This video is really very informative. I have already built my own arcade wall mount (I have two hugly videos showing it 😅) but with the help of your videos I will build something much more better and beautiful (and bigger 😁). Thank you very much!
@crazykong1967 Жыл бұрын
Thank you for this excellent how to. I always wanted to go with RGB, but I was terrified about the actual wiring of the I-Pac 2. With the guide I feel confident on converting my panel to full RGB. If all goes well, I might convert my old SlikStic to RGB as well. Again, thank you for the clear guide!✌
@stormstillman3471 Жыл бұрын
I decided to rewatch this to get ready for my second build. I notice you talk about mapping everything to keys. I ran into trouble doing so using a u360 stick and getting buttons wired to the ultimate io to combine as a controller. Using x360ce saved alot of head aches for me and alowed me to play games from steam with no isues because alot of steam games dont enjoy multiple users using a keyboard. So hopefully that helps someone whos trying to get it to work with everything and not just emulators
@alexrobles77442 ай бұрын
Great video. I really the software would highlight the button I pressed instead of me always trying to remember it. Would be great to show if you plug in the cable in the wrong pin
@TheDanielSpies_Arcades2 ай бұрын
Yes! That is on my wishing list as well. I will talk with Andy if this would be possible. Maybe also find a way of getting X input AND LedBlinky to work on just one board.
@kibagami252 жыл бұрын
Your arcade cabinet is amazing. I am building my own and your design is making me rethink mine lol. Cup holders are genius level mouhahahah
@TheNotoriousNemo3 жыл бұрын
Thanks for making these videos, ordering from ultimarc is a 2/5 experience.
@TheDanielSpies_Arcades3 жыл бұрын
Hi, my personal experience with Ultimarc is very good, but I can imagine that the company is sometimes overflown with questions. I hope these tutorials will help out a bit! Thanks, Daniel
@zeroworldcraft2 жыл бұрын
Thank You. This thing is both expensive & overwhelming.
@carterucm Жыл бұрын
Just bought one! And, wow what a machine that is you've got there!!
@Jaysun13 жыл бұрын
Your videos are really amazing! I've been trying to purchase a custom 4 player PC based arcade from a few guys here in the USA and have been getting the run around from all of them. The only really legit sellers want like $5-$7k and that's just not in my budget. I just started looking into how to build my own and I feel like I'm in over my head. I know nothing about wiring up electronics or what parts to buy. I was considering buying one of those cabinet kits that you put together with the cam lock systems and then buying a PC loaded with Hyperspin or Launchbox from one of those ebay type sellers. Then attempt to wire up the whole thing after I purchase the buttons and joysticks etc. It just seems like a daunting task for a newbie and there doesn't seem to be any good step by step instructional videos out there. I'm telling you....if you were to do like a "How to build an arcade for dummies" type of series here on youtube, you'd have so many subscribers and views. You're really good at explaining things and seem really helpful.
@TheDanielSpies_Arcades3 жыл бұрын
Great idea. Thsnks!
@jrami2232 жыл бұрын
i can do it for 4k
@Waffle_the_Great2 жыл бұрын
If you haven't done anything yet, I can't speak to building anything but Launchbox itself it really really easy to use. You can look up ETA Prime's videos. His step by step instructions are idiot proof. Probably the hardest emulator is Daphne. Seriously, Launchbox is easy sauce to get running.
@JamesBond-kx3kl8 ай бұрын
I love this cabinet, looks like to has everything I want in my build I'm planning. Do you have plans for the build on this one you can share? Panel layout, what monitor you used, etc.?
@TheDanielSpies_Arcades8 ай бұрын
Yes, I offer design sets for any of my builds. You can get in touch by email for this: thedanielspies at gmail.com (nice name btw !!)
@tperry81303 жыл бұрын
Like the other tutorials you help explained a'lot for me thanks. I have a I-pac 4 but I will get this one for another project.
