Gonzo.S.Thompson 5 жыл бұрын

As long as you guys connect everything properly and time them together, it really should work. Here in America I've seen a guy connect two V8 engines and then he did it with four V8 engines on one vehicle.

@noraque1336 5 жыл бұрын

I love these guys. Doing crazy stuff and having fun.

@elainetreadwell5576 5 жыл бұрын

I love you guys, you’re the best. Keep the videos coming. They are so enjoyable.

@Nabojim 5 жыл бұрын

Love the video. I applaud your ingenuity and creativity.

@Kladden67 5 жыл бұрын

Вы, русские, сумасшедшие, но все, что вы делаете, это просто развлекаетесь, а я смотрю и наслаждаюсь всеми их видео. Спасибо, Влад, за все, что вы загружаете на KZfaq. Привет из Норвегии.

@jonnyrocket 5 жыл бұрын

That's crazy. .😂😂😂...and I love it. ..the vibrations in the car will be outstanding. ..

@tank4969able 5 жыл бұрын

Awesome, fun video and idea!! Can't wait to see the end of this project and future projects!!

@magicstunts4498 5 жыл бұрын

This is what the top gear challenges would look like in Russia! You guys are amazing. And a huge thanks to the translator!

@grandmaster1004 5 жыл бұрын

I'm so happy these videos are being translated, I kept seeing this car on their IG and wanted to understand what was going on!

@Reaper4367 5 жыл бұрын

It will be awesome to witness the speed trials of this beast! I dunno, but the torque this will now produce will be through the roof of the ol Lada. Wish my old Niva had this ;) . Great video, cheers for sharing.

@stewmiller778 5 жыл бұрын

Your video production has gone up a notch. Good work

@TheDobbins39 5 жыл бұрын

Just subscribed to your channel after watching a few of your videos. Can't wait to see the next instalment of the Lada 8.

@marygott66 5 жыл бұрын

I love you guys you guys are something else man all the crazy stuff and you keep doing it keep doing it fellas keep doing it.

@joshuacerini7631 5 жыл бұрын

You guys are awesome, you do so much fun stuff

@Gabja 5 жыл бұрын

What a great channel. Another fantastic and well put together video.

@anthonyjcarolan3161 5 жыл бұрын

That is the cool 😎 car with 2 engine I love ❤️ your video 📷 I can't wait for the video 📷 you have done a good job on that project

@alexsemenovsky1430 5 жыл бұрын

This is the best KZfaq channel , never disappoints.

@dohc1974 5 жыл бұрын

Lol this is crazy. I hope the welds on the flywheel are strong enough. Can’t wait to see the updates 👍

@BoostWorx 5 жыл бұрын

Love this project guys really excited to see the results, keep up the good work garage 54

@robburdack4361 5 жыл бұрын

This will tare its self apart....... No way everything was centered

@Brock_Landers 5 жыл бұрын

I am trying to be positive about this, but something tells me that you've got a good point. As soon as they go over 2500 rpm that first engine is going to self-eject itself out of the front of the car from the vibration...

@diegosilang4823 5 жыл бұрын

Never going to happened on Russian cars.

@robburdack4361 5 жыл бұрын

J B has nothing to do with the car......where rotation is used cupplings need to be perfectly centered or they will fail.... Infact the even say about the vibration.....that vibration will multiply by a magnitude for every 2000 rpm..... That being said its a interesting experiment none the less

@danieldavidson8149 5 жыл бұрын

Crank shafts bolt to the input shaft on transmissions in every car. Yes they have a clutch or a torque converter in between and they are solid as well. There is no reason this shouldn’t work as long as they are carful

@robburdack4361 5 жыл бұрын

Daniel Davidson yeah welding a pully to the outside of a gutted presure plate is nowhere even close to a clutch or a machined balanced converter...... The point is unless the milled and centered it there will be vibrations that will ultimately cause damage...... Im saying this as a person in the industry tha has spent many years building gear boxes and engines

@bfscown55 5 жыл бұрын

I love watching these guys

@salmagana2698 5 жыл бұрын

Final polish of this diamond in the rough of channel thumps up hope to see more of this type of ideas.

@andrewwilson8317 5 жыл бұрын

Two lads motors,one in front,one in back? Four wheel drive,for wheel steering! Awesome!

@blake9881 5 жыл бұрын

Never disappointed with garage 54 , keep the content coming boys 🍻🍻

@almost3pandas 5 жыл бұрын

awe yeah! i was hoping you would do this one soon.

@televisionandcheese 5 жыл бұрын

Super to see my favorite project of many engine 2105, get showed to the USA also !

@halfben7991 5 жыл бұрын

Respect from Brasil Very Very creative best channel

@mathieumelenhorst8308 5 жыл бұрын

You have my deepest respect! Lada turns out to be the most versatile car My guess would be that the acceleration drops to about 15 sec to reach 100 km/h...

@Drinnan 5 жыл бұрын

This is why I love these guys

@bencebanati 5 жыл бұрын

You guys are awesome!

@SuperOldShows 5 жыл бұрын

This is amazing! Great work and very entertaining.

@jm7210 5 жыл бұрын

Love this. Excited for the next episodes.

@malcolmhutchison62 5 жыл бұрын

Totally bonkers and awesome looking forward to next step👍

@27Zangle 5 жыл бұрын

Love these videos. Was able to microwave popcorn in the time it took the Lada to accelerate from 0-100 k/mh.

