Handle making tips for beginner and pro knife makers! Part 8

Рет қаралды 19,660

Жыл бұрын

What an amazing ending to a fantastic series with Harry Gough! This San Mai kitchen knife is available for sale during the time of writing and is available for purchase directly through Harry (see his Instagram below to contact him)! Thanks again all for watching and we hope you enjoyed Harry's series! See you on the next video!
FOLLOW Harry Gough: / goughcutlery
Try Oil Gun Stock Finish (and alternatives): amzn.to/3Pdll6s
Knife Handle Broach: www.gfsknifesupplies.com/Prod...
Want to re-watch the whole series or missed an episode? bit.ly/3tGbGwy
Carnauba Wax: www.amazon.co.uk/gp/search?ie... wax
Connect with a local knife maker near you directly: ukbladeshow.com/makers-near-me
Are you enjoying these knife making tips? Want us to make even more cooler videos? Support the UK Bladeshow and get a chance to win some lovely British-made knives: / ukbladeshow
EXTRA THANK YOU to our sponsors for making this videos happen! Kindly click the link below to check out what they specialise in!
Sanding Belts: (===sponsor===) GFS KNIFE SUPPLIES: www.gfsknifesupplies.com/Prod...
Single-phase Rockblade Heat Kilns: (===sponsor===) GFS KNIFE SUPPLIES: www.gfsknifesupplies.com/Prod...
Quenching Oils and Anti-Scale: (===sponsor===) GFS KNIFE SUPPLIES: www.gfsknifesupplies.com/Prod...
Carbon Steel: (===sponsor===) GFS KNIFE SUPPLIES: www.gfsknifesupplies.com/Prod...
Wooden Handles, Liners & Sheaths: (===sponsor===) GFS KNIFE SUPPLIES: www.gfsknifesupplies.com/Prod...
Buy a ready-made Damascus Billet: (===sponsor===) CLARKE KNIVES: www.clarkeknives.co.uk/shop/
Heat Treatment Services for Knife Makers: (===sponsor===) CLARKE KNIVES HEAT TREATMENT: www.vlakvarkforgeservices.co.uk
Belt Grinders: (===sponsor===) MULTITOOL PRODUCTS (UK/EUROPE): www.multitoolproducts.com/84-...
Thanks again to all our Patreon Supporters and Promoters - YOU GUYS ARE THE BEST! / ukbladeshow
Super cool UK Bladeshow OFFICIAL merchandise shirts/mugs: ukbladeshow.creator-spring.com
#handsanding #knifemaking #foodrelease

Пікірлер: 68

@mountbeckworth1 8 ай бұрын

In Australia I use an oil that is food safe.

@tobiasjagla5733 Жыл бұрын

cool job i really like your descriptions thx

@UKBladeshow Жыл бұрын

Hi again Tobias! Thanks for the comment! Hope to see you in one of our other videos again soon!

@mountainwolf1 3 ай бұрын

Now that's what I call getting a handle on things😄😄 thanks for the advice I am very grateful.

@UKBladeshow 3 ай бұрын

Happy to help!

@GrantHendrick 9 ай бұрын

Very interesting. Thank you.

@UKBladeshow 9 ай бұрын

Very welcome

@shauntheknifeguy Жыл бұрын

Great step by step,this video and the whole series with him. 🙏👏👏❤️

@UKBladeshow Жыл бұрын

Cheers Shaun! Harry is an amazing maker! Don’t forget to follow him on Instagram!

@markdarlington9914 11 ай бұрын

Thank you thoroughly enjoyed

@UKBladeshow 11 ай бұрын

Cheers Mark! We have some very cool handle-making videos with Jonas Johnson (Sweden) coming soon so hopefully you'll be looking forward to that too!

@dozukime 11 ай бұрын

I like the way you work & present, so had to sub. looking forward to more vids. Good luck.

