Uh Oh! We Get A Comeback!

Рет қаралды 209,073

Ай бұрын

In a previous video several weeks ago • '15 Jeep Patriot - Cra... I had a look at this Jeep and supposedly "fix it." Well guess what. I was wrong and now it's in my lap again to find out what is really wrong with it.
-Enjoy!
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: / southmainauto
CHECK OUT OUR "SMA SWAG" STORE! Go on Teespring and get your very own SMA merch!
teespring.com/stores/the-sma-...
If you don't like Patreon feel free to use the "PayPal Me" link: www.paypal.me/SouthMainAuto
The South Main Auto Amazon Store:
www.amazon.com/shop/southmain...
AES Wave Automotive Diagnostic Tools: www.aeswave.com/cart.php?m=af...
Thank you for all the continuing support!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.

Пікірлер: 842

@wadepatton2433 Ай бұрын

Comebacks are the real teacher. Hits you right in the pocketbook and the reputation--two things that mean ALL for a small shop. Fixin' and teaching Eric, you're doing a great service for all us who learn from it-professional and otherwise.

@leftyo9589 Ай бұрын

and it doesnt matter how good you are, every now and then, one is going to bite ya in the rear.

@gimmeaford9454 Ай бұрын

It won’t hit your reputation at all if you handle it properly. Even the best mechanics in the world get comebacks.

@gieauto7175 Ай бұрын

If you never had a comeback you're probably not producing.

@wadepatton2433 Ай бұрын

@@gimmeaford9454 no doubt. Each time is an opportunity to shine (or not) by the way it is handled. Good shops, and good customers understand this.

@MrTonyPiscatelle Ай бұрын

Awesome . To see an expert in his field admit he made a mistake is proof of an honest man. My hats off to you Mr. O You're that guy !

@GipDuece Ай бұрын

The most common statement of vehicle mechanics. "Man I really hate cars!" lol

@moehoward01 Ай бұрын

The same can be said of IT guys. But about computers.

@chrism5433 Ай бұрын

I've said that more than 1 time lol. It's how it is . 🍺🍺

@bltoth1955 Ай бұрын

It’s always better when you repeat it. 😂😂😂

@applianceman6194 Ай бұрын

Same can be said of Appliance Techs.

@meme8315 Ай бұрын

Car mechanic and it guy are completely different. Unless your talking about a part changer

@loganpavelka7356 Ай бұрын

Been watching for years now. I turned this on and my 9 month old son smiles and watches it everytime now. Keep up the good work!

@Cybersawz Ай бұрын

Start'em young!

@Bugsy0333 Ай бұрын

@@Cybersawz Bullshit !

@tedcook8749 Ай бұрын

Amazing how Eric goes to the immense extra trouble of giving us clear camera views, and explanations, so we can follow this easily

@timhendley1950 Ай бұрын

"You know what we need to do with that one, (grabs relay)we need to set it over there" as he chucks it across the room...😆 That was great!

@kenchilton Ай бұрын

Another guy on KZfaq yells “Pile!” as he does that.

@JOHNMORIN100 Ай бұрын

Yeah just had to laughffff

@cullenmiller8170 Ай бұрын

I just come here for the humor and hope a car gets fixed at the same time. 🤣🤣

@tmackinator Ай бұрын

That repair was totally legit. Another example of excellent diagnosis.

@booterone1 Ай бұрын

Absolutely! Intermittent electrical issues are a challenge, even for the best mechanics.

@dwightvoeks9970 Ай бұрын

If you made some green crusty hunter t, T-shirts I would be down for one 😂 Another great sleuth hunting success.

@RickOSidhe Ай бұрын

SMA shirts with Crusty Green Huntin' Machine or with any of Eric's double entendre's or other funny asides during diagnosis would be awesome!

@jw4620 Ай бұрын

Yes!

@zedstas Ай бұрын

The classic reach around

@justsumguy2u Ай бұрын

Now that's a very solid, old-school diag done with no scan tool---love it

@markallen1782 Ай бұрын

It must be satisfying to know that your customers trust you to repair a comeback fault, and not go to another shop instead.

@ronaldderooij1774 Ай бұрын

Of course the customer comes back, the previous repair was guaranteed and thus the whole repair in this episode is free now (except of the 30 bucks relay).