@TheDanielSpies_Arcades3 жыл бұрын
Nice! Have fun building 🕹
@chriscollingwood93893 жыл бұрын
Amazing breakdown of the Ultimate IO board - thank you so much - One question if you see this, where do I hook up Player 3 & 4's coin and start buttons? I'm lost! Thanks for all the videos....
@TheDanielSpies_Arcades3 жыл бұрын
Ah yes, you can use ANY free input and map it to the right keypress. See my latest tutorial here for more info about mapping: kzfaq.info/get/bejne/bLpzhJdj0tK6p5c.html
@WeirdVideoGames2 жыл бұрын
Hi, I'm confused about one thing and wanted to ask if you can help me. At 5:00 you're showing two different connector sizes for goldleaf or microswitch buttons. Are these two different harnesses, or does the harness have a mix of two different connectors? I see you can order a harness that has both types from Ultimarc but does that mean it only has the larger one for joysticks and the rest are smaller? Or how does it work? Can I have both goldleaf and microswitch buttons on the same console?
@TheDanielSpies_Arcades2 жыл бұрын
Hi, The goldleaf buttons have smaller pins than the microswitches. If you order a harness at Ultimarc, you can choose which buttons you are going to use. As the Joysticks have normal microswitches the harness I ordered had both sizes. Hope this makes sense :D
@WeirdVideoGames2 жыл бұрын
@@TheDanielSpies_Arcades Thanks. :) I figured it out. The answer for those who may be interested, is that the smaller size harness has larger size connectors for the joysticks, player start buttons, and coin switches. Everything else is the smaller connector for goldleaf buttons.
@GizmoMaltese3 жыл бұрын
Why are are the harness cables so short? I have a two player control panel with trackball and the cables are too short? What do I do? Should I solder extra length in between each wire? I'm a bit annoyed that they just didn't provide crimp tips and extra wiring. I'm also confused about what extension harness to buy if I go that route.
@TheDanielSpies_Arcades3 жыл бұрын
The cables are not too short in my opinion. If you mount the board in the correct place you should be fine. You could try and ask Ultimarc if there are ready to go extension wires available.. Thanks D
@GizmoMaltese3 жыл бұрын
@@TheDanielSpies_Arcades Thanks. That's what Andy told me also. But when I place the harness at the very center (which is my trackball) It barely reaches the right and left ends. I have an 8 button setup. Even if I had a slightly smaller control panel, there could be no wire management when some of the wires barely reach. They do have extensions but I think I'll just solder some extensions.
@Xlwasp3 жыл бұрын
Hi Daniel, why do you have two IO Board in your cabinet? And what is the best options to put the spinner and trackball directly to the usb port on the computer or on the IO Board?
@TheDanielSpies_Arcades3 жыл бұрын
Hi Morten, The reason is simple: each board has 96 LED outputs = 32 full RGB buttons. I have 41 buttons so I needed to have a second board :-)
@terrywalker793 жыл бұрын
@@TheDanielSpies_Arcades Just wondering..... but I see you have 41 buttons. I was wondering if I'm only going to have say 36 buttons and more than 4 of them are going to be non-led, can I just piggy-back off of a different button. For example, for my "pinball" buttons could I just jump off of a player one button? This is really the only thing I'm a little confused about. Thanks!
@crazykong19674 ай бұрын
I got a question. At 5:42 in the video the remaining unplugged connector, is that where you put the black daisy ground wire? Excellent guide, I'm just a bit confused.😵
@TheDanielSpies_Arcades3 ай бұрын
Yes correct :-)
@martinhodge394 Жыл бұрын
Thank you again!
@ReneWilsonSC2 ай бұрын
Great explanation, I have question though. What is the expansion used for? Only using 1 I-PAC io and I am running 4 player (8 buttons for player 1 and 2, and 6 buttons for player 3 and 4) I am wondering if I can use x1 and y1(trackball side) for player 3 buttons 5,6, and white and yellow (Spinner side) for player 4 buttons 5 and 6.