@andyc750 Жыл бұрын

again some great tips, thanks, and knife looks brilliant

@UKBladeshow Жыл бұрын

Cheers Andy! And yes, Harry did a fantastic job with the knife and performs really well and looks amazing! Let’s help him sell it!

@tobiashangler Жыл бұрын

Absolutely great video and content, thank you!

@UKBladeshow Жыл бұрын

Cheers buddy! It was lovely to speak with you the other day mate and looking forward to speaking with you again soon!

@Samuel-sx1mq Жыл бұрын

Great video .I have made a few custom Wa handles myself and drilling out the hole was the hardest part

@UKBladeshow Жыл бұрын

Hi Samuel! Thanks for the comment! I’ve never made a Wa handle myself but I can imagine drilling a centre hole is not something you can do once and be great at it. Like any craft, practice makes perfect! Thanks again bud! - Vinz

@donsylvest7521 Жыл бұрын

Great video

@UKBladeshow Жыл бұрын

Thanks for watching Don!

@richardlawton1023 Жыл бұрын

Well done

@UKBladeshow Жыл бұрын

Thanks for taking to comment Richard!

@RobanyBigjobz Жыл бұрын

Cracking knife and a really interesting video. I always learn something good from the makers Vinz features :)

@UKBladeshow Жыл бұрын

Cheers Rob and really delighted to see you here again dude! 🎉🎉🎉

@dnarvarg 5 ай бұрын

super useful, thanks man !

@UKBladeshow 5 ай бұрын

Thanks for watching!

@russellkarvas4495 Жыл бұрын

Thank you. Well done

@UKBladeshow Жыл бұрын

Thanks for the comment Russell!

@craigkennedy6058 Жыл бұрын

I am also sold on the tru oil. Have had good results. Good video

@UKBladeshow Жыл бұрын

Cheers Craig! Glad to see you found the video valuable!

@richardtrumbo164 Жыл бұрын

Thanks friend. Great makin'! Great tips. I forge buckskinner knives mostly, but so many things apply either way. It is good to find a young craftsman who will share his craft with anyone.

@Sebastian-ed5kt Жыл бұрын

generally you can ask almost every knifemaker and he/she will answer all your questions 😉 but yeah, this unasked and awesome explanation of wisdom is absolutely awesome to have and see personally I'm trying to get everything milled and therefore all perfectly square and nicely fit p

@UKBladeshow Жыл бұрын

Like 3co said, most knife makers are happy to share ideas and tips to help each other out! What a great community we have!

@jurrian644 Жыл бұрын

Wonderful video!

@UKBladeshow Жыл бұрын

Glad you enjoyed it and thanks for taking time to leave us some feedback! If you enjoyed Harry Gough’s video, you should check out the whole series here too: Makers Gonna Make - Gough Cutlery kzfaq.info/sun/PLFssspwgISv8_4NoYI4wqEMWzwpVwvEjw

@harwoodblades3633 Жыл бұрын

Good video..lot of info there 👍

@UKBladeshow Жыл бұрын

Thanks bud! Which part of the knife making process do you enjoy watching the most from other makers?

@harwoodblades3633 Жыл бұрын

@@UKBladeshow got to be sticking Damascus in a bit of ferric 😁

@UKBladeshow Жыл бұрын

You know what, that’s A fantastic idea! I will collate videos of makers doing a ferric chloride or coffee etch! Thanks for that suggestion mate!

@harwoodblades3633 Жыл бұрын

@@UKBladeshow just on with one now..check my channel 😁all the best Lincoln 🤙👍

@benchapman5247 Жыл бұрын

You need to get yourself some Australian hardwoods if you want wood that sinks, some Ringed Gidgee or Buloke, both look fantastic and are two of the densest and hardest commercially available woods in the world (Buloke actually is the hardest). You can also make your own handle broaches easily, you can buy double sided jigsaw blades which are identical to the ones in those broaches, just make your own handle. Kincrome K21751 or Spyder 300010

@UKBladeshow Жыл бұрын

Oooo very interesting share! Thanks for this Ben! I’ll have a good research on these stuff you’ve shared! Thanks!