@pz6316 Ай бұрын

Who paid the tow truck

@billupstateny9151 Ай бұрын

@ mark, the OTHER shops are ALL bringing their difficult repairs to SMA 🇺🇸🗽🍶👌

@InsideOfMyOwnMind Ай бұрын

@@pz6316The customer pays the tow truck. That's why warranties are called limited warranties, otherwise Eric would be paying the customer for lost wages, pain and suffering and punitive damages.

@fort147 Ай бұрын

Enough to drive you crazy!

@sheerwillsurvival2064 Ай бұрын

These are the best videos. My wife spit out her coffee when she heard BOB battery operated boyfriend. She’s still laughing. But these electrical problems are the best

@scottymoondogjakubin4766 Ай бұрын

I had a feeling that jeep would be back ! Its a jeep thing ! 😝

@johnhufnagel Ай бұрын

don't insult real jeeps like that. :D

@SteelheadTed Ай бұрын

⁠@@johnhufnagelThey are all made by Chrysler, doesn’t matter!

@tedstantz1185 Ай бұрын

It’s an automobile thing

@billybgamer5205 Ай бұрын

@@SteelheadTed Or even worse they're all FIATs!

@dalelangila9274 Ай бұрын

Jeep yup junk they are

@oldbiker9739 Ай бұрын

Man oh mam Eric just keeps digging till he gets that green gopher .

@garysparks2681 Ай бұрын

After working on computer for 60+ years, I can attest to the fact. Most people do not understand the frustration one feels when working on an intermittent. For me it started in 1963 and was still true 2 weeks ago. 😠 I'm hanging it up now at 80 years old. No more 'friends and family' repairs. Good luck to you. Enjoy your videos.

@Papawcanner Ай бұрын

I guess I’ve got three years to go .

@Large_Sarge Ай бұрын

Just wanted to stop in here and say thank you for all your content. I used your GM truck guide to change the 5.3 in my Yukon. I watched all four videos and it really helped me. It started up without a hitch.

@woodturnermark8529 Ай бұрын

I have used a 12 volt truck low air buzzer or piezo buzzer instead of a test light so I could move a harness or wiring when looking for opens and issues, while not having to watch a test light ,just listen for the beep while touching components. Great work once again Eric !!

@larrymitchell3502 Ай бұрын

Solid idea!

@christophervanzetta 25 күн бұрын

Awesome idea!

@christianheidt5733 2 күн бұрын

Yes M2!

@mannypuerta5086 Ай бұрын

The older I get, the more I miss my ‘55 Chevy when I see stuff like that. Thankfully, the wife’s 2017 Volvo at 70,000 miles has been dead reliable and not reliably dead. My dad taught me a lot in the ‘50’s and ‘60’s, but this “improved, complicated modern technology” would have driven him nuts…as it does me. I will never complain about ‘50 and ‘60 era, British, Lucas electric components again. For someone who does his own maintenance, you’re an inspiration.

@dougbledsoe259 Ай бұрын

Don't beat urself up, Eric. The green weenies are the devil. You saved the customer some money on a NEW box and a big headache wirin all that back together AND did the nice thing by leavin a note for any future folks who might be pokin around down there. AND... this was a TOTALLY proper way to go about the repair in this particular situation. Keep em comin and HAPPY EASTER to you and Mrs. O. 👍😎

@GrandadTinkerer Ай бұрын

Lol - 'Son of a frig hole'. Just got to love the invented curse words Eric!

@BigDaddy_MRI Ай бұрын

Now this was a great video. Thanks for bringing us along!! You da man, Mr. O!

@paulmaglich8504 Ай бұрын

You are the man Eric I'm retired automotive mechanic I love your videos an diagnostic ❤

@JOHNMORIN100 Ай бұрын

You are the man Eric I'm RETARDED automotive mechanic I love your videos an diagnostic

@jordanvargovich Ай бұрын

Gotta love the fact you made this video and not hid the fact that comebacks occasionally happen. Cars are a pain in the butt when it's internment problems .keep up the great videos and repairs

@efil4kizum Ай бұрын

how about a comeback from the misuse of an improper tool that damaged and smashed other pricey parts that were nearly new (a mere 3 months old and cost +400$)

@Blazer02LS Ай бұрын

Have seen that happen, someone was testing out a power probe and pushed the button while on the wrong connector. OOPs.

@applianceman6194 Ай бұрын

"Recalls", as we call them in the appliance industry, is a sad fact of being a Tech...no matter how good you are. Sometimes junk is junk.

