Unique Pottery Handbuilding Process - Great TIPS and TRICKS Shared!

Рет қаралды 10,718

Күн бұрын

Ann expands her experimentation with mixing clay bodies to create an agateware-ish design on bowls. There are several unique techniques shared in this video that you can apply to many aspects of your craft...or you can just watch Ann work! Relaxing!
We typically bisque to Cone 04 and fire to Cone 5
These bowls were glazed with Amaco c-10 Clear and Ann's White Liner Glaze
Here is a link to the recipe: imgur.com/a/w8PP8Gy
Stylish T-Shirt Link: little-street-pottery.mysprea...
If you would like to BECOME A MEMBER of the the LSP Research Facility team and earn a cool title that you can put on your resume, we invite you to hit the "SUPER THANKS" button or the "Buy Ann a Coffee" button to help us unite the world through pottery. Thank you!
Check out Ann's Etsy site where you can purchase pottery made in our videos as well as other thingies: www.etsy.com/shop/LittleStree...
Ann also creates sought after custom mugs that she paints exclusively for individual clients. If you would like to learn how Ann paints with underglazes - check out her Video Workshop Series here. These workshops are very detailed (typically 1.5 - 2 hours in length) where Ann provides step by step instruction and are designed to help potters take their work to new levels of craftsmanship and artistry. vimeo.com/showcase/6725318
Here are links to some of the tools we use:
Styrofoam Mold: amzn.to/39KoL0U
Painters Trim Guard: amzn.to/39C5TAX
Hole Punchers: amzn.to/3JutWyu
Brushes Ann Uses: amzn.to/3I4E8NI
Wiggle Wire: www.sheffield-pottery.com/She...
Xiem Tools X-Bevel Bevel Cutter for Pottery and Ceramics:
amzn.to/3rZnmKi
Diamoncore Tools: diamondcoretools.com/
ProPlus Sponge: amzn.to/3x8Ye50
Best Red Ribs: amzn.to/3sU7qbF
The Cameras we use: amzn.to/3JJfGCd
Best Cheap Lens we film with: amzn.to/3I6Eljy
Best Good Lens we film with: amzn.to/3s1NuUW
#pottery
#handbuiltpottery
#handbuildingpottery
All Music used in our videos is LEGALLY LICENSED through Artlist.

Пікірлер: 40

@fruitlessbeast Жыл бұрын

Sometimes I watch with the volume off or down. So happy I had it up on this one. Your “boop” was so fun, I found myself chuckling. And then you did too! Love this as much as the great technique.

@freddiemoretti8456 2 жыл бұрын

👍on the T-shirt! Very neat ideas as usual... I have disconnected totally from Facebook freeing up a load of time. So pleased I can still stay connected with KZfaq. Cheers...Freddie

@annruel1982 2 жыл бұрын

Hi Freddie!! I have missed you and wondered where you were. Good to hear that you are doing well and that we will still see you on You Tube. 🙂

@TariHuffaker 2 жыл бұрын

Another trio of fun ideas. Thank you.

@jsud5559 2 жыл бұрын

Unbelievable. Beyond me but I so love your videos❣️

@annruel1982 2 жыл бұрын

Aww...I challenge you to give it a try J!! It is easier than you think. Have a great day and thanks for the kind words and watching!!

@helenangus1675 2 жыл бұрын

Wow! Love your work thank you for sharing.

@annruel9142 2 жыл бұрын

I appreciate that Helen. Thank you for watching and for the kind words.

@nancyltate2943 2 жыл бұрын

You are truly amazing thanks

@annruel1982 2 жыл бұрын

Hi Nancy!! Thanks so much!! I appreciate you watching!!

@darlink57 2 жыл бұрын

Love the patterns and your shirt, and especially your giggle! Thanks again, Ann!

@annruel1982 2 жыл бұрын

Haha!!! Jim gave me the video to write the script with and I couldnt resist putting in the "beep". I didnt think he would keep that in the video, haha. As for the shirt, Jim took that picture when we did the video of the altered rims and it was just so great! He then made it into a shirt for me. I think he said he put the link to the shirt in the description if anyone else wanted one.