@harrytgough9101 Жыл бұрын

Thanks Ben! That's a really useful comment, gidgee is definitely in my top 5, never had any buloke though, I'll have to keep my eyes open. The bit about saw blades is really useful too, thanks

@dozukime 11 ай бұрын

@@harrytgough9101 If you get the extra long, it will leave a bit more meat to attach a handle.

@garygough9958 Жыл бұрын

Just came across your videos Harry, very interesting but more even interesting is my name is Gary Gough and i'm from North Queensland, Australia. My Grand Father and his brothers are originally from England. Just wondering if we are related?

@coalsauce4457 Жыл бұрын

oh nice thats hot i figured out to do it but i use a wood file instead and i always end up taking off too much handle material lol

@UKBladeshow Жыл бұрын

Small tip but quite clever isn’t it? Thanks for taking time to comment!

@coalsauce4457 Жыл бұрын

@@UKBladeshow yess the parallel marking gives unparalleled precision!

@UKBladeshow Жыл бұрын

Hahahaha

@FlyShootTravelSleepRepeat Жыл бұрын

very well explained, i will try it out. love to renovate old japan knifes Rg Bernd

@UKBladeshow Жыл бұрын

Thanks for the comment! I hope you enjoyed the rest of the series too? In case you want to binge watch them, here it is: kzfaq.info/sun/PLFssspwgISv8_4NoYI4wqEMWzwpVwvEjw

@peterrawlings9651 4 ай бұрын

Great video, mate!! I just have a question..... do you epoxy hidden tang handles at all? Or is it just the case of having a nice tight tang hole that is enough to keep the handle on the blade? I've been going down the hidden tang rabbit hole...... and there seem to be lots of different ways, lol. Thank you!

@UKBladeshow 4 ай бұрын

Thanks for watching! I don’t know the answer to your question myself but we have another video on another knife maker working with a hidden tang here: kzfaq.info/get/bejne/mMiRlZqQlqfRlIk.html

@bitsurfer0101 5 ай бұрын

Does the knife handle thickness vary quite a bit from one knife type to the next? How do you decide how thick you want to make it?

@jacksin3323 Жыл бұрын

Your methods are pretty similar to mine for a permanent handle, but as far as a "Wa" handle, i taper the tang, and split a dowel to do a compression fit inside of a single, circular drill hole. Is that austenitic stainless over monocore? Looked like some carbon jump there at the end. Sanmai/laminating is by far my favorite method.

@UKBladeshow Жыл бұрын

Hi again Jack! We couldn’t remember what kind of stainless steel was used but yes, it was a san mai sandwich construction

@lancemillward1912 3 ай бұрын

Do you pressure fit your handles?

@widneyburton5559 Жыл бұрын

Ideally you want to use gloves when finishing your handles. Whether that be with grinding or oiling, you're always going to have some kind of grime on your hands and fingers when working on anything in the shop. Even your natural skin oils can throw off the finish. However, other than that, everything about this is great! Thanks for sharing 👍

@UKBladeshow Жыл бұрын

Thanks for the input Widney! Appreciate you taking time to comment!

@widneyburton5559 Жыл бұрын

@@UKBladeshow of course! Thank you for sharing valuable information! I appreciate what you do :)

@Noone-rt6pw Жыл бұрын

Do you have your own show where you share your knife/sword making skills?

@jurrian644 Жыл бұрын

What is that tool marking the 45’s facets. The tool with the pencil? Minute 16. Tknx for the video!

@harrytgough9101 6 ай бұрын

It's called a dial indicator stand, it's a machinists measuring tool, mine was very cheap, dose a great job

@Noone-rt6pw Жыл бұрын

Why use a partial tang? Expensive alloys is understandable, yes. But even then, why not join a cheaper alloy for a full tang? Just asking, where I've had bad luck with partial tangs.