@richardthomas1743 Ай бұрын

BOB = NOT "Battery Operated Boyfriend" 🤣

@2nickles647 Ай бұрын

Which is your phone...😅😅😅

@Grandpuba1069 Ай бұрын

Does this mean then that an ATM= titless teller?

@brianpakkala2981 Ай бұрын

Had that exact same thing happen on my '08. Luckily, I guess, I had pulled the whole from clip off earlier looking to install fog lights. I had taken the cover off and pulled a relay looking for power sources, and the jeep quit, no crank, no start. Put it back together and it worked. A year or 2 later, when the exact same symptoms occurred, I remembered the relay box. Yep, corroded pin. What a stupid place to put an electrical component. When I had the clip off earlier, I noticed how much mud and dirt were stuck in the corners. Started a yearly routine of removing the front clip in the summer and washing out all the dirt and debris. Now if I had only known about Fluid Film then. Oh well. Thanks for the channel and the content. I'm about 45min from where you are and I can relate to the weather and vehicle conditions.

@frankwise7464 Ай бұрын

My daughter has a 2011 dodge caravan that does this. then when you jump it ( but only with a jump box) im assuming it sets the relay and it starts. at least now I have a place to start to check before we buy a TIPM. chrysler vehicles !!!!

@stevecampanale8402 Ай бұрын

I had an 08 Caliber that was the exact same issue. First problem was an intermittent mil with a cooling fan code. Several months later I finally found the relay box corrosion . This car was towed in with a no crank no start. Got off the ramp truck and started up. Damn. Super frustrating.

@peacepoet1947 Ай бұрын

Electrical corrosion makes a lot of headaches for the owner and the mechanics who have to find the problem.

@bkon4675 Ай бұрын

I would say most would never find that intermitten green crusty problem. Eric, you're a true pro!

@randygutierrez4965 Ай бұрын

A man willing to admit and broadcast a comeback on KZfaq for his fans. That shows Eric is the real deal. He’s a technician we all want to be. One of the best problem solver and logical thinking technician out there.

@Prosecute-fauci Ай бұрын

Most mechanics would keep throwing random parts at it until they bankrupted their client without ever arriving at a fix. Troubleshooting is an art.

@Alexander-fr1kk 21 күн бұрын

WOW!!! I am so glad we don’t have to deal with corrosion like that here in Florida… we just have alligators and hurricanes 🤣🤣🤣

@salceti Ай бұрын

Nothing like a cup of coffee a donut and an SMA video at 6:00 am in the morning.

@richbutinski1367 Ай бұрын

Phew!!! BEAUTIFUL!!! I've used a dab of gorilla glue at the crimp to hold the pins in place without issue of removing the relays on ATV boxes...

@tonylapan5789 Ай бұрын

I've used hot glue to hold pins in place

@ronaldderooij1774 Ай бұрын

Yep, me too. Works great.

@user-gq2vn1xj2r Ай бұрын

I like this.

@Blazer02LS Ай бұрын

Yep, especially the black version used on dent pull tabs. Seems to stick to the plastic better.

@acmemachining Ай бұрын

Not a "Comeback." This is a "Customer Returned For Continue Diagnoses". Hard to find a problem when it starts working properly last visit. I had many customer state "worked good for days", but I should have known that. Good job finding problem and economical repair. Keep up the great videos and work. Thanks for sharing.

@tanaseav Ай бұрын

If you ever encounter something like this, keep the wire in place with RTV, it can be removed relatively easy, it's weatherproof, it holds good tension...:)

@johnjacobs4625 Ай бұрын

Rtv itself is corrosive

@LouJustlou Ай бұрын

The clipboard returns! I was worried Mrs O grabbed it. 😊 Thanks for the video!

@miguelruiz6691 Ай бұрын

I wish Eric was in my town, I can't find good masters of mechanics that really know their work. Hats off to you Eric.

@46fd04 Ай бұрын

Great job locating the faulty electrical contact. And another good 'McGyver' repair.

@CouchMan88 Ай бұрын

Watching your videos helped me diagnose the faulty trailer wiring on my step dad’s 03 Chevy truck. It was actually “just a fuse” which is the mechanics dream job.

@bombardier3qtrlbpsi Ай бұрын

Eric April fools are still a few days away 😅 Great job 👍

@kendavis1198 Ай бұрын

This is exactly why your customers come back to SMA!! You Take care of them as it should be. As the Old saying goes, if you don't take care of your customers..... Someone Else Will!!!! Nicely done EO. Probably will take this HEEP right to the JUNK PILE, If the FRAME don't ROT beforehand! 🤷‍♂...