@TheDanielSpies_Arcades29 күн бұрын
I don’t think that will work 🤔 to be sure you should ask Andy from Ultimarc
@h0m3slic393 жыл бұрын
Your tutorials are very helpful! Do you know a place or Do you by chance have a layout for setting up 2 I-PAC Ultimate I/O. I have a 4 player controller with 6 buttons for players 3-4 and 8 buttons for player 1-2, spinner, trackball, admin buttons etc Such as for players 3-4 the two extra buttons for the bottom press, what part did you connect to on the I-PAC Ultimate I/O. And did you connect to The 2nd board? Thank you again for your awesome videos
@TheDanielSpies_Arcades3 жыл бұрын
Hi, I connected player 3, player 1 and some config buttons to the first Ipac. Player 2 and 4 (plus config buttons) to the second Ipac. Having more than 4 buttons for players 3 and 4 could be a problem I think. I never tried that.. Thanks! Daniel
@h0m3slic393 жыл бұрын
@@TheDanielSpies_Arcades Awesome. Thank you for the help.
@retsopmiful3 жыл бұрын
I'm trying so hard to get my ultimarc lux buttons and two ipac ultimate boards working. The LED's only light up on the first pin set of each side. Any help would be awesome. This has been a pain CP is 4 players spinner and trackball (hence the two boards).
@TheDanielSpies_Arcades3 жыл бұрын
This could be a defective board, wrong power supply, or lots of other stuff. You can make a video (in detail) and send it to me and I will take a look at it or, contact Andy (Ultimarc) for help. Thanks Daniel
@retsopmiful3 жыл бұрын
@@TheDanielSpies_Arcades I sent Andy and Email. I'm using the same connectors that came with the two boards. The molex connectors. the second board when connected has two that will light up at the same time, one from each side. Each button turns on when you plug them in one at a time to the top slot, but only the top slots. We just got hit with a snow storm so waiting until that goes away so I can get the connectors I need to attach the sanwa sticks to the ipac (they are the 5 pin with wires bare at the end) then I'll put it back together and see. Thanks for the fast reply.
@oodestroo Жыл бұрын
Hey Daniel, quick question. Your CP is quite large. Did you put on extensions on the main harness for the buttons? Mine literally hangs because the wires are too short to work with.
@TheDanielSpies_Arcades Жыл бұрын
Now a days I mount the ipacs closer to the buttons to do as little soldering as needed. But… i still make many custom extention wires nonetheless 😅
@nerdnout7606 Жыл бұрын
Great video, but im trying to figure out where do you plug in the menu buttons, or pinball buttons on your ipac ultimate? Been trying to find that out but to no avail
@TheDanielSpies_Arcades11 ай бұрын
You can plug them anywhere and map them inside WinIpac. I always see which ports are still available and connect them to these :-)
@Atticman13694 ай бұрын
Nice video - what about RGB configuration? I just want to be able to program the RGB only, I have a Xbox controller board for connecting the buttons.
@TheDanielSpies_ArcadesАй бұрын
Sure you can do that 👍🏼
@mattw25203 жыл бұрын
Thank you for the tutorial, can you connect three joysticks and a trackball or do you need a second controller?
@TheDanielSpies_Arcades3 жыл бұрын
Hi, yes that can be done. But then leave out your spinner :-)
@maxfowardspeed8 ай бұрын
Awesome guide! I'm looking to upgrade to this from the i-pac 4, but I need a total of 45 inputs for the joysticks and buttons. Players 1&2 have 6 buttons, 3&4 have 4 but all have a coin and start button. Can just one ultimate I/O board support this? I don't see any places for players 3/4 "coin" and "start" inputs printed on the board. Thanks!
@TheDanielSpies_Arcades8 ай бұрын
Correct, you can just choose any of the available ports for players 3 and 4. You normally need to use two Ipacs for a full 4 player setup, but without a trackball and spinner it might just work with one IO board. You can double check by asking Andy from Ultimarc.
@arthurnippalexandernikogra710 Жыл бұрын
Great video, what PC do you use or recommend.
