I love his smile when it finally started. I was smiling too. Will try this tomorrow with mine.

Great video. I learned a lot! I'm working on my Craftsman Single Stage blower trying to get to start. This video extremely helpful.

It's almost ALWAYS a carb issue with the small 2-Stroke Tecumseh snowblower engines. 2nd common problem is usually a broken or leaking "reed" decompression valve. If everything is hunky dory with these things, they always fire up on the first or second pull.

I had at one time a Cub Cadet snow thrower. It came with electric start, never needed it because the machine always started on first pull, no matter how long it sat. As a secondary machine they are invaluable and throw the snow a long distance. I traded it in when I went to front mounted tractor machine. Still miss it.

Thanks guys

I have this snowblower, but is has the very rare alternative engine in it. Most of these snowblowers use the Briggs and Stratton R-tek series engine in them, but mine has the rare Suzuki CCR 2000 engine. They only made this engine for two years before Suzuki ended their partnership with Toro, that is why I find mine as very special.

good video I was having the same problem with my snowblower like that

Nice work! I am working my mother-in-law's CCR 2000 that won't start and have done the same things except the jet cleaning.....Thanks...Hope it works,

Thank you very much. My neighbor put his snowblower on the curb to get rid of and I picked it up. It's a Toro Powerlite Snowblower 98 CC, 2 Stroke. When I prime the fuel bulb and choke it, it will run for a second then die. So, I hope what you demonstrated will help me. I appreciate it.

good video

Nice find. Nice, useful little machine.

Great video I am having the exact same symptoms with my CCR2000 E . It seems it has too much fuel and is flooded but yet has good spark. I tried drying the plug and hole out still no start so next I will purchase new plug the maybe clean carb. or replace it will update if I get it started.

I have a toro s 200 put a new carb on still no start. Good spark new plug. Any ideas?

I haven't watched the video all the way through yet but I hope this helps! I just tore off the old fuel line, and primer line and put new ones on. Still not starting sadly. Hopefully your video helps!

I bought a bigger Toro snow blower ladt october. When the snow mounted up on the driveway i started the snow blower. It was fun. I got done in 15 minutes, where with the smaller one it took all afternoon. I only had to use it 3 times last year. Now.. this year it wont start. Seems like its not getting gas or something. Wonder what could be wrong?

I have a two stroke blower similar to that one. It runs initially but won’t keep running. It worked a bit longer a month ago but now doesn’t last long. I tried to clean out the carburetor but that didn’t do it. Similar issue, only works with choke but still dies with that but if I open and close the choke continuously then it keeps running so idk if it’s not getting fuel consistently? Idk not an engine guy. Still watching this vid currently so maybe that will give me the answer

I have a toro 3.0 hp powerlite ccr that was running with out the carb screw in then I put the spring in place will not run any tips on what to do next

I've got the same model that I picked up at the local ReStore for $25. It has been useful for several years, but when I went to start it this winter I didn't have any spark. That's the inspiration for searching what is the problemo??? I have the wet plug, i.e. fuel is getting there.

I blew a few engine with straight gas no mix 😂 it wont start sometimes if thats the case. I now use truefuel 50:1 from home depot no need to mix and it will last in blower for 2 years and in can for 5 years according to them, I also add about a half can of sea foam work wonder thank me later I learn the hard way lol

the two stroke flood very fast you put a dry spark plug in it witch was good but then you primed it that just was to much gas the best to dois take a air blower and blow to piston dry and a dry plug then try with a smal amount of primeing

I Have a craftsman four-cylinder and I can’t get it to start up I put a new spark plug them in and I still can’t get a start up I have one of those plastic keys were just have to be insert to work you don’t turn I wonder what might be the problem the problem

How to set RPM on toro CCR2000

Can a gas line be too big, too small, or to long?

Where can i buy the spark plug tester???

I’m about to take apart the carb on my craftsman Tecumseh 2 stroke snowblower. It started a couple times but now I can’t get it to do anything. One thing that I couldn’t get under control was the governor. It just kept going way too high on the rpm’s. Idle was very high too. Any ideas or tips?

You just realized its a 2 stroke? And you put straight unmixed fuel in the tank ?

20$ gets you a new everything kit.

Your arm will fall off

Junk

good video I was having the same problem with my snowblower like that