@PDR-wb9dq Ай бұрын

Great video Eric, we all get a boomerang job every now and then it's par for the course, At least you admitted it and you recorded the fix, not many you-tube channels would have been so honest, all the best from the UK 👍

@RobertBancroft-fo8bz Ай бұрын

Several years ago I pulled a front tire and fender liner and worked on corroded wires on my wife's 2012 Patriot. Then a couple years ago it cost me $3000 to have the rotted whole rear end replaced. Then a year after that the shiftless transmission died. We've had two Jeeps. No more.

@LesReeves Ай бұрын

Damn you like sticking your finger in the power socket doing it twice to prove it kicks?

@acwright Ай бұрын

The pain, the shame, the comeback! Good video!

@Super8_150 Ай бұрын

The tech school says join the exciting world of vehicle maintenance. 🤣

@PatrickJago Ай бұрын

Ah…. The “take care of your wife “ reminder. Smart man.

@threeputtpar6927 Ай бұрын

I suspect that was Mrs. O's doing

@applianceman6194 Ай бұрын

She is a beautiful/ wonderful/ caring woman. Better take care of her as she does to him....of course nobody ever claimed Mr. O ignores his bride.

@3pbhenry Ай бұрын

@@applianceman6194 He'd better, otherwise BOB might enter the picture... 🫢😁

@PassiveDestroyer Ай бұрын

That seems pretty clean for a 2015 in upstate New York! Don't worry about it too much, you got it fixed now. I feel like that design is built to fail, with jumpers between relays though. I always like your explanation of the fault, the diagnosis, and the repair.

@yamisniper Ай бұрын

probly wash it all the time like my bronco sport bene 2 winters and the only real rust starting is on the muffler i try to wash it alot tho

@tomstaples8949 Ай бұрын

Noticed the note on the wall: “take care of my wife”.

@jasonmillspaw6970 Ай бұрын

As a tech myself I know how humbling comebacks can be. Hold your head up high and keep swinging. No one is perfect and hindsight is 20/20 but there is knowlage that is gained in moments like these. Thanks for the videos and keep up the good work

@OcRefrigeration Ай бұрын

Great Video ! Use Ge Clear Silicone 2 for a Less permanent cavity filler than 5 minute epoxy. turns to Clear hard rubber. still holds. but can be picked out & removed. where 5 min epoxy is permanent. i think you will like it. Great sealer to keep the green crustys away & Hold stuff in place. Ge clear silicone 2 can be had at home depot paint section. Clear = Hard clear rubber. Black & White much softer. Great video !

@MarkPdot Ай бұрын

Even as a comeback, I'd gladly pay you for that exact repair. That harness will probably last longer than the undercarriage.

@PeterJ-ij6mm Ай бұрын

This year is my 56th year in the electrical game and I can tell you that an intermittent fault is any technicians nightmare.

@douglash3129 Ай бұрын

Hi Eric, I hope the owner of this vehicle is watching, you just went way Above and beyond for them and did an outstanding job for them! You should be proud of yourself Eric! Its no wonder you have people coming out of the woodwork to get to your shop and have the job done right! Good Man!

@lvsqcsl Ай бұрын

I remember several years ago Eric was interviewed by a local news publication where he lives. He said, "We've all done dumb things. If someone hasn't done dumb things they haven't done anything at all." It really is refreshing to see him make a mistake every once and a while. GREAT VIDEO!

@gregferreira8309 Ай бұрын

You have a great deal of patience and excellent knowledge of troubleshooting

@davebarcus7118 Күн бұрын

As an Electrical Engineer and former Electronics Tech, I always say "intermittent failures are the bane of my existence". But, I learn something every time I find and correct one. Keep up the good work, Mr. O. Your troubleshooting skills never fail to impress.

@mrsemifixit Күн бұрын

Hey I’m wondering would corrosion cause an intermittent misfire only when the engine is warm? Found corrosion on the terminals connecting to the coil from the ignition module of an older distributor setup and hoping that’s the source of my issue

@davebarcus7118 Күн бұрын

@@mrsemifixit I am not a mechanic, but in my opinion, it's possible. When things get warm, they expand, and I have seen that cause issues. The clock in my 2005 Corolla would only display the time when it was cold (under 25 degrees F) outside. Using freeze spray, I was able to isolate it to a thermally intermittent diode. I replaced the diode, and it has worked ever since. The corrosion would cause a poor connection, and if it expands, it could make the connection worse. I will leave the rest up to this more experienced in ignition system diagnosis.