@TheDanielSpies_Arcades Жыл бұрын
I would go for the best gaming pc you can afford, depending on the type of games you would like to play...
@TangodownNZ Жыл бұрын
Great video. I have a light gun. I am trying to get the uhid to output 5 volts when I push the trigger on the gun. I have a seperate pin allocated to this wire and I can get this pin to output 5 volts, but I can’t get it to link with the trigger. Its says in the u config manual I can do this under “uhid controlled leds” thank you
@TheDanielSpies_Arcades Жыл бұрын
Hi, I am not exactly sure what it is you are trying to do, but you can always email me and I can see if I can help! thedanielspies at gmail.com
@paulfechtmeister98932 жыл бұрын
I'm setting up a 2 player arcade with trackball and spinner. I'm having trouble with Emulationstation and setting up my player two controls. Originally my Ultimate I/O board was in keyboard mode but then I asked Ultimarc and they mentioned I should possibly have it in mode 2 Dinput... do you have experience using mode 2 or possibly mode 4 Dinput user custom with the I PAC Ultimate I/O and any thoughts as to what I'm doing wrong? Love your videos.
@TheDanielSpies_Arcades2 жыл бұрын
Hmm I don’t have experience with Emulationstation + Ipac IO boards. But I did do an Emulationstation build a few years ago with a normal Ipac 4 that did not give any problems. Email me to explain what isn’t working and I will try to help out. Thanks D
@DutchManticore Жыл бұрын
Daniel, at 5:41 you can see there are two metal prongs that the connector would fit to. How did you know which one to pick? And what is the other one for?
@TheDanielSpies_Arcades Жыл бұрын
This is just a normal switch. These two ‘prongs’ let current flow through them when the button is pressed. You need ground and signal, any orientation is fine 👌🏻
@latin625 Жыл бұрын
have a pacled64 but dont know how to do the wiring. I checked your channel but didnt find a guide. Would you recommend the pac64led or something different if I wanted to add rgb led on my xtension arcade?
@TheDanielSpies_Arcades Жыл бұрын
You can email me if you get stuck somewhere: thedanielspies at gmail. Com
@haroldgaudinier42132 жыл бұрын
Hi, Great Video, Thx. What is the black keypad thing above the second joystick? Where did you get it and what is it used for (seemed like front end launcher from the video). Thx
@TheDanielSpies_Arcades2 жыл бұрын
Ah that is the Elgato Stream Deck. You can use that to make shortcuts for almost anything :-)
@alexandrealbuquerque71893 жыл бұрын
Can it be configured to works in raspberry and works like an arcade controller separately? Example: I want to connect only player 1 on computer and play it without the raspberry operating. Im asking that because thar ultimarc io only have one usb exit, but can we choose what player to use?
@TheDanielSpies_Arcades3 жыл бұрын
I see what you want. You have a Raspberry Pi inside the control panel but would also connect it to a pc without switching usb cables? I did that in this build: kzfaq.info/get/bejne/ZseobJx3ytbWdZ8.html let me know if this is what you need? Thanks D
@A2ZGeek2 жыл бұрын
Firstly, this video is great! I have a quick question regarding the ground, I have the harness but as you mentioned it only has one ground and because all buttons need to be connected to the same ground, how did you do it?
@TheDanielSpies_Arcades2 жыл бұрын
You will need a daisy chain ground cable (or two) to connect all the buttons together and attach it to the one free ground pin on the Ultimarc board :D
@grein460872 жыл бұрын
Thanks for this video. Love the cabinet. My question is - does this only work with windows or can I also use a Pi 4 ? Many thanks in advance
@TheDanielSpies_Arcades2 жыл бұрын
Yes it works with Raspberry Pi4 as well :-)
@grein460872 жыл бұрын
@@TheDanielSpies_Arcades Very cool, thank you very much
@zaclavcanski51952 жыл бұрын
Amazing unit. I have an arcade machine but with the x-arcade controll panel which I want to update and make my own custom 2 player control pad. Can you let me know if you have a 2 player config and if you can also provide a list of parts. I love your setup and want to do the same for mine.