@walkerpottery9296-Natalie 2 жыл бұрын

Oh my! Really loving these mixed clay creations! They must have taken so long to perfect. I bet this method would look neat when done with colored clays too! The zig zag one would be adorable in Easter colors cut into an egg shape. Thanks for the great ideas. Your videos always inspire me to get back to creating in my own studio. Thanks Ann! (& Jim) 🌺😊

@jimruel2121 2 жыл бұрын

Thanks...Ann really works hard to get these to production and she really did most of this on the first try! Lots of planning however 🙂

@jackiemorrison2661 2 жыл бұрын

You come up with great ideas!!!

@annruel1982 2 жыл бұрын

Aww..thanks so much Jackie. Frankly, I am surprised I have squeezed out so many ideas from my little pea brain, hahahahahahha!! As long as i can think of more ideas, we will be cranking them out!

@Sheepdog1314 2 жыл бұрын

very cool

@annruel1982 2 жыл бұрын

Yeah! Im so glad you liked it!! Thanks for watching!!!

@deborahdanhauer8525 2 жыл бұрын

Those are just cool! I love that both colors show on the back also. Those 2 zigzag patterns would look great as a platter or long flat serving dish. You could also make mountains or sea waves like that with different colored clay. What fun!🐝🤗❤️

@annruel1982 2 жыл бұрын

Oh, you are go giving me ideas Deborah!! It would be fun to do sections of the slab with the strips and then paint on the solid part!! Thanks for the inspiration!

@deborahdanhauer8525 2 жыл бұрын

@@annruel1982 You’re most welcome! Can’t wait to see how it turns out🐝🤗❤️

@annruel1982 2 жыл бұрын

@@deborahdanhauer8525 🙂

@evangeliemourouti 2 жыл бұрын

Unique! Thank you Ann!

@annruel1982 2 жыл бұрын

Hi Evangelie!! Thank you so much. This has been an idea that I have wanted to try for a long time, but didnt have the confidence to attempt. The trick was the plastic wrap and the pitcher lid for sure.

@XenobiaF 2 жыл бұрын

Beautiful!!

@annruel1982 2 жыл бұрын

Hi Xenobia!! Yeah! Thanks so much for watching and for the kind words!!!

@karen.m.sacks-handbuildwithme 2 жыл бұрын

Thanks!

@LittleStreetPottery 2 жыл бұрын

Thanks Karen! Be on the lookout for your title as a new member of the Little Street Pottery Research Facility Team!

@easterazali9237 2 жыл бұрын

They turned out great ! Super cool indeed 🤩😍

@annruel1982 2 жыл бұрын

Hi Easter Azali!! Thanks so much!! I really appreciate that!

@easterazali9237 2 жыл бұрын

@@annruel1982 💖

@juanitacaovilla536 2 жыл бұрын

Great video. Just wondering why you never showed how you finished the rim of the bowl with the brown clay. Wouldn't it have been easier to score and slip the brown rim before you put it in the mold?

@annruel1982 2 жыл бұрын

Hi Juanita. We had a very busy week and ran out of time to add the extras of adding rims and feet. I would have to really think about how to attach that rim while in the mold itself. I bet you are right, that you could do that. The way I created the foot, was to roll out a slab, then put it on a bat on the wheel and cut a small donut shape out of the slab. I then centered the bowl on top of that donut. For the rim. I rolled out a slab and placed it on top of the bowl. I pushed down on the top of the slab to connect it to the rim of the bowl, then cut the excess clay away , just leaving the clay on top of the rim. Thats it 🙂

@juanitacaovilla536 2 жыл бұрын

@@annruel1982 thanks for your reply!

@embee7434 2 жыл бұрын

Spectacular as always! I've seen you answer others already about this, but I would love to see your technique for attaching feet and rims to these slumped bowls. I've been using the foam press method to make plates and bowls recently, and I'm not happy with the feet attachment I'm getting.

@annruel1982 2 жыл бұрын

Hi Em! We have actually been thinking abut making a video of that very thing. I will bring that up to Jim. Thanks for that feedback and as always, thanks for watching Em!!!

@anushridubey6551 2 жыл бұрын

Thanks Ann for such detailed videos. I love watching the technique with your precise narration. Please make and post videos on making foot and rim. I liked the border of the zigzag bowl. How did you attach the strip ?

@annruel1982 2 жыл бұрын

@@anushridubey6551 Hi Anushri! thanks for watching the video. I am glad you liked it!! I have had other people to ask about how I attached the rim and feet too. I will definitely have to make a video showing how I did that!!! I appreciate that feedback!