Regardless if they checked to see if they zeroed out, these guy still mounted and balanced 4 tires, and got the car on the ground in under 5 minutes. Which is pretty impressive

Im a service tech at discount tire, I am seeing very many mistakes here. You dropped the tire on its face multiple times, you didn't let the wheel spin after applying needed weights, you snap torqued like crazy, and you didn't do a torque check. You do realize people's lives are in our hands when we are servicing their car/tires. You must do a quality job and not just care about time. Time is not as important as making sure the customer is safe in their automobile.

how all my fellow discount tire employees doin

Oh and I don't want a fast mechanic, I want a skilled one that's takes pride in a job done right the first time.

I like how he throws the torque wrench on the ground. Smh

Didn't check spin tires after adding weights. Not cool, bro.

4:37 rediculous snap torquing

I would like to see this done with some Toyota Steele's

What kind of people would watch this and knock them. This was awesome. Hey you guys got my thumbs up.

And your not even check spinning on the balancer. Car prob shakes worse than a drunk waiting for the liquor store to open.

under 5 mins is great! Would love to see how long it takes to do low profile runflats with no assist arms (it takes me a while).

Regardless of the negative comments. I think this is awesome. You can tell the you guys work well together and have done this many times. Great job. I'm going to watch it again!.

I love how he just slaps the valve core back in doesn’t even recheck pressure just sends it straight on🤣

thank you ! this video should only show how fast we COULD BE ... ps: is't not a customers car

When the customer rolls in at 4:55 and you looking forward to Mexican dinner.

Okay you did it fast, but you also did it wrong! After the tires were aired up and then the valve stems were put in the tires the tires the tire pressure was not checked again to ensure pressure was still at proper level and after the tires were balanced and the weights added the balance was not double checked. It is good to be fast customers like fast in and out. But never sacrifice. A proper installation with double checking everything is done correctly is key! A improper tire installation can cause a serious accident and even possible death. If I had been standing there and saw that in my garage I would have made my guys take all the tires off and double check the pressure and the balance then put them back on before allowing the customer to leave with their car.

Nice job! I worked at Kal tire for a while and our average changeover time for a vehicle like this was 10-12 minutes. That includes paperwork. It takes alot of practice

As a crew chief for the #1 tire shop in the country as of right now, we can do a set of 4 during a tire rodeo at 3 minutes 30 seconds with a 2 man crew. Check spins and all. While I admire your speed. Yall got some work to do 😁. Take care yall.

Impressive. The only things I would have a question or doubt about are: 1. Air pressure was not double checked after the valve cores were replaced (this is best practices). 2. Balancing was not double checked (re-balancing also is best practice to ensure that the proper weight was added and that it was added on the correct location). 3. The lack of care in handling -- actually, throwing -- the torque wrench may adversely affect its calibration. I would not feel confident that the lug nuts are tightened to specs.

These guys have never been to Discount tire....They do this faster ALL DAY!

a lot of negative comments but i think they are good at what they do...they work good together

So many people upset in the comments, i doubt they’re working on someone’s actual car, it’s probably one of theirs and they just wanted to have fun and see how fast they could do it, and it’s impressive

3:41 haha dropping the weight than grabbing a new one 😂 classic

wollte euer Video gerade zulassen... Ist allerdings nicht mehr in meinen Videoantworten aufgeführt....

That was awesome, good work.

as a tire fitter myself some things bothered me. no cleaning of the rim. no checking of the balance. no sealer. chucking the torque wrench. no double checking the pressure. smh

3 things didn't do 1 paste tyres up before fitting them 2 re spon wheels to make sure balanced up ok or 000 3 never checked to see if tyres was leaking or leaking on seal

Nice job. You work really well together.

they didn't check it tire zeroed out??

Torque Limiting Extensions for the impact gun would have shaved 1-2 minutes haha! Dang that's fast though!!!

If they spin everything tire they do once you know the balance off and to help with their balance they got to do the beat on instead of the stick on. How fast are you by yourself and do right try first time?

That was slick as fuck he even grabbed the outside of the rim instead clamping from the inside like I do with steelies

Nice job boys, I've been a tire tech in the us for ten years and I know that 4 tires in under 5 min is impressive. There's a lot of negative shit talking on the comments, and I bet the shit talkers on here couldn't even get a car jacked up ant the lug nuts off even 1 tire in 5 min lol! Nice vid fellows!

Didn’t measure the wheel before dropping the lid on the balancer 🧐

I just want to know what all this heavy equipment is.

I’ve done 5 cars needing 4 tyres in 45 minutes and all alloy wheels with 2 people these boys done ok I guess faster machinery does help

and three of the wheels on that car will need to turn in the same direction. The tyres fitted are directional. oops.

Sloppy as can be. Quality is out the window here but done in 5 min.

Sheeeeesh!!!!! Love frome Richmond CA 2022!! Beast's

Thats impressive! !hope they get good tips !!!

It's called TEAMWORK!

NEEDLESS TO SAY THIS IS TIRE CHANGING AT ITS FINEST! GJ GUYS!

You guys work like such a well oiled machine wish all tyre fitters gave a shit like you guys keep it up.

Klasse Aktion :)

Pretty damn fast . I just can't be arsed going fast anymore , I know the majority of my punters quite well and we just talk away while I work away no rush no stress and customer happy .

Thats awsome!

lol fastest my ass. sloppy too no lube inflating a unrestrained tier (that gets you fired at my shop) not checking balance.

Very very nice

ok thats an idea for a new video... but it may takes some time for the next m3 with 19 or 20" :-)

How man people are tyre fitters?

Respekt für die Zeit! ABER: Ihr wollt mir jetzt erzählen das ihr den korrekten Luftdruck aufgefüllt habt und das eure Auswuchterei auch 100% passt?