@TheDanielSpies_Arcades2 жыл бұрын
For two players you just need 1 Ipac! super easy. Also, buy a Hyper Arcade Systems drive from Chris that is pre-configured and you are up and running in no time.
@zaclavcanski51952 жыл бұрын
@@TheDanielSpies_Arcades Thank younfor your reply and for the info. Again, amazing work you do. Really inspired.
@payne81742 жыл бұрын
Man, you are a legend! Subbed!
@TheDanielSpies_Arcades2 жыл бұрын
Haha, I am not - but thanks!!
@kevinault94198 ай бұрын
Can the LEDs be programmed as latching for momentary press buttons ?
@TheDanielSpies_Arcades8 ай бұрын
Hi Kevin, hmm I need to think about a way... Do you have a specific scenario in mind?
@evanspeterg6 ай бұрын
How do you jump between boards in the software when you have two boards?
@TheDanielSpies_Arcades6 ай бұрын
LedBlinky will find two different boards in their software if you flash the firmware to ID1 and ID2. For WinIpac, I just pull the USB cable out of the one I don't need during setup.
@AerynGunn4 ай бұрын
Is there an ipac option for 8 button setups for players 1 and 2 and 6 buttons for players 3 and 4?
@TheDanielSpies_Arcades3 ай бұрын
Yes this is not a problem
@KRIS__B3 жыл бұрын
Thank you Thank you very much now I know what this shift key is for, I only have 32 buttons and this solution will be useful: P I have a question: Do you know how you can configure the ipac so that when you start a given game, the wheels recognize the wheels, switch between the keyboard and the pad (as you know, most new games for Pc like Mk9,11 etc only work on the pad, you cannot change the buttons on 2 players) great that Ipac is in multi mode but can you make a script etc to do it automatically ?
@TheDanielSpies_Arcades3 жыл бұрын
Hmm good question. I know that you can change the Ultimarc IO mode to via command line. I can imagine that we could run an AHK script with the start of each specific game. I don't have time to do this in my spare time but I think I can make the script. Contact me by email to further discuss. Thanks, Daniel
@wirelesscharger28282 жыл бұрын
Could I get a little assistance. This video was very helpful. I was able to get the two IO boards, buttons, joysticks, spinner and trackball set up and they work. The issue is when I go to configure buttons on retropie it will only let me Map the controls for one player because it recognizes all the buttons as keyboard and not game pad. Is there a fix for this?
@TheDanielSpies_Arcades2 жыл бұрын
Well, you could set the IO boards to X-Input mode but then the RGB function does not work anymore. 🤔 I thought that Retropie had no problems with keyboard inputs?
@cubikone6 ай бұрын
Hi, Newbie here. After doing research and watching your videos I went ahead and purchased the iPac ultimate, the gold leaf buttons and the servostiks. So…. My iPAC ultimate harness ground wire has the gold leaf size connector (small) and the daisy chain ground wire fits all the gold leaf connectors fine…. BUT the ground on the Servostick joystick switches are the larger size connectors. So basically my grounding daisy chain fits the button connectors but not the joystick ground connectors. I have another daisy chain with the larger size connectors but I don’t know what to do with it. I don’t see another ground terminal on the iPac ultimate harness. Am I supposed to bend or maybe solder the small connectors on the daisy chain to fit the joystick ground connectors? I can’t find anything online about this issue. I have hit a wall and absolutely ANY advice would be VERY much appreciated.
@TheDanielSpies_Arcades6 ай бұрын
Hi, I might make a video on that matter. For now: there are several sized crimp connectors. Goldleaf buttons use the small ones (2,8mm) , but joysticks generally use the medium ones (4,8mm). Sometimes your connectors don’t match. In that case you will need to cut the wires and solder them together indeed. Normally, if you order an Ipac at Ultimarc, you can choose the harness with the appropriate crimp connector dimensions. Most of the time no soldering needed.