@23billd 12 күн бұрын

You are a very competent and ethical tech. It's especially beneficial for learning when you discuss our thoughts as you do the troubleshooting. I also admire you lack of swear words as you do each step and the car tries to bite you. I'm also non-plussed by the Chrysler engineering staff that located that junction box so low where it can be so easily exposed to weather.

@GunfighterWyo Ай бұрын

Love how you admit you made a mistake. Takes a real man in this day and time. You are a great teacher! Hope the family is well.

@TonicofSonic Ай бұрын

No he admitted to being wrong. His task was to repair the car. He sent it out running. No mistakes were made he just couldn't finish his diagnosis last time because the vehicle fixed itself.

@tarasstecy9732 Ай бұрын

I really like your attention to detail, and your concern for others that may work on a vehicle after you!

@gregoryharmon2348 Ай бұрын

Outstanding video, Eric! I fought a similar problem on one of our multi million dollar air defence systems. The green crusties mixed with fan blown dust was packed between two relay pins. Depending on humidity, the relay appeared engaged even when not commanded. replacing the relay was a non-fix. The sun came out later in the day and all is well! Next morning with the dew point up and now she's broke again. I fought that bugger for dang near two weeks.

@rjrodwell Ай бұрын

The original video of yours was the only one I can remember where you really didn't have a good explanation or hypothesis for the fault. I remember it frustrating me that the video made it seem like it just magically fixed itself. Thanks for following up and closing the loop. Best mechanic on the KZfaq!

@pdm909 Ай бұрын

Well done. The best repair and the appropriate repair aren't necessarily the same answer. Good call.

@blackdoggarage Ай бұрын

Thanks for showing us the ones that didn’t work out as well. Much respect for your talent and your character.

@jordanthomas2210 Ай бұрын

Good work!

@brucewalker1908 22 күн бұрын

Wish we had a mechanic like you where I live nice job

@jimr549 Ай бұрын

The way that engine is rapping your repair will long outlast the vehicle.😂

@aussiebloke609 Ай бұрын

When it comes to epoxy-based relay/fusebox repairs, I was taught to lightly grease the terminals, then plug them in to maintain the correct pin location. Then just turn the box over and glop in the epoxy. It'll hold the connector in the box, but the grease prevents it from messing with the relay or fuse, so they're still replaceable.

@TheDaf95xf Ай бұрын

Absolutely fantastic Eric 0 👍🏻🏴󠁧󠁢󠁥󠁮󠁧󠁿

@Armored1867 Ай бұрын

I used to have so much trouble understanding those wireing diagrams. But after watching your videos, it all makes sense now. Thank you

@JOHNMORIN100 Ай бұрын

A few zaps with your small tip solderng iron could of tightened it up--- so glad you thought of it. Mr, Magoo Milo, Maine PTL

@PaulCTownsend Ай бұрын

You definitely narrowed that right down Good job. Love the video.

@philspear73 Ай бұрын

You're a good man Eric, how many guys would show a comeback like this? Really helps out the average Joe!

@ejwxb2561 Ай бұрын

outstanding - well done Eric!

@charlespaine987 Ай бұрын

A whole lot of patience good tools and electrical diagrams . GOOD JOB!

@supersam1914 Ай бұрын

Not only is that community upstate lucky to have you but all of us on the internet who learn from these videos . It’s tough to work on all models and be able to do it successfully like your shop . So much respect for people like you . There’s no life lines when it’s your shop like working at a dealer where a job might have a Foreman etc . SMA top notch

@user-fz8yc6ru3w Ай бұрын

How is your wife doing..and family it's been a couple of years since I watched your videos and I'm back watching them again sending y'all love from Enterprise Alabama God bless y'all love brother Jimmy Wayne ❤️

@300DBenz Ай бұрын

That one pin is why I go straight to the relay anytime an ASD code pops up, or a no crank condition gets towed in, or the cooling fans stop working.

