Nice! I'm thinking of installing the Solar throttle body but the Eventuri is out of my budget right now but it looks and performs great. I bought a blue attack filter anf that's good enough for me for now.

Check out their reviews....its either 5 star or 1 but they were good with me, after the video they responded and gave me a small refund to cover cost of new clamp. They provide lifetime warranty and it's. Quality piece at an affordable price which is hard to find.

Wing is from Competition Carbon.

The clamp make is Evil Energy which is I found on Amazon, it's a bit more heavy duty. No heat issues, the deflector feels warm to touch but not hot, I have no concerns of heat damage to the bumper. This exhaust sounds amazing and for price cant be beat. Thank you for watching. Will make more videos on this exhaust

@@SerhansGarageone last question. Literally just got done installing mine. Love it, did you have any squeaking from the flex pipes when it got hot? Hoping it quits after a few heat cycles but I do love the exhaust, it sounds great. I had better luck with the V clamps, 0 complaints other than the squeaking and creaking. Might just be the newness

I haven't driven it yet but I will be taking it out of storage in couple days and I will post more videos soon

No it does not retain the AFM and NPP function. This exhaust is 'on' all the time. My stock exhaust did not have NPP so I needed just one pair of simulators as to avoid check engine light. No drone at high speeds on highway and I can barely tell the difference in sound from 8 to 4 cylinders while cruising on the highway. The only drone I hear is slow speeds like 20 mph and in 4 cyl eco mode. I don't experience any cabin drone when driving , especially in track mode.

@@SerhansGarage thank you very much. 1k is so much cheaper I may go with this one

Thanks. I haven't driven it yet so I cant speak for any drone - the car has been in storage in my garage over the winter but I will be taking her out of storage in about a week

@@SerhansGarage Thanks for the info. Can't wait to see a video when you get it out! That exhaust looks really good!

Saw and considered 2M Fabrication for my C8. Then noticed a vendor on eBay selling an EXACT copy of this for $950 with 4 different tip options and free shipping. Some tips had the carbon fiber overlays. Only reason I didn't buy was because I would have to buy my own AFM/NPP simulators elsewhere, and the cost about $100/2 or $200/4. Had the same stainless steel T304 build and looks like the same welds. Had the same resonators built in. eBay charges taxes nationwide now 😞, so the all up costs came out to be about the same as 2M, but had better exhaust tip options. I ultimately chose another brand, MBRP because they take the exhaust downpipes and connect to the top side of the X pipe, and that give super wide clearance compared to the 2M with runs finger width close to the frame cross member and that lower under tray panel. Some people had vibration issues when they accidentally overlooked that tight closeness and their installation touched these pieces. I didn't want any chance of that. Obviously, with close attention you can avoid this. This is a tempting option for sure. The reported lack of customer care also caused me pause. Their website kinda offends you even in their FAQ page, where they say something kinda smarta$$ about being busy manufacturing rather than being on the phone, as I recall? Anyways, I posted on Corvette Forum some weeks ago that this has to be the manufacturer of the Paragon Touring Exhaust in my opinion. 👍🏽

I can confirm that there is no drone...even in 4 cylinder mode when driving on highway in Touring mode. Sounds amazing. Will post videos soon

Thanks. Spoiler is made by Carbon Competition

Im loving the exhaust and no I am not running spacers, they are aftermarket with offsets that make tires flush with fenders.

@@SerhansGarage can you please spec the offset you have

Not really, it has more of a high pitch screech at around 3000 rpm

LMR dynod their exhaust which is identical to this exhaust and they found gains of 20 HP. In my jurisdiction there are no strict CARB requirements.

4/10 for difficulty. It took me 8 hours total but that's with me working alone and working with the camera for footage. If I were to do it all over again I would still do it myself. It's not complicated at all and there are alot of instructional videos to follow. Save your money, do it yourself and put that money towards other mods!

you got it. hardest part is holding the bumper yourself.

​@Howdy762 is true, and the foam chair I used worked perfectly for resting the bumper. Hardest part of install for me was loosening the nuts on the bottom , next time I would get a 2 foot extension and loosen them from the rear instead of from underneath the car.

Yup, same as Paragon Touring exhaust as these have the resonators at the end.

@@SerhansGarage But did Paragon come first, then 2M copied their design? I, too, am hesitant about their customer service.

For sure, I will make more videos soon when she's out of storage in the next couple of days. I can't wait

No check engine light. No heat issues and no drone

What was your question?

I have lots of air tools and electric impacts guns but sometimes I just prefer hand tools for noise and delicate work but you can never have enough power tools.

Sorry to hear you had a bad experience. They were pretty good with me, I would give them 5 stars