@cubikone6 ай бұрын
Thanks. Yes I bought a crimp connector and added the right size connector to the daisy chain and all is well. Thanks for the reply and for creating such great and useful content. Much appreciated! 👍🏽👍🏽
@theechefcastro53402 жыл бұрын
Hello everyone I am a bit lost I need help with finding a power connector for led power I can not find one so any help would be greatful.
@TheDanielSpies_Arcades2 жыл бұрын
Hi, Send me an email with exactly what you want to do and I will help out :-) Email address is mentioned in many of my video's
@stormstillman34713 жыл бұрын
Hi how do you get 2 ultimate io boards working at the same time? I only seem to beable to do it one at a time
@TheDanielSpies_Arcades3 жыл бұрын
Hi, yes the trick is to give them a unique ID. You need to flash the firmware for that. On the Ultimarc website you can download the firmware you need. After this the pc will recognize two different boards. Thanks, Daniel
@stormstillman34713 жыл бұрын
Thank you so much!
@TheBlackshear3 жыл бұрын
Hi Daniel, great video. I had a question about your button configuration. How did you get your default colors to stay those specific colors? I was also trying to mimic an xbox controller layout but I cant get the colors to stay or show active. I also have the led blinky software installed for the front end animations so my buttons always just cycle regardless of what I have running.
@TheDanielSpies_Arcades3 жыл бұрын
Hi, I have a 'default' setting in my LedBlinky Control Config program that keeps the buttons the way I want them thru all the MAIN WHEELS. When entering a wheel then I have custom configs for all games or defaults for each emulator. Send me an email if you have anymore questions and I will try to help you :-)
@jamespalmer66297 ай бұрын
Daniel can you use a trackball on the left and on the spinner side could these be used for buttons?
@TheDanielSpies_Arcades7 ай бұрын
Yes that is possible!
@jamespalmer66297 ай бұрын
@@TheDanielSpies_Arcades thank you Daniel
@robrodz3 жыл бұрын
Does this work for retropie or does it have to be run from a pc?
@TheDanielSpies_Arcades3 жыл бұрын
Yes, Retropie will also work with the IO board. I am not sure how well LedBlinky software runs though 🤔 need to try this out some day. Thanks Daniël
@johnkenny20053 жыл бұрын
Out of curiosity, what is the benefit of going this route as opposed to the gamepad setups available on Amazon? The plug and play feature is attractive to me, but if it robs me of something I'd rather go a better route.
@TheDanielSpies_Arcades3 жыл бұрын
I heard that Gamepad setups have problems with ID's in Windows. These Ipac boards are super easy to configure, fast and come with lots of features. I really like them.
@dnas56292 жыл бұрын
what is the best joystick to use for fighting games that will work with this board?
@TheDanielSpies_Arcades2 жыл бұрын
Hi, that is of course personal preference (every joystick is compatible!) but I really like the Ultimarc Servosticks. The Magstik also seems to be a great joystick but I don't have much experience with these myself. Thanks, Daniël
@uncouthboy80282 жыл бұрын
My ultimate i/o has game mode greyed out. Why might this be? Tried it on retro pie and windows.
@TheDanielSpies_Arcades2 жыл бұрын
Hi, Modes can be switched by pressing Start1 (or user-set alternate I-PAC shift) and holding this, and Player 1 button 1 through 5, for 10 seconds. If this does not work: do you have recent firmware? Thanks, Daniel
@paulonatali5614 Жыл бұрын
Having issues installing Ultimate IO here. Tried on 2 different CPUs with Win10 and Win11 and both give a msg "driver error" on Device panel. In Control Panel says " problem with Pnp devices". Removed all harnesses, driver, tried reinstall the driver, DX driver, .NET but no lucky.