@turbo4g639 5 жыл бұрын

cant wait to see the results. should have done a before and after dyno test! love the videos

@rnsoutherland 5 жыл бұрын

This reminds me of the Packard straight 8. Those Packards where fast for there day, but the flat head had to go. Keep up the good work.

@grahammcmurran7857 5 жыл бұрын

Great build , guys ,

@Richqc4 5 жыл бұрын

Awesome 👍. You guys are great!

@andreinastase1235 5 жыл бұрын

When there is will there is a way. Great job guys.

@captnjaygreybeard6394 5 жыл бұрын

Our family owned a red Lada just like that one, then my parents got a green Samara, and my first car was a white Samara. Hello from Canada : )

@terrahawk2003 5 жыл бұрын

Straight up mad max!

@marcinkolendowicz9866 5 жыл бұрын

Can't wait to see the next episode, when the project is finished and ready for testing :-)

@987ntn 5 жыл бұрын

You can check it all now on the original channel

@xandercraw 5 жыл бұрын

lol :D All the power of the second engine is going through that little key way on the crank pulley..... whether it works or not This is Fantastic to watch :) keep it up guys love the work!!

@bmp72 5 жыл бұрын

Even got an analog clock in the dash. Used to have a 2107 as a family car growing up

@douglynn5906 5 жыл бұрын

These guys are great

@Gunzee 5 жыл бұрын

Is the blue graphic x5 and merc ml the ones at the start belong to garage 54? At 2:44 I think they go past the lada. You see them opposite lane at the outside shot. Or is that just a blue 4x4 and a black merc?

@TheKtscank 5 жыл бұрын

hi Garage 54 and my name is kevin here from new Zealand and I like you good videos

@jacobalstott7122 5 жыл бұрын

This is awesome! More please! I'm subscribing because of this video!

@yourmothersfavouritehouseguest 5 жыл бұрын

One idea, stick 2 motors side to side like a v8, it must be front wheel drive, maybe some diff welding so that the two axles spin and one motor accelerates left wheel, the other - right wheel.

@Zhdan54 5 жыл бұрын

As always crazy videos!

@lazerusmfh 5 жыл бұрын

Wow, proper metabo tools! I know I love mine.

@thoughtgrenades 5 жыл бұрын

Great content gentlemen! хорошая работа

@infl 5 жыл бұрын

you could time the 0-100 with a calendar in that thing

@bp420a5 5 жыл бұрын

That shit is BEAST!!!!!!! I want to drive it. Also want one of tho wicked Garage 54 stickers. Your guy welding is Genius. Good work fellas. Interesting as always.

@lesleymunro4964 5 жыл бұрын

This episode was awesome. I can't wait to see the results. I do think you should have used a rubber coupler, like the ones you get on propeller shaft connections, it would have soaked up some of the play, and make the engine connection more forgiving. I think 5 seconds for the 60km/h and around 15 seconds to the 100km//h - if it survives! Good luck. And thank you for the brilliant videos. Your Ideas and tests are comedy gold, yet don''t show half of the hard work and time you all put into this. Thank you

@fuzzwack1 5 жыл бұрын

you guys forgot to put the fan belt on the back engine befor it was bolted together!

@bergrud 5 жыл бұрын

Velcro. Duhhh

@memberberry8455 5 жыл бұрын

Inline 8s have alot of torque. Try pullling an Antonov. Very exciting build. 👍

@mac24seven 5 жыл бұрын

Insane. I think the vibrations are going to tear it apart. But, hey, it's insane and I love it. I think it'll do 0-100 in 15 seconds now.

@694069406940 5 жыл бұрын

love this channel

@pcuser80 5 жыл бұрын

You forgot to put the V belt on before installing the second engine.

@albertstadt9853 5 жыл бұрын

Don't need it. it only ran the alternator. The front alternator can supply for both engines if they want. Otherwise, it can run off the battery. Heck, it doesn't even have a cooling system right now. The belt is the least of its worries!

@catrielsosa9373 5 жыл бұрын

@@albertstadt9853 the original engine needs water pumping to absorb the heat, not sure if only one pump (of the second engine) will pull if the fist one isn't moving

@pauloconnor7951 5 жыл бұрын

Love it !. In Australia we wouldn't dream of doing something like that (not) we have lots of Holden 6's . A straight 12. V12 !!! :)

@ta-zm7tg 5 жыл бұрын

And this is why i'm subscribed to this channel.

@guafito 5 жыл бұрын

YESS YESS! :'D So nice! true craftsmanship

@chriscoralAloha 5 жыл бұрын

Has to be the coolest thing he has done.

@princeru3394 5 жыл бұрын

though i had that/the idea of connecting 2 engines together 2 years ago. Great Video! :)

@umbrefawx 5 жыл бұрын

believe it or not they already do this sort of thing for some rally cars. (liker the ones used to do the pikes peak run. Some of the cars have two engines, one in the front, one in the rear and each engine controls its own set of drives wheels through a special yaw control system.

@MoparStephen 5 жыл бұрын

Can't wait to see that on the track!

@kameljoe21 5 жыл бұрын

A friend of mine built a dragster with 2 pinto motors. He even built a dual turbo many years ago, even whey everyone said it would not work...

@WORDFLESHGOD 5 жыл бұрын

This is going to be brilliant! I’ve often thought about this haha

@msignal2000 5 жыл бұрын

I recon you should chop the front off at the fire wall and extend it to fit the motor (motors). After all that's what the guys at Nissan did and we ended up with the skyline. Love your channel.