@gregdemars2751 Ай бұрын

Eric Great job!! What pain 😅😮 Greg from Minnesota

@throttlebottle5906 Ай бұрын

when you raised it on the lift, the body, suspension and everything else flexed, including the problem part. I hate when things fix themselves, even temporarily. lol

@darkerbinding6933 Ай бұрын

You're a great guy, Eric. I have said it before but No One in my area has half the conscience that you do. Sadly. It's made me do as much of my own work that I can, and I'm now too old to be rolling around on the pavement fixing things. :(

@jimrodgers3684 Ай бұрын

Eric, read your dry erase board! Number 1 on your To-Do list.

@bwalker4194 Ай бұрын

Nicely done, Mr. O. My eye, however, kept going back to that heavy gauge ground cable on top of the headlight arc. That looks to be the future of a whole number of other problems as it progresses into Stellantis Green Crustydom.

@jimbernard6112 Ай бұрын

Another repair option could have been to open up the case a bit more so the female blade terminal slipped completely through. Then splice the 2 existing jumper wires to a 6" piece of new wire. Pass that up and through the block and connect to the relay terminal before you install the relay in the block. Then feed the wire back down through the block and install the relay. That way, if someone does pull the relay in the future, the terminal attached to pin 1 comes out with it and they recognize that special care is needed.

@m1greg125 Ай бұрын

Another fine repair there Eric. The love note for any future tech just proves your a professional.

@dwight8426 Ай бұрын

Always learning from you,Thank you

@mentalmodeled Ай бұрын

I wish I could find a mechanic with your knowledge and ability in Albuquerque. As always, great job Mr. O.

@jasonhale4639 Ай бұрын

I sprayed fluid film all over the 120v AC control board in my pool chlorinator just to stop any corrosion that was on it. I covered the whole circuit board in it and reinstalled it wet. That was last spring and it ran like that all summer long with the control board soaked in fluid film so I would say that fluid film is definately not conductive in any way if it can handle house AC and not mess with the microcontroller on that board. It was completely soaked in fluid film too. I basically used it as conformal coating.

@mechanicalsuntheoneyouknow Ай бұрын

Let me just say love your videos, big fan. I’ve been using fluid film for years if the can is getting empty you just need to spray it vertically and then transition to horizontal before using it.

@david600R Ай бұрын

I struggle so much learning electric but your recent videos have been helping me quite a bit! Thank you so much 🙏🏼🙏🏼🙏🏼

@armusc757 Ай бұрын

Much respect for an honorable man. Mr O, the model of intelligence and integrity. Keep on rocking brother.

@mikemaccracken3112 Ай бұрын

Thanks for the video Eric.

@davida871 Ай бұрын

This was a great lesson to learn. Thanks Eric

@olymono2625 Ай бұрын

Always great to watch you logically with through an issue.

@jamesleach9596 Ай бұрын

I think this just goes to show what an honest business you run. We appreciate the transparency. You had every opportunity to not make this video and show that you made a mistake. We have all been there as mechanics at one time or another. I too live in the "rust belt" and have run into these types of issues too many times to count. Absolutely hate intermittent problems !

@taurus66 Ай бұрын

I been watching you work on cars and trucks for a long time and i have to tell you you are sir one hell of a mechanic

@christianheidt5733 2 күн бұрын

That was super interesting!!!

@daleburris2042 Ай бұрын

Great job Eric

@joealbert7773 Ай бұрын

Things that fix themselves during troubleshooting are the hardest problems to determine root cause. The last part of my career was teaching heavy truck mechanics how to troubleshoot electrical systems. The hands-on portion of the class involved the instructor "bugging" a vehicle and the students attempting to troubleshoot the problem. One of our instructors was working on an intermittient bug on an electronic circuit. He was using a variable resistor dialed in to get a circuit to just barely work. The problem was that the bug itself was intermittent. Once you got it dialed in perfectly and gave the vehicle to the students, the circuit always worked perfectly. There was no way for the students to verify the problem.

@oscarjones5773 Ай бұрын

I hope I age like Mr. O. Like steel in Arizona. Timeless.

@robdowns5833 Ай бұрын

You are a hell of a mechanic, very impressive.

@torymartinez2439 Ай бұрын

Man no matter what may ever come back , you are good at what you do . for sure

@petermccoll469 Ай бұрын

Nice find, Must feel great knowing you found and repaired the issue

@nottelling620 Ай бұрын

HI , your electrical troubleshooting ability is OUTSTANDING . I have an ELECTRICAL ENGINEERING BSEE and you got this stuff down. It takes a REAL HONEST MAN to due a video on a comeback. Keep these videos coming. HAPPY EASTER