@TheDanielSpies_Arcades Жыл бұрын
You can contact Andy from Ultimarc for this. He is a great guy and is always willing to help! Let me know when the issue is solved or if you still get stuck somewhere. Kind regards, Daniel
@tiwanx3 жыл бұрын
You convince me to get this board for my arcade project I appreciate the tutorial. Also have to ask the screen for your Marquee where did you pick that up and what model is it? Thank you for the tutorial
@TheDanielSpies_Arcades3 жыл бұрын
Hi, the screen is made by IIyama, 28 ultra wide streched 1080p. Not cheap but really good 📺 thanks, D
@gofast81442 жыл бұрын
Can you set up this IPac as Xinput 1. and still use led blinky ? 2. Can I move the button layout in xinput for example I usually run LB=low punch X= medium punch A= fierce punch 3. If in xinput mode will the IPac always be player 1/2 ? Or if I turn on a separate Xbox controller can it turn into player 1 as well?
@TheDanielSpies_Arcades Жыл бұрын
No, when using XInput, the RGB functions are disabled. second question, no. :-) You can use a PACLED board for RGB of course.
@gofast8144 Жыл бұрын
@@TheDanielSpies_Arcades I thought the ultimate has RGB functions ? A pac led would be used if I had a pac mini or something with none rgb right?
@gofast8144 Жыл бұрын
@@TheDanielSpies_Arcades or you are saying a seperate led controller is needed to pull off led functions if I want to use xinput capabilities? You can’t reassign the button layout in xinput at all? I’m just trying not to buy the wrong stuff for my build. Thanks in advance for the clarification
@mauricebrown42892 жыл бұрын
On the I/O Board, where would the pinball buttons go?
@TheDanielSpies_Arcades2 жыл бұрын
Ah, you can choose any of the available inputs and then map them to the corresponding keys in WinIpac. Thanks, Daniel
@SomethingLocal25 күн бұрын
Does this software also work with the pacled64?
@TheDanielSpies_Arcades24 күн бұрын
LedBlinky works with Pacled. WinIpac is only for Ipacs as Pacled does not have player inputs
@SharkBytesKnox3 жыл бұрын
Could you please make a video how to program a 2nd board. I am having a hard time with getting my PC to recognize it and where to plug in my player 3 and 4. Or should I plug in players 1 and 3 on one board and player 2 and 4 on the other. Please help. Thanks!
@TheDanielSpies_Arcades3 жыл бұрын
Email sent 👍🏽
@MrRome2303 жыл бұрын
Could i also get an email? Thanks much!
@farksprett2 жыл бұрын
@@TheDanielSpies_Arcades i too am in the same boat and would appreciate some info on this :) Thanks
@Freezier134a2 жыл бұрын
Is there any way to make two buttons mouse buttons and still shift them for keyboard inputs?
@TheDanielSpies_Arcades2 жыл бұрын
That would be a good feature to add to the software indeed. At this moment it is not possible.
@Freezier134a2 жыл бұрын
@@TheDanielSpies_Arcades thanks for the answer! Keep up the great videos!
@stormstillman34713 жыл бұрын
Hi thank you for the tutorial. I also ordered 2 ultimate io and have the goldleaf buttons. But one thing i did not pay attention to when i ordered is the power cable for the leds. I thought it was just all powered by the usb cable. I have a gaming pc i bought and theres no way to plug in the led adaptor. How would i power this another way? Thank you
@stormstillman34713 жыл бұрын
I found out you can buy power cables that plug into the wall for the adaptors for the rgbs incase anyone is also lost
@GizmoMaltese3 жыл бұрын
You say MAME works better with keyboard inputs instead of gamepad. I'm using gamepad because I need to also play PC games like SFV and MK11. I tried mode switching but it was unreliable. I haven't noticed any issue with gamepad inputs.
@farksprett2 жыл бұрын
When i get my 2 boards I'm also planning to make them act as x-input controllers (4 "controllers" in total) so that i can play Arcade-friendly games on Windows.
@TheDanielSpies_Arcades2 жыл бұрын
You might be interested in the last part of this video: kzfaq.info/get/bejne/o59khJCcnq-4kmQ.html I am setting up UCR. This works reliable and is easy to setup!