Cool.

easy with those tiny little euro cars. lets see them do a dualie. lol

This is how racing should be. Instead of just zip gunning on and off. Then see what those 6&7 second tire changes turn into.

Didn't spin a 2nd time to check balance. I didn't hear a bead pop on so I'm guessing there's about 20psi in each tyre. Etc..

This is crazy with only one changer

Plus I been tyre fitter since 2003 nice to work fast but I prefer to be faster then normal but never cleaned wheels to give it good seal never checked pressure after putting valve cores in

i did 10 min. alone 4 tire mounted and balanced. all double checked pressure and balancing. that one time when the mechanic that was taking care of the inspection told me too hurry up cause the car had to be out in 15. whish I had someone to balance tires for me prob. be around the 4 min. mark but hard to say if we could beat you guys. I'll sure try soon enough even if both our mounting machine and balancing machine are a bit different from yours.

thank you for your posting :-) well, you should know that 0-5 or even 5-5 is still good enough for a speed until 200 kph. of course, porsche or other fast cars do we balance at almost 0-0 !

both back wheels were raised when torquing, but than that good job.

Didn't spin the tire after putting weight on ? Didn't torque it properly. But these guys can do a truck tire that fast probably wouldn't be able to get the bead seated

Definitely not a world record. When I was busting tires, me and my buddy started the clock when one of us yelled to the other what tires to pull and record DOT#s for as we were getting into the car to drive it to the lift and didn't stop the clock till the car was back in the parking lot. 4 minutes:47 seconds; Four new tires and stems, mounted, balanced and washed. We'd only do it for people who challenged us with a case or beer to do it in less than 5 minutes and who didn't mind a little aggressive driving in their cars. It was kind of a show management encouraged us to put on. There's just no way these 'modern' machines could keep up with a Coates 2020 in good repair and fitted with an air blast ring. That's why it so utterly irks me when I have to go into a shop, these days and wait around for over an hour (AFTER they put the car on the lift).

Wheres the lube bruh

Ive been changing tires for 3 years now and im way faster then this guy, easy 16in steel wheel no tpms , try 16in alloy or chrome with corrosion build up on beeds of rim, try 16in with tpms also

I like how they just throw the torque wrench around like its not a calibrated tool or anything.

Anyone who works at a tire shop know this was not that amazing haha trying doing this that fast while a customer bitching about there flat Repair

Now do it with a swollen 8 lug f-150 with chrome clad wheels that aren't already clean and don't scratch anything.

No lube on the tires, didnt check the spin, trusted the air pressure was correct without actually looking back at the gauge, throwing tires around and you dropped 2 tires on the rim which can damage the wheel, slow down and just do it right

is that tubeless

Tires are symmetrical and quality controlled to be round. Balance not needed with new tires. Just another charge to the customer.

Fast but to make it "legaler" (not a word yet) cars are already jacked because unless you all use the same car.......wheel nuts are checked for tightness before. All the same size tires valves etc. The balance has to be film checked for balance. Could use a hanging camera and split screen the check. And wheel nuts have to be checked for tightness after. But that wouldn't be part of the time. One gun one wheel changer one balancer. How long for just one person.......?

what kind of horse play is this!?

Also ich finds geil was ihr gemacht habt und ich denke es ist eines eurer eigenen Autos, von daher alles ok Ihr habt es euch aber auch echt leicht gemacht mit den Stahlfelgen und den Reifen Bei Alus und vernünftigem kontrollieren von Luftdruck und wuchtung sähe das natürlich anders aus, aber wenn man erfahrener ist wie ihr offensichtlich braucht man das auch nicht. Muss ich auch nicht mehr machen bei meinen Reifen Das ist aber echt ne krasse Zeit die ihr da hingelegt habt

Aside from the negative comments you guys are really good! Not everybody cahanges tires.

Seems like about an average amount of time to change tires to me...

Ok... Ist genehmigt :)

That torque wrench is fucked dude😂

Wheels all out of balance lmao

y'all in the comments are some uppity tire techs

Run flats next

Y didnt ya double spin the wheel on the balancer

Didnt see if he had the torque driver but that torque wrench is useless after using that impact gun without it

perhaps, it does look rough... but if you want set a time like this and then we will see what's really rediculous...

No one cleaned the hubs?

Speaking as a tyre fitter it's easier that it sounds 4 tyres in under 5 minuets when ther is 2 of u

Didnt recheck tire pressure, didnt check to see if tires zeroed out, tossed the torque wrench. Try a dualie and sticky weights or mud claws on 22s

Dry airing up can lead to bead leaks. Lube is always your friend.

My personal time just me is 30 mins no help from other staff. strip fit balance mount.

mine was 12 min alone with distance 10 meters from car to unmount machine and from the time i start to put the jack under the car till end....and also check the spare well ....

6 valuations disqualified

Didn't check air pressure didn't respin after adding weight oh and didn't even set dimensions on the machine!

Why throw the torque I'm cringing you guys do work well together

Are you sure they didn’t mean to type the world’s slowest ?

Hard to believe steely were easy pop the bead that fast!!

könnt ihr das bitte min runflat reifen machen ? 18 zoll :D:D:D

You guys did well. But its not a race haha. Try this on american vehicles. We do 20 inch wheels at work all day and new bmw and other crazy tires sizes.

if you checked the balance again it would not have been Good

danke :-) man könnte es noch etwas besser machen evtl auf 4:30 aber dann ist durch die maschinen ein limit gesetzt :-) ich werde das video nochmal bei dir hinzufügen :-)

I did 4 tires in 12 min by my self that included setting the rack

Nascar performance 🎭